TN-575: Open Source Network Security Monitoring

Course Overview:

TN-575: Open Source Network Security Monitoring teaches students how to deploy, build, and run an NSM operation using open source software and vendor-neutral tools. No network is bullet proof and when attackers access your network, this course will show you how to build a security net to detect, contain, and control the attacker. Sensitive data can be monitored and deep packet and deep attachment analysis can be achieved. As organizations stand up a Security Operations Center (SOC) the enterprise NSM is the key ingredient to that SOC. This course not only teaches how to implement an NSM technologically, but how to effectively monitor an enterprise operationally. You will learn how to architect an NSM solution: where to deploy your NSM platforms and how to size them, stand-alone or distributed, and integration into packet analysis, interpret evidence, and integrate threat intelligence from external sources to identify sophisticated attackers. A properly implemented NSM is integral to incident response and provides the responders timely information to react to the incident. TN-575: Open Source Network Security Monitoring is a lab intensive environment with a cyber range that gives each student in-depth knowledge and practical experience monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls.

Attendees to TN-575: Open Source Network Security Monitoring class will receive TechNow approved course materials and expert instruction.

This Course is taught utilizing Security Onion or RockNSM as specified by the customer.

Dates/Locations:

No Events

Duration: 5 Days

Course Objective:

The focus of this course is to present a suite of Open Source security products integrated into a highly functional and scalable Network Security Monitoring solution.

Prerequisites:

Students should have a basic understanding of networks, TCP/IP and standard protocols such as DNS, HTTP, etc. Some Linux knowledge/experience is recommended, but not required

Course Outline:

Network Security Monitoring (NSM) Methodology
High Bandwidth Packet Capture Challenges
Installation of Security Onion
- Use Cases (analysis, lab, stand-alone, distributed)
- Resource Requirements
Configuration
- Setup Phase I – Network Configuration
- Setup Phase 2 – Service Configuration
- Evaluation Mode vs. Configuration Mode
- Verifying Services
Security Onion Architecture
- Configuration Files and Folders
- Network Interfaces
- Docker Environment
- Security Onion Containers
Overview of Security Onion Analyst Tools
- Kibana
- CapME
- CyberChef
- Squert
- Sguil
- NetworkMiner
Quick Review of Wireshark and Packet Analysis
- Display and Capture Filters
- Analyze and Statistics Menu Options
- Analysis for Signatures
Analyzing Alerts
- Replaying Traffic
- 3 Primary Interfaces:
  - Squert
  - Sguil
  - Kibana
- Pivoting Between Interfaces
- Pivoting to Full Packet Capture
Snort and Surricata
- Rule Syntax and Construction
- Implementing Custom Rules
- Implementing Whitelists and Blacklists
Hunting
- Using Kibana to Slice and Dice Logs
- Hunting Workflow with Kibana
Bro
- Introduction and Overview
  - Architecture, Commands
- Understanding and Examining Bro Logs
  - Using AWK, sort, uniq, and bro-cut
- Working with traces/PCAPs
- Bro Scripts Overview
  - Loading and Using Scripts
- Bro Frameworks Overview
  - Bro File Analysis Framework FAF
- Using Bro scripts to carve out more than files
RockNSM ( * If Applicable)
- Kafka
  - Installation and Configuration
  - Kafka Messaging
  - Brokers
  - Integration with Bro and FSF
- File Scanning Framework FSF
  - Custom YARA Signatures
  - JSON Trees
  - Sub-Object Recursion
  - Bro and Suricata Integration
Elastic Stack
- Adding new data sources in Logstash
- Enriching data with Logstash
- Automating with Elastalert
- Building new Kibana dashboards
Production Deployment
- Advanced Setup
- Master vs Sensor
- Node Types – Master, Forward, Heavy, Storage
- Command Line Setup with sosetup.conf
- Architectural Recommendations
- Sensor Placement
- Hardening
- Administration
- Maintenance
Tuning
- Using PulledPork to Disable Rules
- BPF’s to Filter Traffic
- Spinning up Additional Snort / Suricata / Bro Workers to Handle Higher Traffic Loads

Comments

Latest comments from students

Liked the class? Then let everyone know!

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-939: Hacker Techniques, Exploits, and Incident Handling Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the exam. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness. Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. The course concludes with exercising real attack strategies to demonstrate the techniques acquired throughout the course.

