N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

CT-245: Linux+

Course Overview:

This course will provide students with proficiency in the everyday management of Linux based clients and basic management of server system. Students will learn the knowledge and tools necessary to manage Linux systems from the command line, as well as how to manage user administration, file permissions, software configurations, and Linux based clients, server systems and security. Let us help you prepare for the CompTIA Linux+ exam (XK0-005).

TechNow is a CompTIA partner and uses official CompTIA Linux+ curriculum.

Attendees to CT-245: Linux+ will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Perform basic Linux tasks
Manage users and groups
Manage permissions and ownership
Manage storage
Manage files and directories
Manage kernel modules
Manage the Linux boot process
Manage system components
Manage devices
Manage networking
Manage packages and software
Secure Linux systems
Write and execute Bash shell scripts
Automate tasks
Plan and perform a Linux installation

Prerequisites:

CompTIA A + certification or equivalent experience

Comments

Latest comments from students

User: cwbrind

Instructor comments: Great experience with Mr. Peterson, would recommend again. Highly knowledgable and approachable for any subject.

Facilities comments: The Holiday Inn was a nice location for learning despite traffic around the area.

Liked the class? Then let everyone know!

PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content. This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications. Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

Module 0 – Introduction & Overview
Mod 1: Advanced Interface
- Configuration
- Advanced NAT
- Policy-Based
- Forwarding
- Routing Protocols (OSPF)
Mod 2: App-ID™ –
- Custom Applications
- Defining New Application Signatures
- Application Override
Mod 3: Advanced Content-ID™
- Custom Threat Signatures
- Data Filtering
- DoS Protection
- Botnet Report
Mod 4: Advanced User-ID™
- Terminal Server Agent
- Captive Portal
- XML API

Day 2

Mod 5: Quality of Service
- Configuring Quality of Service
Mod 6: GlobalProtect™
- Implementation of GlobalProtect
- Install and Configure Portal, Gateway, and Agents
Mod 7: Monitoring and Reporting
- Log Forwarding
- SNMP
- Reporting
Mod 8: Active/Active High Availability
- Configuring Active/Active HA

Prerequisites:

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-963: Windows Security Automation with PowerShell

Course Overview:

PowerShell is made for Security Operations (SecOps) automation on Windows. SecOps requires automation in order to scale out security changes and monitoring beyond a handful of hosts. For example, when a vulnerability must be remediated but there is no patch for it yet, automation is needed to quickly and consistently enact the changes necessary. PowerShell “remoting” is encrypted remote command execution of PowerShell scripts in a way that can scale to thousands of endpoints and servers.

Imagine being able to hunt for indicators of compromise across thousands of machines with just a few lines of PowerShell code. Or imagine having the local Administrator account password reset every night on thousands of endpoints in a secure way, and being able to retrieve that password securely too.

We will show you to do these tasks and more. Transcription logging for forensics, strong encryption code signing, application whitelisting of scripts, IPSec port control, and Just Enough Admin (JEA).

As more and more of our systems are moved up to the cloud, PowerShell will become even more important. Amazon Web Services, Microsoft Azure, Office 365, Hyper-V and VMware already support PowerShell administration for many tasks.

Attendees to TN-963: Windows Security Automation with PowerShell will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 3 days

Course Objectives:

Day One
PowerShell Overview and Tips

- Getting started running commands
- Using and updating the built-in help
- Execution policies
- Fun tricks with the ISE graphical editor
- Piping .NET and COM objects, not text
- Using properties and methods of objects
- Helping Linux admins feel more at home
- Aliases, cmdlets, functions, modules, etc.
- Customizing your profile script

What Can We Do With PowerShell

- PowerShell remote command execution
- Fan-out remoting and security
- File copy via PowerShell remoting
- Capturing the output of commands
- Parsing text files and logs with regex patterns
- Searching remote event logs faster with XPath
- Mounting the registry as a drive
- Exporting data to CSV, HTML and JSON files
- Parsing and mining nmap port scanner XML output
- Running scripts as scheduled jobs
- Pushing out scripts through Group Policy
- Importing modules and dot-sourcing functions
- http://www.PowerShellGallery.com

