Course Overview: PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course combines PA-213 and PA-212 and adds a half day introduction to Panorama and Troubleshooting.  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-232: Palo Alto Networks Panorama Manage Multiple Firewalls. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications. Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration 5 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  Additionally Panorama and Troubleshooting are addressed.

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students



User: rod3535@gmail.com

Instructor comments: Instructor was great, he explained everything and made sure we understood the process's/product. He also took time out of his own schedule to help set up a VM environment on our personal pc's.

Facilities comments: Facility was great, enjoyed feeding the deers!


Like the class?  Then let everyone know!

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.

Attendees to TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Accessing the Network
  • Advanced Fuzzing Techniques
  • Advanced Stack Smashing
  • Attacking the Windows Domain – Enumeration
  • Attacking the Windows Domain – Restricted Desktops
  • Attacking the Windows Domain – The Attacks
  • Building a Metasploit Module
  • Crypto for Penetration Testers
  • Exploiting the Network
  • Fuzzing Introduction and Operation
  • Introduction to Memory and Dynamic Linux Memory
  • Introduction to Windows Exploitation
  • Manipulating the Network
  • Python and Scapy For Penetration Testers
  • Shellcode
  • Smashing the Stack
  • Windows Heap Overflow Introduction
  • Windows Overflows

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students


User: ryanv

Instructor comments: Great.

Facilities comments: N/A. Hotel.


User: sean.hollinger

Instructor comments: Instructor is technically knowledgeable as he has been on every course I've taken with TechNow.

Facilities comments: adequate


Liked the class?  Then let everyone know!

 

Course Overview:

The HCISPP is the only certification that combines cybersecurity skills with privacy best practices and techniques. It demonstrates you have the knowledge and ability to implement, manage, and assess security and privacy controls to protect healthcare organizations using policies and procedures established by the cybersecurity experts at (ISC)2. TechNows HCISPP Certification Boot Camp is a comprehensive review of Healthcare cybersecurity with privacy best practices & industry best practices.

Attendees to TN-8155: HCISPP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction..

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Strategically focus your preparation for HCISPP Certification
  • Cover a broad spectrum of topics in the 7 domains of the HCISPP Common Body of Knowledge (CBK)
  • Gain knowledge on the Healthcare industry including third party relationships and health data management concepts
  • Identify applicable regulations, compliance frameworks, privacy principles and policies to protect information security
  • Develop risk management methodology and identify control assessment procedures

Audience:

  • The HCISPP certification is ideal for security professionals responsible for safeguarding protected health information (PHI). Take this HCISPP training course to prepare to manage and implement security controls for healthcare information. HCISPPs are instrumental to a variety of job functions: Compliance Officer, Information Security Manager, Privacy Officer, Compliance Auditor, Risk Analyst, Medical Records Supervisor, IT Manager, Privacy & Security Consultants, and Health Information Manager.

Comments

Latest comments from students


 

Liked the class?  Then let everyone know!

Course Overview:

Certified in Risk and Information Systems Control (CRISC), is for professionals responsible for an organization's risk management program.  Students looking to acquire CRISC qualify themselves as IT security analyst, security engineer architect, information assurance program manager and senior IT auditor.  CRISC certified professionals manage risk, design and oversee response measures, monitor systems for risk, and ensure the organization's risk management strategies are met.

The CRISC exam will primarily align with the terminology and concepts described in The Risk IT Framework, The Risk IT Practioner Guide, and COBIT 5.  This will include applications in the evaluation and monitoring of IT-based risk, as well as the design and implementation of IS controls. 

The CRISC exam covers four domains that are periodically updated to reflect the changing needs of the profession:

  • Domain 1: Risk Identification 
  • Domain 2: Risk Assessment
  • Domain 3: Risk Response and Mitigation
  • Domain 4: Risk and Control Monitoring and Reporting

This course is designed to assist in your exam preparation for the CRISC exam.

Attendees to TN-835: Certified in Risk and Information Systems Control (CRISC) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Risk IT Framework—Purpose and Principles
  • Essentials of Risk Governance, Evaluation, and Response
  • Risk and Opportunity Management Using CobiT, Val IT and Risk IT
  • The Risk IT Framework Process Model Overview
  • Managing Risk in Practice—The Practitioner Guide Overview
  • Overview of the Risk IT Framework Process Model 
  • The Risk IT Framework

Prerequisites:

A minimum of at least three (3) years of cumulative work experience performing the tasks of a CRISC professional across at least three (3) CRISC domains is required for certification. There are no substitutions or experience waivers.

Comments

Latest comments from students


User: tracycampbell

Instructor comments: Dave had great command of the class and the flow of information. The lessons seem relevant to the exam and the course material should assist greatly with passing. As a bonus, his breakdown of PKI helped with my current job requirements.

Facilities comments: The Home2Suites by Hilton was FANTASTIC!



Liked the class?  Then let everyone know!

Course Overview:

This course will provide students with proficiency in the everyday management of Linux based clients and basic management of server system. Students will learn the knowledge and tools necessary to manage Linux systems from the command line, as well as how to manage user administration, file permissions, software configurations, and Linux based clients, server systems and security.  Let us help you prepare for the CompTIA Linux+ exam (XK0-005).

TechNow is a CompTIA partner and uses official CompTIA Linux+ curriculum.

Attendees to CT-245: Linux+ will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Perform basic Linux tasks
  • Manage users and groups
  • Manage permissions and ownership
  • Manage storage
  • Manage files and directories
  • Manage kernel modules
  • Manage the Linux boot process
  • Manage system components
  • Manage devices
  • Manage networking
  • Manage packages and software
  • Secure Linux systems
  • Write and execute Bash shell scripts
  • Automate tasks
  • Plan and perform a Linux installation

Prerequisites:

 

Comments

Latest comments from students


User: cwbrind

Instructor comments: Great experience with Mr. Peterson, would recommend again. Highly knowledgable and approachable for any subject.

Facilities comments: The Holiday Inn was a nice location for learning despite traffic around the area.



Liked the class?  Then let everyone know!