Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting.  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration 5 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  Additionally Panorama and Troubleshooting are addressed.

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students



User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!


Like the class?  Then let everyone know!

 

Course Overview:

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies is the big picture overview of a SOC, other courses provide a deep dive into the technologies that a SOC may utilize. This course addresses the internal workings of staff, skills required, required authorizations, internal agreements, and setting appropriate expectation levels of a SOC within budget constraints. A SOC is not a one size fits all, the instructor has decades of security experience and brings to the table opportunities to discuss what can work within constraints. Many organizations are coming to the realization that some level of a SOC is now required and to learn just what decisions need to be made: Out-sourced, In-sourced, budgets, capabilities and many more. Students leave with a worksheet of how to progress when they get back to their organization.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies – Is a course that incorporates lecture, demos, and group exercises for standing up a Security Operations Center (SOC). Students learn strategies and resources required to deploy, build, and run Network Security Monitoring (NSM) and work roles and flows for a SOC. No network is bullet proof and when attackers access your network, this course will show you options and resources to build a security net to detect, contain, and control the attacker. Examples on what it takes to architect an NSM solution to identify sophisticated attackers and a response strategy. Properly implemented detection and response technologies is integral to incident response and provides the responders timely information and tools to react to the incident. Effective demonstrations are given of Open Source technologies that build up a SOC, but any software can be used and demonstrations are provided to demonstrate technology families not push a specific solution.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies demonstrations utilize a cyber range that gives each student in-depth knowledge of monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls; and software and services to provide orchestrate Incident Response, Intelligence Analysis, and Hunt Operations.

Attendees to TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies class will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 2 Days

Course Objective:

    • To provide management an overview of what it takes to stand up a SOC.

Prerequisites:

  • Students should have an understanding of the security field.

Course Outline:

  • What threats does my organization care about?
  • What does a threat look like?
  • What does a threat look like?
  • How to present the SOC internally.
  • Communication with Stakeholders and Executives
  • Leveraging and integrating existing security measures
  • People
    • Establishing a skill matrix and work roles for SOC members
    • Establishing a training path
    • Personnel background requirementsProcesses
  • Processes
    • Alignment to standards: NIST, PCI, HIPAA, etc.
    • Risk related decision trees
    • Playbooks
    • Threat Intelligence Integration
  • Technology – Tool Suites to Support:
    • Ethical Hacking
    • Network Security Monitoring and SIEM
    • Forensics
    • Dashboards
    • Analysis and Hunting
    • Incident Management and Ticketing

 

Comments

Latest comments from students


 

Liked the class?  Then let everyone know!

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       

Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!

Course Overview:

This course will cover topics to ensure that students have the technical knowledge and skills required to conceptualize, design, and engineer secure solutions across complex enterprise environments.  Students will be able to apply critical thinking and judgement across a broad spectrum of security disciplines to propose and implement solutions that map to enterprise drivers.  This course will prepare students for the objectives covered in the CompTIA CASP+ certification exam (CAS-004).

Attendees to CT-425: CompTIA Advanced Security Practitioner (CASP+) will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time Event
03/10/2025 - 03/14/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX
06/09/2025 - 06/13/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX
09/15/2025 - 09/19/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX
12/08/2025 - 12/12/2025
09:00 -17:00
CT-425: CompTIA Advanced Security Practitioner (CASP+)
TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

  • Support IT governance in the enterprise with an emphasis on managing risk
  • Leverage collaboration tools and technology to support enterprise security
  • Use research and analysis to secure the enterprise
  • Integrate advanced authentication and authorization techniques
  • Implement cryptographic techniques
  • Implement security controls for hosts
  • Implement security controls for mobile devices
  • Implement network security
  • Implement security in the systems and software development lifecycle
  • Integrate hosts, storage, networks, applications, virtual environments, and cloud technologies in a secure enterprise architecture
  • Conduct security assessments
  • Respond to and recover from security incidents

Prerequisites:

Completion of the following or equivalent knowledge:

CompTIA Certification: A+ Essentials

CompTIA Certification: Security+

Comments

Latest comments from students


User: clbrack

Instructor comments: I expect to pass, another great class from technow!


User: christopher0470

Instructor comments: Alan takes the time to cover the material so that you understand the concepts and applications of the information presented.

Facilities comments: I like the location. It was quiet and very conducive to learning.


Liked the class?  Then let everyone know!

 

 

 

 

 

 

 

Course Overview:

The Computer Hacking Forensic Investigator (CHFI) course delivers the security discipline of digital forensics from a vendor-neutral perspective. CHFI is a comprehensive course covering major forensic investigation scenarios and enabling students to acquire necessary hands-on experience with various forensic investigation techniques and standard forensic tools necessary to successfully carry out a computer forensic investigation leading to the prosecution of perpetrators.

The CHFI certification gives participants the necessary skills to perform an effective digital forensics investigation. CHRI presents a methodological approach to computer forensics including searching and seizing, chain-of-custody, acquisition, preservation, analysis and reporting of digital evidence

What’s Included:

  • 5 days of instructor-led in classroom training
  • Detailed Labs for hands-on learning experience; approximately 50% of training is dedicated to labs
  • Hundreds of investigation tools including EnCase, Access Data FTL, & ProDiscover
  • Huge cache of evidence files for analysis including RAW, .dd images, video & audio files, MS Office files, systems files, etc.
  • CHFI Courseware
  • Exam Voucher
  • CHFI onsite exam scheduling

Course Objectives:

  • Establish threat intelligence and key learning points to support pro-active profiling and scenario modeling
  • Perform anti-forensic methods detection
  • Perform post-intrusion analysis of electronic and digital media to determine the who, where, what, when, and how the intrusion occurred
  • Extract and analyze of logs from various devices like proxy, firewall, IPS, IDS, Desktop, laptop, servers, SIM tool, router firewall, switches AD server, DHCP logs, Access Control Logs & conclude as part of investigation process
  • Identify & check the possible source/ incident origin
  • Recover deleted files and partitions in Windows, MAC OS X, and Linux
  • Conduct reverse engineering for known and suspected malware files
  • Collect data using forensic technology methods in accordance with evidence handling procedures, including collection of hard copy and electronic documents

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

    • Module 01. Computer Forensics in Today’s World
    • Module 02. Computer Forensics Investigation Process
    • Module 03. Understanding Hard Disks and File Systems
    • Module 04. Data Acquisition and Duplication
    • Module 05. Defeating Anti-forensics Techniques
    • Module 06. Operating System Forensics (Windows, Mac, Linux)
    • Module 07. Network Forensics
    • Module 08. Investigating Web Attacks
    • Module 09. Database Forensics
    • Module 10. Cloud Forensics
    • Module 10. Malware Forensics
    • Module 11. Investigating Email Crimes
    • Module 12. Investigating Email Crimes
    • Module 13. Mobile Forensics
    • Module 14. Forensics Report Writing and Presentation

 

Prerequisites:

      • 2+ years of proven information security work experience
      • Educational background with digital security specialization

    Target Audience:

      • Law Enforcement
      • Defense & Military
      • E-Business Security
      • Systems Administrators
      • Legal Professionals
      • Banking & Insurance professionals
      • Government Agencies
      • IT Managers

  • Comments

    Latest comments from students


    Liked the class?  Then let everyone know!