Write your own scripts

- Writing your own functions
- Passing arguments into your scripts
- Function parameters and returning output
- Flow control: if-then, do-while, foreach, switch
- The .NET Framework class library: a playground
- How to pipe data in/out of your scripts

Day Two
Continuous Secure Configuration Enforcement

- How to use Group Policy and PowerShell together
- Automate with INF security templates
- How to customize INF templates
- Microsoft Security Compliance Manager (SCM)
- SECEDIT.EXE scripting
- Building an in-house security repository for SecOps/DevOps
- NSA’s Secure Host Baseline GPOs

Group Policy Precision Targeting

- Managing Group Policy Objects (GPOs) with PowerShell
- LSDOU, Block Inheritance, Enforced GPOs
- Group Policy permissions for targeting changes
- ADMX templates for mass registry editing
- Deploying PowerShell startup and logon scripts
- WMI item-level targeting of GPO preferences
- GPO scheduled tasks to run PowerShell scripts
- Remote command execution via GPO (not remoting)
- Empowering the Hunt Team to fight back!

Server Hardening for SecOps/DevOps

- Server Manager scripting with PowerShell
- Adding and removing roles and feature
- Remotely inventory roles, features, and apps
- Why Server Nano or Server Core
- Running PowerShell automatically after service failure
- Service account identities, passwords, and risks
- Tools to reset service account passwords securely

Day Three
PowerShell Desired State Configuration (DSC)

- DSC is Configuration Management built in for free
- Using DSC for continuous reinforcement of settings
- Writing your own DSC configuration scripts
- Free DSC resource modules: www.PowerShellGallery.com
- How to push DSC configurations to many targets
- DSC background job processing in push mode
- Examples: sync files, install roles, manage groups
- Auditing a remote target against a DSC MOF template
- “ApplyAndAutoCorrect” mode for continuous enforcement

PowerShell Just Enough Admin (JEA)

- JEA is Windows sudo, like on Linux
- JEA is Windows setuid root, like on Linux
- Restricting commands and arguments
- Verbose transcription logging
- How to set up and configure JEA
- Privilege Access Workstations (PAWs)

PowerShell and WMI

- Windows Management Instrumentation (WMI) service
- What is WMI and why do hackers abuse it so much?
- Using PowerShell to query WMI CIM classes
- WMI authentication and traffic encryption
- Inventory operating system versions and installed software
- WMI remote command execution versus PowerShell remoting
- PowerShell security best practices
- PowerShell transcription logging to catch hackers

Prerequisites:

GSEC or equivalent experience
UNIX, Windows, Networking, and Security Experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-949: Certified Firewall Analyst Course

Course Overview:

This is a hands-on course that covers many of the concepts of securing the perimeter of an organization. This includes concepts such as intrusion detection, packet filtering, and central logging.

A skills focus enables the student to better absorb the subject matter and perform better on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Firewalls.

This course is an excellent precursor to PA-215 Palo Alto Firewall Essentials FastTrack.

Attendees to TN-949: Certified Firewall Analyst Prep will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Analyzing Network and Wireless Design
Creating and Auditing a Rulebase
Firewall Assessment and Penetration Testing
Host-Based Detection and DLP
Incident Detection and Analysis
IOS and Router Security
IPv6 and ICMPv6
Log Collection and Analysis
NAT and Proxies
Netfilter IPtables
Network Access Control
Network-Based Intrusion Detection
Packet Filters and Inspection
Packet Fragmentation
Perimeter Concepts and IP Fundamentals
Securing Hosts and Services
TCP/IP Protocols
VPN Design and Auditing
VPN Implementation

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, networking and security experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students