Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       

Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!

Course Overview:

The Implementing Cisco Enterprise Wireless Networks (ENWLSI) course gives you the knowledge and skills needed to create a secure wireless network infrastructure and troubleshoot any related issues. You’ll learn how to implement and fortify a wireless network infrastructure using Cisco Identity Service Engine (ISE), Cisco Prime Infrastructure (PI), and Cisco Connect Mobile Experience to monitor and troubleshoot network issues.

Attendees to N-515: Implementing Cisco Enterprise Wireless Network (ENWLSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-430 Implementing Cisco Enterprise Wireless Networks (ENWLSI) exam, which is part of the CCNP® Enterprise certification and the Cisco Certified Specialist – Enterprise Wireless Implementation certification.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Implement network settings to provide a secure wireless network infrastructure
  • Implement a secure wireless client and troubleshoot wireless client connectivity issues
  • Implement and troubleshoot QoS in wireless networks
  • Implement and troubleshoot advanced capabilities in wireless network services

Prerequisites:

 

Comments

Latest comments from students


Liked the class?  Then let everyone know!

Course Overview:

This is a hands-on course that covers many of the concepts of securing the perimeter of an organization. This includes concepts such as intrusion detection, packet filtering, and central logging.

A skills focus enables the student to better absorb the subject matter and perform better on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Firewalls.

This course is an excellent precursor to PA-215 Palo Alto Firewall Essentials FastTrack.

Attendees to TN-949: Certified Firewall Analyst Prep will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Analyzing Network and Wireless Design
  • Creating and Auditing a Rulebase
  • Firewall Assessment and Penetration Testing
  • Host-Based Detection and DLP
  • Incident Detection and Analysis
  • IOS and Router Security
  • IPv6 and ICMPv6
  • Log Collection and Analysis
  • NAT and Proxies
  • Netfilter IPtables
  • Network Access Control
  • Network-Based Intrusion Detection
  • Packet Filters and Inspection
  • Packet Fragmentation
  • Perimeter Concepts and IP Fundamentals
  • Securing Hosts and Services
  • TCP/IP Protocols
  • VPN Design and Auditing
  • VPN Implementation

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking and security  experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students


Liked the class?  Then let everyone know!

Course Overview:

This course will cover topics to ensure that students have the technical knowledge and skills required to conceptualize, design, and engineer secure solutions across complex enterprise environments.  Students will be able to apply critical thinking and judgement across a broad spectrum of security disciplines to propose and implement solutions that map to enterprise drivers.  This course will prepare students for the objectives covered in the CompTIA CASP+ certification exam (CAS-004).

Attendees to CT-425: CompTIA Advanced Security Practitioner (CASP+) will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time Event
03/10/2025 - 03/14/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX
06/09/2025 - 06/13/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX
09/15/2025 - 09/19/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX
12/08/2025 - 12/12/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

  • Support IT governance in the enterprise with an emphasis on managing risk
  • Leverage collaboration tools and technology to support enterprise security
  • Use research and analysis to secure the enterprise
  • Integrate advanced authentication and authorization techniques
  • Implement cryptographic techniques
  • Implement security controls for hosts
  • Implement security controls for mobile devices
  • Implement network security
  • Implement security in the systems and software development lifecycle
  • Integrate hosts, storage, networks, applications, virtual environments, and cloud technologies in a secure enterprise architecture
  • Conduct security assessments
  • Respond to and recover from security incidents

Prerequisites:

Completion of the following or equivalent knowledge:

CompTIA Certification: A+ Essentials

CompTIA Certification: Security+

Comments

Latest comments from students


User: clbrack

Instructor comments: I expect to pass, another great class from technow!


User: christopher0470

Instructor comments: Alan takes the time to cover the material so that you understand the concepts and applications of the information presented.

Facilities comments: I like the location. It was quiet and very conducive to learning.


Liked the class?  Then let everyone know!

  

Course Overview: 

Learn to protect yourself and your company against hackers, by learning their tools and techniques, and then testing your network.  This course is heavily based on Kali and primarily on Metasploit.  In TN-515: Implementing Cybersecurity and Information Assurance Methodologies class you will learn the step by step process that hackers use to assess your enterprise network, probe it & hack into it, utilizing a mixed-platform target environment including Windows, Linux, Solaris, and Cisco.  This course is 90% hacking, but  defenses for demonstrated hacks will be discussed.  If you want to know the ins and outs of the hacks presented in this course, then this is the course for you.

Attendees to TN-515: Implementing Cybersecurity and Information Assurance Methodologies Class Attendees will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introduction to Pen Testing using the PTES model
  • Metasploit Basics
    • MSFconsole, MSFcli, Armitage, MSFpayload, MSFencode, NasmShell
  • Intelligence Gathering
    • Nmap, Databases in Metasploit, Port Scanning with Metasploit
  • Quick Intro to Ruby
    • Writing a simple Ruby script to create a custom scanner
  • Vulnerability Scanning
    • Importing Nessus Results
    • Scanning with Nessus from Within Metasploit
  • Exploitation
    • Using the Metasploit Framework and console to exploit
  • Meterpreter
    • Compromising a Windows System
    • Attacking MS SQL, xp_cmdshell
    • Dumping Usernames and Passwords, extracting and dumping hashes
    • Pass the Hash and Token Impersonation
    • Pivoting
    • Railgun
    • Using Meterpreter Scripts: Migrating a process, Killing AV, Persistence
  • Avoiding Detection
    • Creating Stand-Alone Binaries with MSFpayload
    • Encoding with MSFencode and Packers (go Green Bay:)
  • Exploitation Using Client Side Attacks
    • Introduction to Immunity Debugger
    • Using Immunity Debugger to Decipher NOP Shellcode
  • Metasploit Auxiliary Modules
  • Social Engineer Toolkit (SET)
    • Spear-Phishing, Web Attack
    • Creating a Multipronged Attack
  • Creating Your Own Module
    • Adapt an existing Module
    • Add some PowerShell and Run the Exploit
  • Meterpreter Scripting
  • Capture The Flag Exercise

Prerequisites:

  • This is an advanced  Cybersecurity and Information Assurance Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • An understanding of TCP/IP

Comments

Latest comments from students


  

Liked the class?  Then let everyone know!