TN-905: Cyber Threat Intelligence Analysis

 

Course Overview:

TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI.  This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams.  Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI.   As with many advanced TechNow security courses, there is a large hands-on ratio.  This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries.  CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. .  MDT puts us close the mission and helps define the internal context to be analyzed against the CTI.  TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Learn to comprehend and develop complex scenarios
  • Identify and create intelligence requirements through practices such as threat modeling
  • Utilize threat modeling to drive intelligence handling and practices 
  • Breakdown tactical, operational, and strategic-level threat intelligence
  • Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
  • How to collect adversary information creating better value CTI
  • How to filter and qualify external sources, mitigating low integrity intelligence
  • Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
  • Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
  • Breaking down threats mapped against their tradecraft to tweak IOCs
  • Establish structured analytical techniques to be successful in any security role
  • Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Course Prerequisites:

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

TN-963: Windows Security Automation with PowerShell

Course Overview:

PowerShell is made for Security Operations (SecOps) automation on Windows. SecOps requires automation in order to scale out security changes and monitoring beyond a handful of hosts. For example, when a vulnerability must be remediated but there is no patch for it yet, automation is needed to quickly and consistently enact the changes necessary. PowerShell “remoting” is encrypted remote command execution of PowerShell scripts in a way that can scale to thousands of endpoints and servers.

Imagine being able to hunt for indicators of compromise across thousands of machines with just a few lines of PowerShell code. Or imagine having the local Administrator account password reset every night on thousands of endpoints in a secure way, and being able to retrieve that password securely too.

We will show you to do these tasks and more. Transcription logging for forensics, strong encryption code signing, application whitelisting of scripts, IPSec port control, and Just Enough Admin (JEA).

As more and more of our systems are moved up to the cloud, PowerShell will become even more important. Amazon Web Services, Microsoft Azure, Office 365, Hyper-V and VMware already support PowerShell administration for many tasks.

Attendees to TN-963: Windows Security Automation with PowerShell will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 3 days

Course Objectives:

Day One
PowerShell Overview and Tips

    • Getting started running commands
    • Using and updating the built-in help
    • Execution policies
    • Fun tricks with the ISE graphical editor
    • Piping .NET and COM objects, not text
    • Using properties and methods of objects
    • Helping Linux admins feel more at home
    • Aliases, cmdlets, functions, modules, etc.
    • Customizing your profile script

What Can We Do With PowerShell

    • PowerShell remote command execution
    • Fan-out remoting and security
    • File copy via PowerShell remoting
    • Capturing the output of commands
    • Parsing text files and logs with regex patterns
    • Searching remote event logs faster with XPath
    • Mounting the registry as a drive
    • Exporting data to CSV, HTML and JSON files
    • Parsing and mining nmap port scanner XML output
    • Running scripts as scheduled jobs
    • Pushing out scripts through Group Policy
    • Importing modules and dot-sourcing functions
    • http://www.PowerShellGallery.com

Write your own scripts

    • Writing your own functions
    • Passing arguments into your scripts
    • Function parameters and returning output
    • Flow control: if-then, do-while, foreach, switch
    • The .NET Framework class library: a playground
    • How to pipe data in/out of your scripts

Day Two
Continuous Secure Configuration Enforcement

    • How to use Group Policy and PowerShell together
    • Automate with INF security templates
    • How to customize INF templates
    • Microsoft Security Compliance Manager (SCM)
    • SECEDIT.EXE scripting
    • Building an in-house security repository for SecOps/DevOps
    • NSA’s Secure Host Baseline GPOs

Group Policy Precision Targeting

    • Managing Group Policy Objects (GPOs) with PowerShell
    • LSDOU, Block Inheritance, Enforced GPOs
    • Group Policy permissions for targeting changes
    • ADMX templates for mass registry editing
    • Deploying PowerShell startup and logon scripts
    • WMI item-level targeting of GPO preferences
    • GPO scheduled tasks to run PowerShell scripts
    • Remote command execution via GPO (not remoting)
    • Empowering the Hunt Team to fight back!

Server Hardening for SecOps/DevOps

    • Server Manager scripting with PowerShell
    • Adding and removing roles and feature
    • Remotely inventory roles, features, and apps
    • Why Server Nano or Server Core
    • Running PowerShell automatically after service failure
    • Service account identities, passwords, and risks
    • Tools to reset service account passwords securely

Day Three
PowerShell Desired State Configuration (DSC)

    • DSC is Configuration Management built in for free
    • Using DSC for continuous reinforcement of settings
    • Writing your own DSC configuration scripts
    • Free DSC resource modules: www.PowerShellGallery.com
    • How to push DSC configurations to many targets
    • DSC background job processing in push mode
    • Examples: sync files, install roles, manage groups
    • Auditing a remote target against a DSC MOF template
    • “ApplyAndAutoCorrect” mode for continuous enforcement

PowerShell Just Enough Admin (JEA)

    • JEA is Windows sudo, like on Linux
    • JEA is Windows setuid root, like on Linux
    • Restricting commands and arguments
    • Verbose transcription logging
    • How to set up and configure JEA
    • Privilege Access Workstations (PAWs)

PowerShell and WMI

    • Windows Management Instrumentation (WMI) service
    • What is WMI and why do hackers abuse it so much?
    • Using PowerShell to query WMI CIM classes
    • WMI authentication and traffic encryption
    • Inventory operating system versions and installed software
    • WMI remote command execution versus PowerShell remoting
    • PowerShell security best practices
    • PowerShell transcription logging to catch hackers

Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class?  Then let everyone know!

