N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
02/10/2025 - 02/14/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

CL-315: CCSP – Certified Cloud Security Professional Preparation Seminar

Course Overview:

TechNow’s CCSP Certification Preparation Seminar is an accelerated course designed to meet the high demands of the information security industry by preparing students for the industry standard Certified Cloud Security Professional exam. The exam covers (ISC)²’s 6 Domains from the Common Body of Knowledge, which encompass the whole of cloud security.

This course is an intense 5 day program. TechNow has a proven training and certification track record that you can depend on. CCSP test is 125 questions that typically require more comprehension than CISSP questions. The instructor takes time to walk through scenarios that assume comprehensive knowledge of enterprise infrastructures.

Attendees to CL-315: CCSP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction.

The 6 domains of the CCSP CBK:

Architectural Concepts & Design Requirements
Cloud Data Security
Cloud Platform & Infrastructure Security
Cloud Application Security
Operations
Legal & Compliance

Duration: 5 days

Audience: Mid-level to advanced professionals involved with IT architecture, web and cloud security engineering, information security, governance, risk and compliance, and even IT auditing. CCSPs will be responsible for cloud security architecture, design, operations, and/or service orchestration.

DoD 8140: Not Mandated

Course Prerequisites: IT professional with 5 years of experience, 3 years of security experience, and at least 1 year of cloud security experience. GSEC, CISSP, CASP or equivalent experience in managing enterprise infrastructures. CCSP test is 125 questions that typically require more comprehension than CISSP questions. This course is for those who are already qualified at the enterprise level for IT infrastructures, have Cloud experience, and are looking for a Cloud Security certification.

Course Objectives:

Domain 1: Architectural Concepts and Design Requirements

Module 1: Understand cloud computing concepts
Module 2: Describe cloud reference architecture
Module 3: Understand security concepts relevant to cloud computing
Module 4: Understand design principles of secure cloud computing
Module 5: Identify trusted cloud services

Domain 2: Cloud Data Security

Module 1: Understand Cloud Data Life Cycle
Module 2: Design and Implement Cloud Data Storage Architectures
Module 3: Understand and implement Data Discovery and Classification Technologies
Module 4: Design and Implement Relevant Jurisdictional Data Protection for Personally Identifiable Information (PII)
Module 5: Design and implement Data Rights Management
Module 6: Plan and Implement Data Retention, Deletion, and Archival policies
Module 7: Design and Implement Auditability, Traceability, and Accountability of Data Events

Domain 3: Cloud Platform Infrastructure Security

Module 1: Comprehend Cloud Infrastructure Comp
Module 2: Analyze Risks Associated to Cloud Infrastructure
Module 3: Design and Plan Security Controls
Module 4: Plans Disaster Recovery & Business Continuity Management

Domain 4: Cloud Application Security

Module 1: Recognize Need for Training and Awareness in Application Security
Module 2: Understand Cloud Software Assurance and Validation
Module 3: Use Verified Secure Software
Module 4: Comprehend the Software Development Life Cycle (SDLC) Process
Module 5: Apply the Secure Software Development Life Cycle
Module 6: Comprehend the Specifics of Cloud Application Architecture
Module 7: Design Appropriate Identity and Access Management (IAM) Solutions

Domain 5: Operations

Module 1: Support the Planning Process for the Data Center Design
Module 2: Implement and Build Physical Infrastructure for Cloud Environment
Module 3: Run Physical Infrastructure for Cloud Environment
Module 4: Manage Physical Infrastructure for Cloud Environment
Module 5: Build Logical Infrastructure for Cloud Environment
Module 6: Run Logical Infrastructure for Cloud Environment
Module 7: Manage Logical Infrastructure for Cloud Environment
Module 8: Ensure Compliance with Regulations and Controls
Module 9: Conduct Risk Assessment to Logical and Physical Infrastructure
Module 10: Understand the Collection and Preservation of Digital Evidence
Module 11: Manage Communications with Relevant Parties

Domain 6: Legal and Compliance

Module 1: Understand Legal Requirements and Unique Risks Within the Cloud Environment
Module 2: Understand Privacy Issues, Including Jurisdictional Variances
Module 3: Understand Audit Process, Methodologies, and Required Adaptions for a Cloud Environment
Module 4: Understand Implication of Cloud to Enterprise Risk Management
Module 5: Understand Outsourcing and Cloud Contract Design
Module 6: Execute Vendor Management

Dates/Locations: No Events

TN-8150: CISSP Certification Preparation Seminar

Course Overview:

TechNow's CISSP Certification Preparation Seminar is an accelerated course designed to meet the high demands of the information security industry by preparing students for the industry standard Certified Information Systems Security Professional exam. The exam covers (ISC)²'s 8 Domains from the Common Body of Knowledge, which encompass the whole of information security.

This course is an intense 10 day program that ensures the student passes the CISSP exam on the first try. We encourage our students to take the exam within a week after course completion. The goal for this course is a pass rate of one and done. Our high pass rate reflects the dedication of TechNow's students and our commitment to a ten day program that many in the industry do in 5 days. TechNow has a proven CISSP track record that you can depend on.

Attendees to TN-815: CISSP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

Date/Time	Event
12/02/2024 - 12/13/2024 08:00 -16:00	TN-8150: CISSP Certification Preparation Seminar TechNow, Inc, San Antonio TX
02/03/2025 - 02/13/2025 08:00 -16:00	TN-8150: CISSP TechNow – San Antonio, TX, San Antonio TX
02/03/2025 - 02/13/2025 08:00 -16:00	TN-8150: CISSP Certification Preparation Seminar TechNow, Inc, San Antonio TX

Duration: 10 Days

Course Objectives:

Our CISSP Professional training program covers the 8 Domains of the CBK in-depth with an emphasis on rigorous exam preparation.

Security and Risk Management (Security, Risk, Compliance, Law, Regulations, Business Continuity)
Asset Security (Protecting Security of Assets)
Security Engineering (Engineering and Management of Security)
Communications and Network Security (Designing and Protecting Network Security)
Identity and Access Management (Controlling Access and Managing Identity)
Security Assessment and Testing (Designing, Performing, and Analyzing Security Testing)
Security Operations (Foundational Concepts, Investigations, Incident Management, Disaster Recovery)
Software Development Security (Understanding, Applying, and Enforcing Software Security)

Prerequisites:

To qualify for this CISSP training program you must first qualify for the CISSP exam, which requires:

4 years of experience in the information security field
or 3 years experience & a college degree

Contact TechNow to verify that you qualify.

Comments

Latest comments from students

Facilities comments:

User: pulliamp

Instructor comments:

Liked the class? Then let everyone know!

TN-959: UNIX Security Administrator Course

Course Overview:

The UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.

Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

AIDE
Apache
Best Practices for Kernel Tuning and Warning Banners
Boot Services
Chroot()
DNS- BIND
DNSSec
Evidence Collection and Preservation
Forensic Analysis
Forensic Preparation and Incident Handling
Host Based Firewalls – iptables
Intro to Forensics
OS Install and Patching
Physical, User Account, and Password Access Control
Se Linux
Sendmail
SSH
Stack Smashing
Sudo
Syslog-NG
UNIX Logging

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, networking, and security experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: wbcarter

Instructor comments: Good Stuff. Thanks!

User: ryuhas

Instructor comments: Very Good Instructor

Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.