Course Overview:

TN-813: Certified in Governance, Risk, and Compliance (CGRC) course is for the (ISC)²® Certified in Governance, Risk, and Compliance (CGRC) credential previously known as Certified Authorization Professional (CAP). This course walks the student through the Risk Management Framework following practices the NIST pubs. CGRC is an objective measure of the knowledge, skills and abilities required for personnel involved in the process of certifying and accrediting security of information systems. Specifically, this credential applies to those responsible for formalizing processes used to assess risk and establish security requirements. Their decisions will ensure that information systems possess security commensurate with the level of exposure to potential risk, as well as damage to assets or individuals.The CGRC credential is appropriate for civilian, state and local governments in the U.S., as well as commercial markets. CGRC certification applies to job functions such as authorization officials, system owners, information owners, information system security officers, and certifiers.  CGRC is crucial to the Management staff.

This course is the “why” of the entire security field. It provides a logical way of allocating resources where there is greatest risk and why we make the decisions we make in the field of security. It is TechNow’s view that of all the security courses we have seen, this course genuinely puts the “big picture” of security in front of the students. Students actually come to an understanding of truly what is critical to security of an enterprise versus a bunch of nuts and bolts of security.

TechNow’s CGRC course covers all of the (ISC)²® CGRC 7 Knowledge domains:

  • Security and Privacy Governance, Risk Management, and Compliance Program
  • Scope of the System
  • Selection and Approval of Framework, Security, and Privacy Controls
  • Implementation of Security and Privacy Controls
  • Assessment/ Audit of Security and Privacy Controls
  • System Compliance
  • Compliance Maintenance

RMF Related Steps

  • Prepare – Process Initiation
  • Categorize Information Systems
  • Establish the Security Control Baseline
  • Apply Security Controls
  • Assess Security Controls
  • Authorize Information System
  • Monitor Security Controls

TechNow’s CGRC Instructors have extensive knowledge and experience in the field, and have been working with organizations to build assessor teams for over 20 years.

Attendees to TN-813: Certified in Governance, Risk, and Compliance (CGRC) will receive TechNow authorized training materials, including access to the documentation of the CGRC Exam domains, and expert instruction.

Dates/Locations:

No Events

Duration: 3 Days

Course Objectives:

  • Initiate the Preparation Phase
  • Perform Execution Phase
  • Perform Maintenance Phase
  • Understand the Purpose of Security Authorization

Prerequisites:

  • IT Security
  • Information Assurance
  • Information Risk Management certification and systems administration
  • 1-2 years of general experience technical experience
  • 2 years of general systems experience
  • 1-2 years of Database/Systems Development/Network Experience
  • Information Security Policy Experience

Comments

Latest comments from students




Liked the class?  Then let everyone know!

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.

Attendees to TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Accessing the Network
  • Advanced Fuzzing Techniques
  • Advanced Stack Smashing
  • Attacking the Windows Domain – Enumeration
  • Attacking the Windows Domain – Restricted Desktops
  • Attacking the Windows Domain – The Attacks
  • Building a Metasploit Module
  • Crypto for Penetration Testers
  • Exploiting the Network
  • Fuzzing Introduction and Operation
  • Introduction to Memory and Dynamic Linux Memory
  • Introduction to Windows Exploitation
  • Manipulating the Network
  • Python and Scapy For Penetration Testers
  • Shellcode
  • Smashing the Stack
  • Windows Heap Overflow Introduction
  • Windows Overflows

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students


User: ryanv

Instructor comments: Great.

Facilities comments: N/A. Hotel.


User: sean.hollinger

Instructor comments: Instructor is technically knowledgeable as he has been on every course I've taken with TechNow.

Facilities comments: adequate


Liked the class?  Then let everyone know!

Are you looking for a Cisco Training Course?

Your organization needs qualified professionals who can design, implement, and operate Cisco multiprotocol internet works.  With Cisco training from TechNow, you can gain the knowledge and experience your organization needs to succeed.

