PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.  This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations.  PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC).  The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Active Directory and BloodHound
  • Security Controls
  • PKI
  • Encryption
  • Wireless & Network Security and Hardening DNS
  • 802.1x and Endpoint Protection
  • Firewalls and VPN
  • PowerShell Scripting
  • JEA, DSC, Enterprise Security with PowerShell
  • Windows Attack Strategies

Prerequisites:

  • Security+
  • Windows System Administration Skills

 

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class?  Then let everyone know!

N-315: Cisco Secure Virtual Private Networks

Course Overview:

This course is designed for students who intend to work with virtual private networks (VPNs) using IPSec. The course includes detailed coverage of the VPN 3000 Concentrator, a scalable remote access platform that offers encryption, high availability, and superior performance. This class is an invaluable theory and configuration guide for the VPN 3000 series of products, with its thorough coverage of concentrators, hardware clients, and software clients.

Attendees to N-315: Cisco Secure Virtual Private Networks will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Network Security & Virtual Private Network Technologies Cisco VPN 3000 Concentrator Series Hardware Overview
  • Routing on the VPN 3000
  • Configuring the Cisco VPN 3000 for Remote Access Using Pre-shared Keys
  • Configuring the Cisco VPN 3000 for Remote Access Using Digital Certificates
  • The Cisco VPN Client Firewall Feature
  • Configuring the Cisco 3002 Hardware Client for Remote Access
  • Configuring the Cisco 3002 Hardware Client for User & Unit Authentication
  • Configuring Cisco VPN Clients for Backup Server, Load Balancing & Reverse Route Injection
  • Configuring the Cisco 3000 Concentrator for IPSec over TCP & UDP
  • Configuring LAN-to-LAN VPNs on the Cisco 3000
  • Network Monitoring & Administration Troubleshooting

Prerequisites:

  • Students who attend this advanced course must have experience in configuring Cisco IOS software
  • CCNA certification
  • Basic knowledge of the Windows operations system
  • Familiarity with the networking & security terms & concepts

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-949: Certified Firewall Analyst Course

Course Overview:

This is a hands-on course that covers many of the concepts of securing the perimeter of an organization. This includes concepts such as intrusion detection, packet filtering, and central logging.

A skills focus enables the student to better absorb the subject matter and perform better on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Firewalls.

This course is an excellent precursor to PA-215 Palo Alto Firewall Essentials FastTrack.

Attendees to TN-949: Certified Firewall Analyst Prep will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Analyzing Network and Wireless Design
  • Creating and Auditing a Rulebase
  • Firewall Assessment and Penetration Testing
  • Host-Based Detection and DLP
  • Incident Detection and Analysis
  • IOS and Router Security
  • IPv6 and ICMPv6
  • Log Collection and Analysis
  • NAT and Proxies
  • Netfilter IPtables
  • Network Access Control
  • Network-Based Intrusion Detection
  • Packet Filters and Inspection
  • Packet Fragmentation
  • Perimeter Concepts and IP Fundamentals
  • Securing Hosts and Services
  • TCP/IP Protocols
  • VPN Design and Auditing
  • VPN Implementation

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking and security  experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-963: Windows Security Automation with PowerShell

Course Overview:

PowerShell is made for Security Operations (SecOps) automation on Windows. SecOps requires automation in order to scale out security changes and monitoring beyond a handful of hosts. For example, when a vulnerability must be remediated but there is no patch for it yet, automation is needed to quickly and consistently enact the changes necessary. PowerShell “remoting” is encrypted remote command execution of PowerShell scripts in a way that can scale to thousands of endpoints and servers.

Imagine being able to hunt for indicators of compromise across thousands of machines with just a few lines of PowerShell code. Or imagine having the local Administrator account password reset every night on thousands of endpoints in a secure way, and being able to retrieve that password securely too.

We will show you to do these tasks and more. Transcription logging for forensics, strong encryption code signing, application whitelisting of scripts, IPSec port control, and Just Enough Admin (JEA).

