PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-565: Nessus Vulnerability & Compliance Auditing

Course Overview:

This course provides security professionals with the skills and knowledge to perform vulnerability and compliance scanning of supported operating systems, devices, and applications. Students will construct custom scan policies for topology discovery, network vulnerability detection, credentialed patch audits, and compliance benchmarks, and discuss the underlying technologies utilized by the Nessus scanner.

This course provides students with the necessary information to prepare for the Tenable Certified Nessus Auditor (TCNA) exam.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Introduction to Nessus and Vulnerability Scanning
  • Nessus Installation and Administration
  • Basic Nessus Scan Operation
  • Nessus Scan Configuration and Policy Creation
  • Vulnerability Analysis and Reporting with Nessus
  • Advanced Scan Configuration and Policy Creation
  • Introduction to Compliance and Auditing
  • Nessus Auditing Features
  • Windows System Auditing
  • Unix System Auditing
  • Cisco IOS Auditing
  • Nessus Database Auditing
  • Nessus Content Auditing
  • Auditing to Industry Guidelines
  • Auditing to Federal Guidelines

Prerequisites:

Students should possess a basic understanding of TCP/IP networking, operating systems security, and common client/server applications.

Comments

Latest comments from students

Liked the class?  Then let everyone know!

PM-325: Project Management Professional (PMP) Exam Preparation

Course Overview:

This course is developed for those individuals seeking to pass the Project Management Institute’s PMP certification exam, as well as any individual who has attended any Project Management Certification program in the past and needs to brush up on the material needed to pass the PMP exam.

Attendees to PM-325: Project Management Professional (PMP) Exam Preparation will receive official PMI (Project Management Institute) course materials and expert instruction from an official PMI Instructor.

TechNow Inc. is an official Authorized Training Partner of The Project Management Institute (PMI).

 

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Project Initiation
  • Examining the Project Management Framework
  • Examining the Project Management Processes
  • Implementing Project Integration Management
  • Managing the Project Scope
  • Introducing Project Time Management
  • Introducing Project Cost Management
  • Introducing Project Quality Management
  • Introducing Project Human Resource Management
  • Introducing Project Communications Management
  • Introducing Project Risk Management
  • Introducing Project Procurement Management
  • PMP Code of Professional Conduct

Prerequisites:

A Bachelor’s degree & 4,500 hours of project management experience over 3 years/36 months.

OR

7,500 hours of project management experience over 5 years/60 months (if NO degree).

AND

Complete & submit the PMP certification application directly to PMI

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-909: Windows Forensic Analysis

 

Course Overview:

Windows Forensic Analysis is a hands-on course that covers digital forensics of the Microsoft Windows operating system.  The collection and analysis of data tracking user based activity that can be used for internal purposes or legal litigation.  TechNow has the student analyze many data images for various Windows operating systems, as current as Windows 8.1, Windows 10  in an environment that uses many Cloud technologies such as  Office365, Skydrive, Sharepoint, Exchange Online, and Windows Phone.

This is not death by power point. The course is aligned with digital forensic investigators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Windows Forensic Analysis.

Attendees to TN-909: Windows Forensic Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Windows Operating System Components
  • Core Forensic Principles
  • Live Response and Triage-Based Acquisition Techniques
  • Windows Image Mounting and Examination
  • Memory, Pagefile, Filesystems
  • Data and Metadata
  • Profiling systems and users
  • Tracking USB and BYOD
  • Log and Registry Analysis
  • User Communications
  • Email Forensics
  • Browser Forensics
  • Reporting and  Presentation

Course Prerequisites:

  • Windows and Security Experience

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

 

 

PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231)

  

 

Course Overview:  PA-242: Palo Alto Networks Firewall Manage Cyberthreats (EDU-231) Training Class is a two-day course that teaches students strategies in defense against cyberthreats.  Successful completion of this course enables administrators to better understand the threat landscape.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-242: Palo Alto Networks Firewall Manaage Cyberthreats  (EDU-231) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this training course will gain an understanding of cyberthreats and their characteristics.  Students will learn how to manage cyberthreats using security policies, profiles, and signatures to protect their network against emerging threats.

Day 1

  • Mod 1: Threat Landscape
    • Advanced Persistent
    • Threats
    • Data Breaches and Tactics
    • Threat Management
    • Strategies
  • Mod 2: Integrated
    • Approach to Threat
    • Protection
    • Integrated Approach to
    • Protection
    • Next-Generation Firewall
    • Advanced Endpoint
    • Protection
  • Mod 3: Network Visibility
    • Zero Trust Model
    • SSL Decryption
    • Decryption Policy
  • Mod 4: Reducing the Attack
    • Surf
    • ection

 

Day 2

  • Mod 5: Handling Known
    • Threats
    • WildFire Analysis
    • Security Profiles
  • Mod 6: Handling Unknown
    • Traffic and Zero-Day Exploits
    • WildFire
    • Researching Threat Events
    • Identifying Unknown
    • Applications
  • Mod 7: Investigating
    • Breaches
    • Identify IOCs Using
    • App-Scope
    • Log Correlation
    • Finding Infected Host
  • Mod 8: Using Custom
    • Signatures
    • Creating Custom App-IDs
    • Threat Signatures

A

Prerequisites:

  • Students must complete the PA-213: Install, Configure, and Manage course
  • Understanding of network concepts, including routing, switching, and IP addressing
  • In-depth knowledge of port-based security and security technologies such as IPS, proxy, and content filtering

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!