N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

TN-555: Certified Ethical Hacker v12 (CEH)

Course Overview:

This CEH course will immerse you into a “Hacker Mindset” in order to teach you how to think like a hacker and better defend against future attacks. Students are in the driver’s seat with a hands-on training environment employing a systematic ethical hacking process. All while teaching students how to scan, test, hack, and secure target systems. CEH shows how hackers think and act maliciously so you can learn to better position your organization’s security infrastructure and defend against future attacks.

This CEH course covers the Five Phases of Ethical Hacking, diving into Reconnaissance, Gaining Access, Enumeration, Maintaining Access, and covering your tracks.

This CEH course delivers in-demand ethical hacking skills while preparing you for the internationally-recognized Certified Ethical Hacker (CEH) certification exam (312-50) from EC-Council.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

What’s Included:

EC-Council official E-Courseware
EC-Council official iLabs code with access for 6 months
EC-Council official Certificate of Attendance
CEH Exam Voucher

Security Course Flow

Dates/Locations:

Date/Time	Event
12/02/2024 - 12/06/2024 08:00 -16:00	TN-555: Certified Ethical Hacker v12 (CEH) TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Content:

Module 01. Introduction to Ethical Hacking
Module 02. Foot-printing and Reconnaissance
Module 03. Scanning Networks
Module 04. Enumeration
Module 05. Vulnerable Analysis
Module 06. System Hacking
Module 07. Malware Threats
Module 08. Sniffing
Module 09. Social Engineering
Module 10. Denial-of-Service
Module 11. Session Hijacking
Module 12. Evading IDS,Firewalls, and Honeypots
Module 13. Hacking Web Servers
Module 14. Hacking Web Applications
Module 15. SQL Injection
Module 16. Hacking Wireless Networks
Module 17. Hacking Mobile Platforms
Module 18. IoT and OT Hacking
Module 19. Cloud Computing
Module 20. Cryptography

Prerequisites:

Windows operating system and/or Linux operating system or other Unix-based OS
TCP/IP protocols and implementation
At least 2 years of IT security experience
TN-325:Security+

Target Audience:

Information Security Analyst/Administrator, Information Assurance (IA) Security Officer, Information Security Manager/Specialist, Auditors, Security Professional, Site Admins, Penetration Testers, Red Team,Risk/Threat/Vulnerability Analyst, Individuals concerned about the integrity of network infrastructure

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students

Liked the class? Then let everyone know!

cheddarcon-powershell-threat-hunting-registration

Windows Security Automation and Threat Hunting with PowerShell Seminar

Location: 400 W Wisconsin Ave, Milwaukee, WI 53203, USA

Date: October 10, 2018 8:00am – 4:00pm

Duration: 8 hours

Audience: Cyber Security professionals and Windows administrators

Attendees Environment: Laptops not required, but suggested to have better hands-on absorption of subject matter.

Description:
PowerShell is both a command-line shell and scripting language. Fight fires quickly using existing or custom PowerShell commands or scripts at the shell. PowerShell is made for Security Operations (SecOps) automation on Windows. This seminar does not require prior programming skills. The seminar focuses on PowerShell programming, giving a beginner skills to be productive in windows scripting to automate tasks and also remediate problems.

Cyber Security is the objective of this seminar, and the PowerShell examples will demonstrate PowerShell capabilities that help lock down a Windows system and also report security status.

Objectives:

PowerShell Overview

Getting started running commands
Security cmdlets
Using and updating the built-in help
Execution policies
Fun tricks with the ISE graphical editor
Piping .NET and COM objects, not text
Using properties and methods of objects
Helping Linux admins feel more at home
Aliases, cmdlets, functions, modules, etc.

PowerShell Utilities and Tips

Customizing your profile script
PowerShell remote command execution
Security setting across the network
File copy via PowerShell remoting
Capturing the output of commands
Parsing text files and logs with regex patterns
Parsing Security Logs
Searching remote event logs
Mounting the registry as a drive
Security settings in the Registry
Exporting data to CSV, HTML and JSON files
Running scripts as scheduled jobs
Continued Security Compliance
Pushing out scripts through Group Policy
Importing modules and dot-sourcing functions
http://www.PowerShellGallery.com

PowerShell Scripting

PowerShell Scripting to implement Security Practices
Writing your own functions to automate security status and settings
Passing arguments into your scripts
Function parameters and returning output
Flow control: if-then, foreach, that make security decisions
How to pipe data in/out of your scripts for security compliance and reporting

Attendees to this seminar, Windows Security Automation and Threat Hunting with PowerShell, will receive TechNow approved course materials and expert instruction.[/wr_text][/wr_column][/wr_row]

TN-965 Windows Security Automation with Powershell

Course Overview:

PowerShell is made for Security Operations (SecOps) automation on Windows. SecOps requires automation in order to scale out security changes and monitoring beyond a handful of hosts. For example, when a vulnerability must be remediated but there is no patch for it yet, automation is needed to quickly and consistently enact the changes necessary. PowerShell “remoting” is encrypted remote command execution of PowerShell scripts in a way that can scale to thousands of endpoints and servers.

