PA-215: Palo Alto Networks Firewall Essentials FastTrack

Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215: Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration 5 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS). Additionally Panorama and Troubleshooting are addressed.

Day 1 Module 0 – Introduction & Overview Module 1 – Administration & Management Configuration Management PAN-OS & Software Updates Service Route Configuration Log Forwarding GUI, CLI, and API Module 2 – Interface Configuration L2 & L3 Vwire Tap Interface Management in Security Zones VLANs QoS	Day 2 Module 3 – Layer 3 Configuration L3 Configuration and DHCP NAT DNS Proxy Policy Based Forwarding in Introduction to IPv6 Module 4 – App-ID App-ID Process Policy Administration Module 5 – Content-ID Antivirus Anti-spyware Vulnerability URL Filtering File Blocking and Wildfire Data Filtering DoS Protection Botnet
Day 3 Module 6 – VM Firewall Downlaod VM Template Configure ESXi Configure VM Module 7 – Decryption SSL Inbound and Outbound Module 8 – Custom Signatures Defining New Application Signatures Application Override Custom Threat ID	Day 4 Module 9 – User-ID User-ID Agent Terminal Server Agent XML API Captive Portal Module 10 – VPN and GlobalProtect Psec Tunnels GlobalProtect Agent Portal Gateway HIP
Day 5 Module 11 – High Availability Active/Passive Active/Active Module 12 – Panorama Device Groups & Objects Shared Policy Configuration Management Reporting

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!

Like the class? Then let everyone know!

Cisco

Are you looking for a Cisco Training Course?

Your organization needs qualified professionals who can design, implement, and operate Cisco multiprotocol internet works. With Cisco training from TechNow, you can gain the knowledge and experience your organization needs to succeed.

TechNow’s Cisco Training and Certification Career Path takes students from the fundamentals of networking through a complete line of Cisco courses designed to give students the knowledge and experience they need to master Cisco networking skills in a fast, thorough, and efficient manner.

Our Cisco training courses will prepare you for your work towards Cisco certification. With years of experience in the Cisco training environment, TechNow can lead you through a dynamic experience to prepare you for Cisco certification.

A list of our Cisco Courses.

P-325: Python Programming

Course Overview:

This is an introductory course into the Python scripting language. This class uses a hands-on approach in teaching the Python language. This course builds the prerequisite skills for TechNow's P-345: Python for Pentration Testers course. Getting comfortable with Python is important to understanding how Python can be utilitized for offensive measures.

This course is hands-on with the instructor walking the students through many short examples to exemplify an objective. Dexterity with the language comes through many small code examples to produce the desired result. Students have fun acquiring points for all the code examples they get correct. We must be having fun because TechNow is always amazed at how competitive students are in trying to acquire the most points!

The instructor will focus on the level that each student is currently at, and ensure the student absorbs the subject matter. Programming is not a daily tasking of administrators or offensive operators and TechNow understands that. As an instructor led course TechNow is very successful in making Python accessible to those who do not live eat and breath programming. If a student's ultimate goal is to attend a course like TechNow's P-345: Python for Pentration Testers course, then not being bogged down in the Python language is critical, and this course (P-325: Python Programming) meets that objective.

Recently we have introduced Raspberry Pi's and multiple sensors to the P-325: Python Programming course. This enables the student to actually see productive results from their coding skills in the physical world! Some examples that students create programs for are: Motion detectors, distance, temperature, cameras and keypads.

Attendees to P-325: Python Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

How Python Runs Programs
Introducing Python Object Types
- Numeric Types
- Dynamic Typing
Variables
Regular Expressions
Strings
Conditionals
- if Tests and Syntax Rules
Lists and Dictionaries
Tuples and Files
Introducing Python Statements
Assignments, Expressions, and Prints
while and for Loops
Iterations and Comprehensions
Documentation
Function Basics
Built-In Functions
Scopes
Arguments
Modules
Module Packages and Importing
Classes and OOP
Operator Overloading
Recursion
Exception Coding Details
Exception Objects
Unicode and Byte Strings
Working with Raspberry Pi
- Writing code for sensors

Prerequisites:

Experience with some form of programming is preferred

Comments

Latest comments from students

User: slewis8435

Instructor comments: Very good instructor - he was excited about the material, very knowledgeable, and explained things clearly.

Facilities comments: The facilities were fine - plenty of room for each student to set up an extra computer and have room for note taking

User: nathan.karras

Instructor comments: Instructor was extremely knowledgeable in programming and scripting. He encouraged students to explore and ask questions. He would work with individuals to troubleshoot lab problems sets. Would highly recommend as an instructor.

Facilities comments: Room got a little warn. Instructor purchased fans to cool things off for the class. Projector had over scan.

Liked the class? Then let everyone know!

N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology, from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT). Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting. This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
Configure the Firepower Management Center (FMC)
Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
Describe the Cisco Firepower Systems infrastructure
Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
Describe the System Configuration and Health policies and implement them
Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
Describe, create, and implement objects for use in Access Control policies
Create DNS and URL policies and configure Sinkholes
Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
Describe advanced policy configuration and Firepower system configuration options
Configure Malware Policies to find and stop Malware
Understand Security Intelligence, and how to configure SI to stop attacks NOW!
Configure policies to find and stop Ransomware
Understand how to fine tune IPS policies
Understand how to find tun Snort Preprocessor policies (NAP)
Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
Analyze events
Create reporting templates and schedule them
Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
Set up external authentication for users using LDAP/Realms
Configuring system integration, realms, and identity sources
Configure FMC domains and implement them
Configure FTD HA with two FTD devices
SSL Policy – decrypt your traffic
AnyConnect and Site-to-Site VPN
Understand network and host based AMP. Configure and analyze host based AMP
Understand Cisco Identity Services Engine (ISE)
Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Cisco Certified Network Associate (CCNA) certification. or equivalent
Cisco Certified Network Associate Security (CCNA Security) certification. or equivalent
Working knowledge of the Microsoft Windows operating system.

Comments

Latest comments from students

Liked the class? Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students