As more and more of our systems are moved up to the cloud, PowerShell will become even more important. Amazon Web Services, Microsoft Azure, Office 365, Hyper-V and VMware already support PowerShell administration for many tasks.

Attendees to TN-963: Windows Security Automation with PowerShell will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 3 days

Course Objectives:

Day One
PowerShell Overview and Tips

    • Getting started running commands
    • Using and updating the built-in help
    • Execution policies
    • Fun tricks with the ISE graphical editor
    • Piping .NET and COM objects, not text
    • Using properties and methods of objects
    • Helping Linux admins feel more at home
    • Aliases, cmdlets, functions, modules, etc.
    • Customizing your profile script

What Can We Do With PowerShell

    • PowerShell remote command execution
    • Fan-out remoting and security
    • File copy via PowerShell remoting
    • Capturing the output of commands
    • Parsing text files and logs with regex patterns
    • Searching remote event logs faster with XPath
    • Mounting the registry as a drive
    • Exporting data to CSV, HTML and JSON files
    • Parsing and mining nmap port scanner XML output
    • Running scripts as scheduled jobs
    • Pushing out scripts through Group Policy
    • Importing modules and dot-sourcing functions
    • http://www.PowerShellGallery.com

Write your own scripts

    • Writing your own functions
    • Passing arguments into your scripts
    • Function parameters and returning output
    • Flow control: if-then, do-while, foreach, switch
    • The .NET Framework class library: a playground
    • How to pipe data in/out of your scripts

Day Two
Continuous Secure Configuration Enforcement

    • How to use Group Policy and PowerShell together
    • Automate with INF security templates
    • How to customize INF templates
    • Microsoft Security Compliance Manager (SCM)
    • SECEDIT.EXE scripting
    • Building an in-house security repository for SecOps/DevOps
    • NSA’s Secure Host Baseline GPOs

Group Policy Precision Targeting

    • Managing Group Policy Objects (GPOs) with PowerShell
    • LSDOU, Block Inheritance, Enforced GPOs
    • Group Policy permissions for targeting changes
    • ADMX templates for mass registry editing
    • Deploying PowerShell startup and logon scripts
    • WMI item-level targeting of GPO preferences
    • GPO scheduled tasks to run PowerShell scripts
    • Remote command execution via GPO (not remoting)
    • Empowering the Hunt Team to fight back!

Server Hardening for SecOps/DevOps

    • Server Manager scripting with PowerShell
    • Adding and removing roles and feature
    • Remotely inventory roles, features, and apps
    • Why Server Nano or Server Core
    • Running PowerShell automatically after service failure
    • Service account identities, passwords, and risks
    • Tools to reset service account passwords securely

Day Three
PowerShell Desired State Configuration (DSC)

    • DSC is Configuration Management built in for free
    • Using DSC for continuous reinforcement of settings
    • Writing your own DSC configuration scripts
    • Free DSC resource modules: www.PowerShellGallery.com
    • How to push DSC configurations to many targets
    • DSC background job processing in push mode
    • Examples: sync files, install roles, manage groups
    • Auditing a remote target against a DSC MOF template
    • “ApplyAndAutoCorrect” mode for continuous enforcement

PowerShell Just Enough Admin (JEA)

    • JEA is Windows sudo, like on Linux
    • JEA is Windows setuid root, like on Linux
    • Restricting commands and arguments
    • Verbose transcription logging
    • How to set up and configure JEA
    • Privilege Access Workstations (PAWs)

PowerShell and WMI

    • Windows Management Instrumentation (WMI) service
    • What is WMI and why do hackers abuse it so much?
    • Using PowerShell to query WMI CIM classes
    • WMI authentication and traffic encryption
    • Inventory operating system versions and installed software
    • WMI remote command execution versus PowerShell remoting
    • PowerShell security best practices
    • PowerShell transcription logging to catch hackers

Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class?  Then let everyone know!