PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI)

Course Overview:

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR).

Attendees to N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
  • Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
  • Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
  • Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
  • Optimize OSPFv2 and OSPFv3 behavior
  • Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
  • Implement route redistribution using filtering mechanisms
  • Troubleshoot redistribution
  • Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA)
  • Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
  • Optimize MP-BGP in IPv4 and IPv6 environments
  • Troubleshoot MP-BGP for IPv4 and IPv6
  • Describe the features of Multiprotocol Label Switching (MPLS)
  • Describe the major architectural components of an MPLS VPN
  • Identify the routing and packet forwarding functionalities for MPLS VPNs
  • Explain how packets are forwarded in an MPLS VPN environment
  • Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
  • Implement Dynamic Host Configuration Protocol (DHCP)
  • Describe the tools available to secure the IPV6 first hop
  • Troubleshoot Cisco router security features
  • Troubleshoot infrastructure security and services

Prerequisites:

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.  This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations.  PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC).  The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Active Directory and BloodHound
  • Security Controls
  • PKI
  • Encryption
  • Wireless & Network Security and Hardening DNS
  • 802.1x and Endpoint Protection
  • Firewalls and VPN
  • PowerShell Scripting
  • JEA, DSC, Enterprise Security with PowerShell
  • Windows Attack Strategies

Prerequisites:

  • Security+
  • Windows System Administration Skills

 

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class?  Then let everyone know!

TN-715: Systems Security Certified Practitioner (SSCP)

Course Overview:

Looking to move up in the information security field? If you have at least one year of security experience, you qualify for the Systems Security Certified Practitioner (SSCP) certification, which offers junior security professionals a way to validate their experience and demonstrate competence with (ISC²)®’s seven domains.

Attendees to TN-715: Systems Security Certified Practitioner (SSCP) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Access Controls
  • Security Operations and Administration
  • Analysis and Monitoring
  • Cryptography
  • Networks and Telecommunications
  • Malicious Code/Malware
  • Risk, Response, and Recovery

Prerequisites:

  • One year security experience
  • Some knowledge of the (ISC²)®’s seven domains

Comments

Latest comments from students

User: boyleb15

Instructor comments: Instructor was very knowledgeable on most items covered during this course. There were some topics he did lack the answer to. Instructor would also get sidetracked easily

User: keginth

Instructor comments: he was phenomenal with test prep and knew the book well

Facilities comments: adequate

Like the class?  Then let everyone know!

TN-905: Cyber Threat Intelligence Analysis

 

Course Overview:

TechNow has worked worldwide enterprise infrastructures for over 30 years and has developed demos and labs to exemplify the techniques required to demonstrate technologies that effectively support CTI.  This course integrates well with our courses TN-575: Open Source Network Security Monitoring and TN-865: Wireshark Network Traffic and Security Analysis .

TechNow develops Cyber Ranges and makes them available for conferences in support of annual meetings for Cyber Threat Response Teams.  Developing scenarios and reacting to them appropriately is a big part of the value in understanding the contexts required to comprehend valuable CTI.   As with many advanced TechNow security courses, there is a large hands-on ratio.  This course helps Cyber Protection Teams (CPT), Defensive Cyber Operations (DCO), and Mission Defense Teams (MDT) to collect, analyze and apply targeted cyber intelligence to defensive operations in order to proactively act on and tune response to attacks by cyber adversaries.  CPT, DCO, and MDT can take preemptive action by utilizing CTI, understanding CTI tools, techniques and procedures (TTPs) needed to generate and consume timely and relevant intelligence to improve resilience and prevention.

This course focuses on the collection, classification, and exploitation of knowledge about adversaries and their TTPs. .  MDT puts us close the mission and helps define the internal context to be analyzed against the CTI.  TechNow pushes the student to truly understand how to think about and use CTI to make a difference.

Attendees to TN-905: Cyber Threat Intelligence Analysis will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Learn to comprehend and develop complex scenarios
  • Identify and create intelligence requirements through practices such as threat modeling
  • Utilize threat modeling to drive intelligence handling and practices 
  • Breakdown tactical, operational, and strategic-level threat intelligence
  • Generate threat intelligence to detect, respond to, and defeat focused and targeted threats
  • How to collect adversary information creating better value CTI
  • How to filter and qualify external sources, mitigating low integrity intelligence
  • Create Indicators of Compromise (IOCs) in formats such as YARA, OpenIOC, and STIX
  • Move security maturity past IOCs into understanding and countering the behavioral tradecraft of threats
  • Breaking down threats mapped against their tradecraft to tweak IOCs
  • Establish structured analytical techniques to be successful in any security role
  • Learn and apply structured principles in support of CTI and how to communicate that to any security role.

Course Prerequisites:

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!