TechNow’s Cisco Training and Certification Career Path takes students from the fundamentals of networking through a complete line of Cisco courses designed to give students the knowledge and experience they need to master Cisco networking skills in a fast, thorough, and efficient manner.

Our Cisco training courses will prepare you for your work towards Cisco certification.  With years of experience in the Cisco training environment, TechNow can lead you through a dynamic experience to prepare you for Cisco certification.

A list of our Cisco Courses.

in   

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom.  Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

 Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

    • Identify the components of a computer network and describe their basic characteristics
    • Understand the model of host-to-host communication
    • Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
    • Describe LANs and the role of switches within LANs
    • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
    • Install a switch and perform the initial configuration
    • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
    • Describe the TCP/IP Transport layer and Application layer
    • Explore functions of routing
    • Implement basic configuration on a Cisco router
    • Explain host-to-host communications across switches and routers
    • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
    • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
    • Describe the operation, benefits, and limitations of static routing
    • Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
    • Describe the application and configuration of inter-VLAN routing
    • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
    • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
    • Configure link aggregation using EtherChannel
    • Describe the purpose of Layer 3 redundancy protocols
    • Describe basic WAN and VPN concepts
    • Describe the operation of Access Control Lists (ACLs) and their applications in the network
    • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
    • Describe basic Quality of Service (QoS) concept
    • Describe network and device architectures and introduce virtualization
    • Introduce the concept of network programmability and Software-Defined Networking (SDN)
    • Configure basic IOS system monitoring tools
    • Describe the management of Cisco devices
    • Describe the current security threat landscape
    • Describe threat defense technologies
    • Implement a basic security configuration of the device management plane
    • Implement basic steps to harden network devices

Lab Objectives:

      • Get started with Cisco Command-Line Interface (CLI)
      • Observe How a Switch Operates
      • Perform Basic Switch Configuration
      • Implement the Initial Switch Configuration
      • Inspect TCP/IP Applications
      • Configure an Interface on a Cisco Router
      • Configure and Verify Layer 2 Discovery Protocols
      • Implement an Initial Router Configuration
      • Configure Default Gateway
      • Explore Packet Forwarding
      • Troubleshoot switch Media and Port Issues
      • Troubleshoot Port Duplex Issues
      • Configure Basic IPv6 Connectivity
      • Configure and Verify IPv4 Static Routes
      • Configure Iv6 Static Routes
      • Implement IPv4 Static Routing
      • Implement IPv6 Static Routing
      • Configure VLAN and Trunk
      • Troubleshoot VLANs and Trunk
      • Configure a Router on a Stick
      • Implement Multiple VLANs and Basic Routing Between the VLANs
      • Configure and Verify Single-Area OSPF
      • Configure and Verify EtherChannel
      • Improve Redundant Switched Topologies with EtherChannel
      • Configure and Verify IPv4 ACLs
      • Implement Numbered and Named IPv4 ACLs
      • Configure a Provider-Assigned IPv4 Address
      • Configure Static NAT
      • Configure Dynamic NAT and Port Address Translation (PAT)
      • Implement PAT
      • Log into the WLC
      • Monitor the WLC
      • Configure a Dynamic (VLAN) Interface
      • Configure a DHCP Scope
      • Configure a WLAN
      • Define a Remote Access Dial-In User Service (RADIUS) Server
      • Explore Management Options
      • Explore the Cisco DNA Center
      • Configure and Verify NTP
      • Configure System Message Logging
      • Create the Cisco IOS Image Backup
      • Upgrade Cisco IOS Image
      • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
      • Secure Console and Remote Access
      • Enable and Limit Remote Access Connectivity
      • Secure Device Administrative Access
      • Configure and Verify Port Security
      • Implement Device Hardening

Prerequisites:

      • Familiarity in the following networking topics:
        • TCP/IP
        • IP Configuration
        • Peer-to-Peer Networking
        • Subnetting
        • Building a Routing Table
      • It is not required but highly recommended to have the following certifications:

Comments

Latest comments from students


User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.