Imagine being able to hunt for indicators of compromise across thousands of machines with just a few lines of PowerShell code. Or imagine having the local Administrator account password reset every night on thousands of endpoints in a secure way, and being able to retrieve that password securely too.

We will show you to do these tasks and more. Transcription logging for forensics, strong encryption code signing, application whitelisting of scripts, IPSec port control, and Just Enough Admin (JEA).

As more and more of our systems are moved up to the cloud, PowerShell will become even more important. Amazon Web Services, Microsoft Azure, Office 365, Hyper-V and VMware already support PowerShell administration for many tasks.

Attendees to TN-965: Windows Security Automation with PowerShell will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Intended Audience
This course is intended for IT Professionals already experienced in general Windows Server and Windows Client administration or already experienced in administering and supporting Application servers and services including applications like Exchange, SharePoint, and SQL. It is broadly intended for students who want to use Windows PowerShell to automate administrative tasks from the command line, using any Microsoft or independent software vendor (ISV) product that supports Windows PowerShell manageability.

Course Objectives:

PowerShell Overview and Tips

- Getting started running commands
- Using and updating the built-in help
- Execution policies
- Fun tricks with the ISE graphical editor
- Piping .NET and COM objects, not text
- Using properties and methods of objects
- Helping Linux admins feel more at home
- Aliases, cmdlets, functions, modules, etc.
- Customizing your profile script

What Can We Do With PowerShell

- PowerShell remote command execution
- Fan-out remoting and security
- File copy via PowerShell remoting
- Capturing the output of commands
- Parsing text files and logs with regex patterns
- Searching remote event logs faster with XPath
- Mounting the registry as a drive
- Exporting data to CSV, HTML and JSON files
- Parsing and mining nmap port scanner XML output
- Running scripts as scheduled jobs
- Pushing out scripts through Group Policy
- Importing modules and dot-sourcing functions
- http://www.PowerShellGallery.com

Write your own scripts

- Writing your own functions
- Passing arguments into your scripts
- Function parameters and returning output
- Flow control: if-then, do-while, foreach, switch
- The .NET Framework class library: a playground
- How to pipe data in/out of your scripts

Continuous Secure Configuration Enforcement

- How to use Group Policy and PowerShell together
- Automate with INF security templates
- How to customize INF templates
- Microsoft Security Compliance Manager (SCM)
- SECEDIT.EXE scripting
- Building an in-house security repository for SecOps/DevOps
- NSA’s Secure Host Baseline GPOs

Group Policy Precision Targeting

- Managing Group Policy Objects (GPOs) with PowerShell
- LSDOU, Block Inheritance, Enforced GPOs
- Group Policy permissions for targeting changes
- ADMX templates for mass registry editing
- Deploying PowerShell startup and logon scripts
- WMI item-level targeting of GPO preferences
- GPO scheduled tasks to run PowerShell scripts
- Remote command execution via GPO (not remoting)
- Empowering the Hunt Team to fight back!

Server Hardening for SecOps/DevOps

- Server Manager scripting with PowerShell
- Adding and removing roles and feature
- Remotely inventory roles, features, and apps
- Why Server Nano or Server Core
- Running PowerShell automatically after service failure
- Service account identities, passwords, and risks
- Tools to reset service account passwords securely

PowerShell Desired State Configuration (DSC)

- DSC is Configuration Management built in for free
- Using DSC for continuous reinforcement of settings
- Writing your own DSC configuration scripts
- Free DSC resource modules: www.PowerShellGallery.com
- How to push DSC configurations to many targets
- DSC background job processing in push mode
- Examples: sync files, install roles, manage groups
- Auditing a remote target against a DSC MOF template
- “ApplyAndAutoCorrect” mode for continuous enforcement

PowerShell Just Enough Admin (JEA)

- JEA is Windows sudo, like on Linux
- JEA is Windows setuid root, like on Linux
- Restricting commands and arguments
- Verbose transcription logging
- How to set up and configure JEA
- Privilege Access Workstations (PAWs)

PowerShell and WMI

- Windows Management Instrumentation (WMI) service
- What is WMI and why do hackers abuse it so much?
- Using PowerShell to query WMI CIM classes
- WMI authentication and traffic encryption
- Inventory operating system versions and installed software
- WMI remote command execution versus PowerShell remoting
- PowerShell security best practices
- PowerShell transcription logging to catch hackers

Prerequisites:

Previous Windows Server and Windows Client management knowledge and hands on experience.
Experience installing and configuring Windows Server into existing enterprise environments, or as standalone installations.
Knowledge and experience of network adapter configuration, basic Active Directory user administration, and basic disk configuration.
Knowledge and hands on experience specifically with Windows Server 2012/Windows Server 2012 R2 and Windows 8/Windows 8.1 would be of benefit but is not essential.

Comments

Latest comments from students

First Name*
Last Name*
Your Email*
Your Organization*
Phone*