PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-822: Certified Information Systems Auditor (CISA) Seminar

Course Overview:

The mark of excellence for a professional certification program is the value and recognition it bestows on the individual who achieves it.  The technical skills & practices the CISA promotes and evaluates are the building blocks of success in the field. Possessing the CISA designation demonstrates proficiency and is the basis for measurement in the profession.  With a growing demand for professionals possessing IS audit, control and security skills, CISA has become a preferred certification program by individuals and organizations around the world.  CISA certification signifies commitment to serving an organization and the IS audit, control and security industry with distinction.  This course will help the student prepare to obtain this credential.

Attendees to TN-822: Certified Information Systmes Auditor (CISA) Seminar will receive TechNow approved course materials and expert instruction.

Document Flow Chart iconsm

Dates/Locations:

Date/Time Event
12/09/2024 - 12/13/2024
08:00 -16:00 		TN-822: Certified Information Systems Auditor (CISA) Seminar
TechNow, Inc, San Antonio TX
01/06/2025 - 01/10/2025
08:00 -16:00 		TN-822: Certified Information Systems Auditor (CISA) Seminar
TechNow, Inc, San Antonio TX
02/10/2025 - 02/14/2025
08:00 -16:00 		TN-822: Certified Information Systems Auditor (CISA) Seminar
TechNow, Inc, San Antonio TX
05/05/2025 - 05/09/2025
08:00 -16:00 		TN-822: Certified Information Systems Auditor (CISA) Seminar
TechNow, Inc, San Antonio TX
10/06/2025 - 10/10/2025
08:00 -16:00 		TN-822: Certified Information Systems Auditor (CISA) Seminar
TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

  • The IS Audit Process (10%)
    • Provide IS audit services in accordance with IS audit standards, guidelines, and best practices to assist the organization in ensuring that its information technology and business systems are protected & controlled.
  • IT Governance (15%)
    • Provide assurance that the organization has the structure, policies, accountability, mechanisms and monitoring practices in place to achieve the requirements of corporate governance of IT.
  • System and Infrastructure Life Cycle Management (16%)
    • Provide assurance that the management practices for the development/acquisition, testing, implementation, maintenance and disposal of systems and infrastructure will meet the organization's objectives.
  • IT Service Delivery and Support (14%)
    • Provide assurance that the IT service management practices will ensure the delivery of the level of services required to meet the organization's objectives.
  • Protection of Information Assets (31%)
    • Provide assurance that the security architecture (policies, standards, procedures and controls) ensures the confidentiality, integrity and availability of information assets.
  • Business Continuity and Disaster Recovery (14%)
    • Provide assurance that, in the event of a disruption, the business continuity and disaster recovery processes will ensure the timely resumption of IT services, while minimizing the business impact.

Prerequisites:

A minimum of five years of professional information systems auditing, control & security work experienced is required.  Experience must have been gained within the 10-year period preceding the application date for certification, or within five years from the date of initially passing the examination.

Comments

Latest comments from students

User: fsarisen

Instructor comments: Thank you Tim for all the great information! I am confident that I'll do well on the ICND exam.

User: storoy30

Instructor comments: The instructor, Tim Burkard, was very knowledgeable on the course material and skilled at explain more complex ideas.

Liked the class?  Then let everyone Know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.  This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations.  PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC).  The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Active Directory and BloodHound
  • Security Controls
  • PKI
  • Encryption
  • Wireless & Network Security and Hardening DNS
  • 802.1x and Endpoint Protection
  • Firewalls and VPN
  • PowerShell Scripting
  • JEA, DSC, Enterprise Security with PowerShell
  • Windows Attack Strategies

Prerequisites:

  • Security+
  • Windows System Administration Skills

 

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class?  Then let everyone know!

TN-949: Certified Firewall Analyst Course

Course Overview:

This is a hands-on course that covers many of the concepts of securing the perimeter of an organization. This includes concepts such as intrusion detection, packet filtering, and central logging.

A skills focus enables the student to better absorb the subject matter and perform better on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Firewalls.

This course is an excellent precursor to PA-215 Palo Alto Firewall Essentials FastTrack.

Attendees to TN-949: Certified Firewall Analyst Prep will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Analyzing Network and Wireless Design
  • Creating and Auditing a Rulebase
  • Firewall Assessment and Penetration Testing
  • Host-Based Detection and DLP
  • Incident Detection and Analysis
  • IOS and Router Security
  • IPv6 and ICMPv6
  • Log Collection and Analysis
  • NAT and Proxies
  • Netfilter IPtables
  • Network Access Control
  • Network-Based Intrusion Detection
  • Packet Filters and Inspection
  • Packet Fragmentation
  • Perimeter Concepts and IP Fundamentals
  • Securing Hosts and Services
  • TCP/IP Protocols
  • VPN Design and Auditing
  • VPN Implementation

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking and security  experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class?  Then let everyone know!