N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Course Overview:

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.

Attendees to N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) will receive TechNow approved course materials, expert instruction, and prepare you to take the 350-401 Implementing Cisco® Enterprise Network Core Technologies (ENCOR) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
Troubleshoot Layer 2 connectivity using VLANs and trunking
Implementation of redundant switched networks using Spanning Tree Protocol
Troubleshooting link aggregation using Etherchannel
Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
Describe the virtualization technology of servers, switches, and the various network devices and components
Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
Describe wireless roaming and location services
Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-Shared Key (PSK) wireless client authentication on a WLC
Troubleshoot wireless client connectivity issues using various available tools
Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
Explain basic Python components and conditionals with script writing and analysis
Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
Describe APIs in Cisco DNA Center and vManage

Prerequisites:

CCNA certification
Implementation of Enterprise LAN networks
Basic understanding of Enterprise routing and wireless connectivity
Basic understanding of Python scripting

Comments

Latest comments from students

User: don.seguin

Instructor comments: Tim was a great.

Facilities comments: The classroom was great.

User: jrtrussell

Instructor comments: Awesome

Facilities comments: Great

Liked the class? Then let everyone know!

TN-545: Certified Network Defender

Course Overview:

This course is instructed with an instructor in the classroom with provided lab equipment and Cyber Range.

Students enrolled in the Certified Network Defender course, will gain a detailed understanding and hands on ability to function in real life situations involving network defense. They will gain the technical depth required to actively design a secure network in your organization. This program will be akin to learning math instead of just using a calculator.

This course gives you the fundamental understanding of the true construct of data transfer, network technologies, software technologies so that you understand how networks operate, understand what software is automating and how to analyze the subject material.

You will learn how to protect, detect and respond to, and predict threats on the network. This builds upon the typical knowledge and skills of Network Administrators in network components, traffic, performance and utilization, network topology, system locations, and security policies.

You will learn network defense fundamentals, the application of network security controls, protocols, perimeter appliances, secure IDS, VPN and firewall configuration. You will then learn the intricacies of network traffic signature, analysis and vulnerability scanning which will help you when you design greater network security policies and successful incident response plans. These skills will help you foster resiliency and continuity of operations during attacks.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

What’s Included:

EC-Council official E-Courseware
EC-Council iLabs access included for 6 months
EC-Council official Certificate of Attendance
CND Exam Voucher with 1 FREE RETAKE VOUCHER

Security Course Flow

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

Module 01. Network and Defense Strategies
Module 02. Administrative Network Security
Module 03. Technical Network Security
Module 04. Network Perimeter Security
Module 05. Endpoint Security-Windows Systems
Module 06. Endpoint Security- Linux Systems
Module 07. Endpoint Security- Mobile Devices
Module 08. Endpoint Security- IoT Devices
Module 09. Administrative Application Security
Module 10. Data Security
Module 11. Enterprise Virtual Network Security
Module 12. Enterprise Cloud Network Security
Module 13. Enterprise Wireless Network Security
Module 14. Network Traffic Monitoring and Analysis
Module 15. Network Logs Monitoring and Analysis
Module 16. Incident Response and Forensic Investigation
Module 17. Business Continuity and Disaster Recovery
Module 18. Risk Anticipation with Risk Management
Module 19. Threat Assessment with Attack Surface Analysis
Module 20. Threat Prediction with Cyber Threat Intelligence

Prerequisites:

Basic network and host operations knowledge
Experience commensurate with one to five years of network, host, or application administration
TN-325:Security+ or equivalent

Courses to follow:

Target Audience:

Network Administrators, Network Security Administrators, Network Security Engineer, Network Defense Technicians, Network Analyst, Security Analyst, Security Operator, and anyone involved in network operations

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-125: Introduction to UNIX and Linux

Course Overview:

This hands-on course provides an intensive overview of fundamental UNIX commands that are common to all flavors of UNIX, but the focus is on RedHat. At the end of this course students will have a firm grasp of how the UNIX operating system works, how to accomplish powerful functions using multiple commands & most importantly of all, how to think UNIX. With the skills gained in this course, students can move on to RedHat System Administration I or Linux System Admnistration I.

Attendees of TN-125: Introduction to UNIX and Linux will receive course materials and expert Instruction.

Date/Locations:

Date/Time	Event
01/27/2025 - 01/31/2025 08:00 -16:00	TN-125: Introduction to UNIX and Linux TechNow, Inc, San Antonio TX
05/05/2025 - 05/09/2025 08:00 -16:00	TN-125: Introduction to UNIX and Linux TechNow, Inc, San Antonio TX
11/03/2025 - 11/07/2025 08:00 -16:00	TN-125: Introduction to UNIX and Linux TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

Unix Overview
Introduction to the UNIX command Line
Managing and controlling access to files
Batch Scripting and tools
Regular Expressions, Pipelines, and IO Redirection
Text File Manipulation
Basic Network Commands
Managing Unix Processes
GNOME Graphical Desktop

Prerequisites:

Basic Knowledge of Computers

Comments

Latest comments from students

User: trkdashin

Instructor comments: Very knowledgeable

Facilities comments: Nice Hotel

Liked the class? Then let everyone know!

Programming

TechNow offers the full gamut of programming languages from ANSI C and C++ to the various Microsoft .Net languages (Visual Basic, C# and C++). If you are completely new to programming, TechNow offers courses that demonstrate the fundamentals to get you started.

If you prefer Unix/Linux, we offer Shell Programming, as well as, Perl and Python. We also offer courses in the web development languages, such as, Java Servlets, JSP, and ASP .Net.

The following is a list of our Programming training courses:

TN-215: Shell Programming

Course Overview:

This intensive hands-on class teaches students to develop customized UNIX™ commands, read & write Bourne, Korn & Bash Shell scripts & automate critical server functions. The course includes extensive lab exercises, including hands-on development & debugging of shell scripts, which will give students the ability to be more efficient and productive in less time. The focus of the course will be the Bash shell.

Attendees to TN-215: Shell Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Shell Review
Shell Interpretation of Quotes & Backslash
The Bash Shell
Shell’s combined with UNIX utilities
Programming Basics
Data Constructs
Programming Looping
Your Environment
More on Parameters
Advanced Shell Programming