N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology,  from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT).  Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting.  This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
  • Configure the Firepower Management Center (FMC)
  • Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
  • Describe the Cisco Firepower Systems infrastructure
  • Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
  • Describe the System Configuration and Health policies and implement them
  • Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
  • Describe, create, and implement objects for use in Access Control policies
  • Create DNS and URL policies and configure Sinkholes
  • Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
  • Describe advanced policy configuration and Firepower system configuration options
  • Configure Malware Policies to find and stop Malware
  • Understand Security Intelligence, and how to configure SI to stop attacks NOW!
  • Configure policies to find and stop Ransomware
  • Understand how to fine tune IPS policies
  • Understand how to find tun Snort Preprocessor policies (NAP)
  • Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
  • Analyze events
  • Create reporting templates and schedule them
  • Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
  • Set up external authentication for users using LDAP/Realms
  • Configuring system integration, realms, and identity sources
  • Configure FMC domains and implement them
  • Configure FTD HA with two FTD devices
  • SSL Policy – decrypt your traffic
  • AnyConnect and Site-to-Site VPN
  • Understand network and host based AMP.  Configure and analyze host based AMP
  • Understand Cisco Identity Services Engine (ISE)
  • Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-835: Certified in Risk and Information Systems Control (CRISC) Preparation Seminar

Course Overview:

Certified in Risk and Information Systems Control (CRISC), is for professionals responsible for an organization's risk management program.  Students looking to acquire CRISC qualify themselves as IT security analyst, security engineer architect, information assurance program manager and senior IT auditor.  CRISC certified professionals manage risk, design and oversee response measures, monitor systems for risk, and ensure the organization's risk management strategies are met.

The CRISC exam will primarily align with the terminology and concepts described in The Risk IT Framework, The Risk IT Practioner Guide, and COBIT 5.  This will include applications in the evaluation and monitoring of IT-based risk, as well as the design and implementation of IS controls. 

The CRISC exam covers four domains that are periodically updated to reflect the changing needs of the profession:

  • Domain 1: Risk Identification 
  • Domain 2: Risk Assessment
  • Domain 3: Risk Response and Mitigation
  • Domain 4: Risk and Control Monitoring and Reporting

This course is designed to assist in your exam preparation for the CRISC exam.

Attendees to TN-835: Certified in Risk and Information Systems Control (CRISC) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Risk IT Framework—Purpose and Principles
  • Essentials of Risk Governance, Evaluation, and Response
  • Risk and Opportunity Management Using CobiT, Val IT and Risk IT
  • The Risk IT Framework Process Model Overview
  • Managing Risk in Practice—The Practitioner Guide Overview
  • Overview of the Risk IT Framework Process Model 
  • The Risk IT Framework

Prerequisites:

A minimum of at least three (3) years of cumulative work experience performing the tasks of a CRISC professional across at least three (3) CRISC domains is required for certification. There are no substitutions or experience waivers.

Comments

Latest comments from students

User: tracycampbell

Instructor comments: Dave had great command of the class and the flow of information. The lessons seem relevant to the exam and the course material should assist greatly with passing. As a bonus, his breakdown of PKI helped with my current job requirements.

Facilities comments: The Home2Suites by Hilton was FANTASTIC!

Liked the class?  Then let everyone know!

CT-215: Cloud+

 

Course Overview:

This course covers the knowledge and skills required to understand standard Cloud terminologies/methodologies, to implement, maintain, and deliver cloud technologies and infrastructures (e.g. server, network, storage, and virtualization technologies), and to understand aspects of IT security and use of industry best practices related to cloud implementations and the application of virtualization.

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

TechNow is a CompTIA partner and uses official CompTIA Cloud+ curriculum.

Attendees to CT-215: Cloud+ will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time Event
12/09/2024 - 12/13/2024
08:00 -16:00 		CT-215: Cloud+
TechNow, Inc, San Antonio TX

Course Duration: 5 days

Course Objectives:

  • Prepare to deploy cloud solutions
  • Deploy a pilot project
  • Test a pilot project deployment
  • Design a secure network for cloud deployment
  • Determine CPU and memory sizing for cloud deployments
  • Plan Identity and Access Management for cloud deployments
  • Analyze workload characteristics to ensure successful migration to the cloud
  • Secure systems to meet access requirements
  • Maintain cloud systems
  • Implement backup, restore, and business continuity measures
  • Analyze cloud systems for required performance
  • Analyze cloud systems for anomalies and growth forecasting
  • Troubleshoot deployment, capacity, automation, and orchestration issues
  • Troubleshoot connectivity issues
  • Troubleshoot security issues

Course Prerequisites:

  • Security+, Network+, CASP or equivalent experience
  • Managing or administering at least one of UNIX, Windows, Databases, networking, or security

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!