Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students


User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.


Liked the class?  Then let everyone know!

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications.  In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP.   Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations.  Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny.  Other protocols such as Nortel's UNIStim will be addressed.  As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures.   Various open source tools including those in BackTrack are used for VoIP attacks.  A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • VoIP Architecture
  • VoIP Signaling and media protocols
  • Common VoIP authentication mechanisms
  • Common VoIP encryption techniques
  • VoIP protocol analysis with Wireshark
  • Maintaining QoS while mitigating DoS
  • VoXML, XML, and application integration security
  • Converged network security design and implementation
  • Impact of NAT and firewalls
  • SIP, H.323, and MGCP vulnerabilities
  • VPN, IPsec and SRTP to secure VoIP services
  • Penetration testing with open source tools
  • Attacks for Eavesdropping, call redirection, and DoS
  • Design of hacked firmware virtualization layer
  • Concise lockdown steps for network hardware and VoIP

Prerequisites:

  • This is an advanced Information Security Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • As well as an understanding of TCP/IP

Comments

Latest comments from students


Liked the class?  Then let everyone know!

 

Course Overview:

CT-225: Network+ is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client. The course also helps to prepare students for three popular certification examinations: CompTIA Network+, Microsoft Networking Essentials, and Novell Networking Technologies.

Attendees to CT-225: Network+ will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time Event
01/13/2025 - 01/17/2025
08:00 -16:00
CT-225: Network+
TechNow – San Antonio, TX, San Antonio TX
04/28/2025 - 05/02/2025
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX
08/25/2025 - 08/29/2025
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX
12/15/2025 - 12/19/2025
08:00 -16:00
CT-225: Network+
TechNow, Inc, San Antonio TX

Duration 5 days

Course Objectives:

  • Identify basic network theory concepts and major network communications methods
  • Describe bounded network media
  • Describe unbounded network media
  • Identify the major types of network implementations
  • Identify TCP/IP addressing and data delivery methods
  • Analyze routing and switching technologies
  • Identify the components of a TCP/IP implementation
  • Analyze network security
  • Implement network security
  • Identify the components of a WAN implementation
  • Identify the components used in cloud computing and virtualization
  • Identify the components of a remote network implementation
  • Manage networks
  • Troubleshoot network issues

Prerequisites:

Comments

Latest comments from students


User: hanbri9

Instructor comments: Great instructor.

Facilities comments: BEST HOTEL!!!!!!! AMAZING LOCATION, GOOD FOOD, NICE SPACE. The location of the hotel is what is almost the best about it. Driving up hwy 10 in the morning is absolutely awful.



 

Like the class?  Then let everyone know!

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       

Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!

  

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

  

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:  

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


  

Like the class?  Then let everyone know!