PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture. Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC). The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Active Directory and BloodHound
Security Controls
PKI
Encryption
Wireless & Network Security and Hardening DNS
802.1x and Endpoint Protection
Firewalls and VPN
PowerShell Scripting
JEA, DSC, Enterprise Security with PowerShell
Windows Attack Strategies

Prerequisites:

Security+
Windows System Administration Skills

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class? Then let everyone know!

TN-385: TCP/IP Analysis & Implementation

Course Overview:

This course, TN-385: TCP/IP Analysis & Implementation, provides students with a comprehensive technical introduction to TCP/IP & the interworkings of TCP/IP application to UNIX, Linux and Windows in a network environment. This course begins by providing a comprehensive protocol stack analysis. It continues with extensive hands-on exercises needed to configure TCP/IP on UNIX and Windows based networks.

Attendees to TN-385: TCP/IP Analysis & Implementation will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

A thorough comprehension of each level of the protocol stack
Configuring UNIX & Windows to access internetworks
Configuring & setting up a Cisco router
Properly implementing subnets to avoid ongoing maintenance headaches
Routing & routing protocols, RIP, OSPF, and IGRP
How to troubleshoot a wide range of routing problems
All major TCP/IP application services including: FTP, TELNET, SNMP, NFS, DNS, DHCP, & WINS
How to avoid common internetworking problems
How to troubleshoot TCP/IP networks using protocol analysis techniques – snoop on Sun Workstation & Network Monitor on Windows.
How to design, build, configure, & manage TCP/IP internetworks
Applying a structured methodology for troubleshooting TCP/IP internetworks
ACL's on Cisco routers

Prerequisites:

Students should have good end-user skills in TCP/IP (FTP, TELNET, RLOGON, & MAIL).

Comments

Latest comments from students

Liked the class? Then let everyone know!

VM-335: VMware Cloud Essentials and vCloud – Architecting the VMware Cloud FastTrack

Course Overview:

This FastTrack course combines combines two VMware courses (VMware Cloud Essentials and vCloud Architecting the VMware Cloud) into a single week course that adds extra exercises and labs to exemplify the techniques presented. The course begins with how to adopt, operate, and govern the cloud. The course enables participants to successfully complete the associated CompTIA Cloud Essentials™ Exam to become a Cloud Essentials™ Professional(CEP). This course also covers the subject matter specified by the VCP-Cloud certification.

This course is designed to guide students through the decision points and policy choices available for designing and implementing a VMware vCloud environment. Detailed labs and exercises for VMware vSphere™, VMware vCloud Director, VMware vCenter™ Chargeback, and the VMware® vShield Edge capability that is included with vCloud Director. A comprehensive VMware cloud design is demonstrated and discussed.

Attendees to VM-335: VMware Cloud Essentials and vCloud – Architecting the VMware Cloud FastTrack will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Understand the common terms and definitions of cloud computing.
Understand the business benefits and business considerations of cloud computing.
Understand cloud computing from a technical perspective and recognize the various techniques, methods, challenges, and types of clouds.
Understand the impact and changes of cloud computing on IT service management.
Explain typical steps that lead to the successful adoption of cloud computing and understand the implications for organizations.
Recognize the compliance, risk, and regulatory consequences of cloud computing and its financial and strategic impact on an organization.
Evaluate and design a multitenant environment to address both private cloud and public cloud customer needs.
Configure vCloud providers that can accommodate heterogeneous server, storage, and network resources
Design a network infrastructure optimized for vCloud.
Integrate vCloud Director security with existing LDAP systems and design appropriate security hierarchies with security rolesnderstand the common terms and definitions of cloud computing.
Understand the business benefits and business considerations of cloud computing.
Understand cloud computing from a technical perspective and recognize the various techniques, methods, challenges, and types of clouds.
Understand the impact and changes of cloud computing on IT service management.
Explain typical steps that lead to the successful adoption of cloud computing and understand the implications for organizations.
Recognize the compliance, risk, and regulatory consequences of cloud computing and its financial and strategic impact on an organization.
Evaluate and design a multitenant environment to address both private cloud and public cloud customer needs.
Configure vCloud providers that can accommodate heterogeneous server, storage, and network resources.
Design a network infrastructure optimized for vCloud.
Integrate vCloud Director security with existing LDAP systems and design appropriate security hierarchies with security roles.
Design a vCenter Chargeback implementation.

Course Prerequisites:

VM-315 or equivalent experience.
Managing or administering at least one of UNIX, Windows, databases, networking, or security.

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-335: Advanced Penetration Testing Using Open Source Tools

Course Overview:

This is an advanced course that assumes the attendee is a qualified security professional with experience using security tools and understands the concepts behind penetration testing. Courses that build up the expertise that enables a student to succeed in this course is Security+, CEH, CISSP, and any of the GIAC certifications. This course is completely hands-on and utilizes the BackTrack tool suite from backtrack-linux.org. The course covers, in detail, various attacks and tools that are contained in the BackTrack tool suite.

Attendees to TN-335: Advanced Penetration Testing Using Open Source Tools will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Information Security and Open Source Software
Operating System Tools
Firewalls
Scanners
Vulnerability Scanners
Network Sniffers
Intrusion Detection Systems
Analysis and Management Tools
Encryption Tools
Wireless Tools
Forensic Tools
More on Open Source Software