User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments


Liked the class?  Then let everyone know!

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom.  Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

    • Identify the components of a computer network and describe their basic characteristics
    • Understand the model of host-to-host communication
    • Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
    • Describe LANs and the role of switches within LANs
    • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
    • Install a switch and perform the initial configuration
    • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
    • Describe the TCP/IP Transport layer and Application layer
    • Explore functions of routing
    • Implement basic configuration on a Cisco router
    • Explain host-to-host communications across switches and routers
    • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
    • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
    • Describe the operation, benefits, and limitations of static routing
    • Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
    • Describe the application and configuration of inter-VLAN routing
    • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
    • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
    • Configure link aggregation using EtherChannel
    • Describe the purpose of Layer 3 redundancy protocols
    • Describe basic WAN and VPN concepts
    • Describe the operation of Access Control Lists (ACLs) and their applications in the network
    • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
    • Describe basic Quality of Service (QoS) concept
    • Describe network and device architectures and introduce virtualization
    • Introduce the concept of network programmability and Software-Defined Networking (SDN)
    • Configure basic IOS system monitoring tools
    • Describe the management of Cisco devices
    • Describe the current security threat landscape
    • Describe threat defense technologies
    • Implement a basic security configuration of the device management plane
    • Implement basic steps to harden network devices

Lab Objectives:

      • Get started with Cisco Command-Line Interface (CLI)
      • Observe How a Switch Operates
      • Perform Basic Switch Configuration
      • Implement the Initial Switch Configuration
      • Inspect TCP/IP Applications
      • Configure an Interface on a Cisco Router
      • Configure and Verify Layer 2 Discovery Protocols
      • Implement an Initial Router Configuration
      • Configure Default Gateway
      • Explore Packet Forwarding
      • Troubleshoot switch Media and Port Issues
      • Troubleshoot Port Duplex Issues
      • Configure Basic IPv6 Connectivity
      • Configure and Verify IPv4 Static Routes
      • Configure Iv6 Static Routes
      • Implement IPv4 Static Routing
      • Implement IPv6 Static Routing
      • Configure VLAN and Trunk
      • Troubleshoot VLANs and Trunk
      • Configure a Router on a Stick
      • Implement Multiple VLANs and Basic Routing Between the VLANs
      • Configure and Verify Single-Area OSPF
      • Configure and Verify EtherChannel
      • Improve Redundant Switched Topologies with EtherChannel
      • Configure and Verify IPv4 ACLs
      • Implement Numbered and Named IPv4 ACLs
      • Configure a Provider-Assigned IPv4 Address
      • Configure Static NAT
      • Configure Dynamic NAT and Port Address Translation (PAT)
      • Implement PAT
      • Log into the WLC
      • Monitor the WLC
      • Configure a Dynamic (VLAN) Interface
      • Configure a DHCP Scope
      • Configure a WLAN
      • Define a Remote Access Dial-In User Service (RADIUS) Server
      • Explore Management Options
      • Explore the Cisco DNA Center
      • Configure and Verify NTP
      • Configure System Message Logging
      • Create the Cisco IOS Image Backup
      • Upgrade Cisco IOS Image
      • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
      • Secure Console and Remote Access
      • Enable and Limit Remote Access Connectivity
      • Secure Device Administrative Access
      • Configure and Verify Port Security
      • Implement Device Hardening

Prerequisites:

      • Familiarity in the following networking topics:
        • TCP/IP
        • IP Configuration
        • Peer-to-Peer Networking
        • Subnetting
        • Building a Routing Table
      • It is not required but highly recommended to have the following certifications:

Comments

Latest comments from students


User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material


User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.


Liked the class?  Then let everyone know!