Attendees to TN-939: Hacker Techniques, Exploits, and Incident Handling will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

Backdoors & Trojan Horses
Buffer Overflows
Covering Tracks: Networks
Covering Tracks: Systems
Denial of Service Attacks
Exploiting Systems Using Netcat
Format String Attacks
Incident Handling Overview and Preparation
Incident Handling Phase 2: Identification
Incident Handling Phase 3: Containment
Incident Handling: Recovering and Improving Capabilities
IP Address Spoofing
Network Sniffing
Password Attacks
Reconnaissance
Rootkits
Scanning: Host Discovery
Scanning: Network and Application Vulnerability scanning and tools
Scanning: Network Devices (Firewall rules determination, fragmentation, and IDS/IPS evasion)
Scanning: Service Discovery
Session Hijacking, Tools and Defenses
Types of Incidents
Virtual Machine Attacks
Web Application Attacks
Worms, Bots & Bot-Nets

Prerequisites:

GSEC or equivalent experience
UNIX, Windows, Networking, and Security Experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: m_jurrens

Instructor comments: Both instructors Mr. Askey and Mr. Hackney, were very good. the open learning environment was extremely productive and I felt we all learned far more that we ever would out of a structured rote memorization course.

User: natebonds

Instructor comments: Both Mr. Askey and Hackney were extremely knowledgeable. They were also extremely interested in helping each student learn. I was particularly impressed with the way they tailored the course to optimize our time since we weren't testing. I feel like I know much much more than I did when the class started.

Facilities comments: The facilities were fine. I would have preferred it be closer to Lackland.

Liked the class? Then let everyone know!

TN-855: Advanced and In-Depth ICD 503 RMF, Controls, and Assessments

Course Overview:

This course is very hands-on with respect to SP 800-53 controls as related to ICD-503, leveraging experience with DCD 6/3, and incorporating a broad array of technologies found in the field. Assessors and Auditors have to face many technologies that are not part of the main stream. TechNow has gone to great efforts to build a very broad, comprehensive, and complex lab to simulate many scenarios and architectures. Technologies such as a network appliance that is not a typical infrastructure product, a radio/satellite communications device, or many other technologies that build up a weapon system. Students learn how controls are integrated into many different devices and how they fit in the overall security architecture of monitoring, reporting, and compliance testing.

Directly discussed are overlays for different requirements i.e.: tactical, medical, network type: JWICS, SIPR; IC or AF. TechNow has developed a funnel concept to overlays to exemplify the encapsulation of a control within different requirements. TechNow has over 15 years experience in Trusted Solaris/Trusted Extensions and labeled security. Cross Domain overlays are presented that fits the work flow of an assesor. PII overlays and any overlays that an organization uses and can be made available are also presented.

This course allows the student to leverage years of experience in DoD DCD 6/34 for transition to the Risk Management Framework (RMF) applied to the Intelligence Community as mandated by ICD 503. Utilizing NIST SP 800-37 to establish a baseline of RMF knowledge, the student learns how to integrate the NIST pubs to provide cohesive information assurance architectures and compliance. ICD 503 scorecard evaluations are integral in demonstrating a successful ICD 503 compliance program. TechNow's ICD 503 course provides students with the skill to assess security programs and evaluate ICD 503 compliance to build an improvement and sustainable program for score consistency. TechNow's instructors have unparralleled expertise in federal compliance initiatives, and we bring this expertise instructing students on the complete life cycle of RMF.

More than a simple checklist, we instruct students not only how to validate essential security controls, programs, and metrics, but that they are operating effectively. The student leaves the course knowing how to: identify gaps where controls, programs, or metrics are incomplete, missing or ineffective, and provide actionable findings and recommend remediation strategies. Students learn to internalize NIST pubs to meaningul and effective IA guidelines and work with the Body of Evidence templates which include: Risk Assessment Report (RAR), Systems Security Plan (SSP), Security Assessment Report (SAR), and Plans of Action and Milestone (POAM).

TechNow training materials are aligned with the most recent set of National Institute of Standards and Technology (NIST), Committee on National Security Systems (CNSS), and Office of the Director of National Intelligence (ODNI) policies standards, processes, policies and instructions to be addressed/explained include ICD 503, ICS 503-1, ICS 500-16, ICS 500-18, ICS 500-27, ICD 502, NIST SP 800-37, NIST SP 800-30, NIST SP 800-53, NIST SP 800-53A, NIST SP 800-137, NIST SP 800-47, CNSSP 22, CNSSI 1253, and CNSSI 4009.

A majority of time is spent on in-depth compliance review of NIST SP 800-53 controls. Instruction discusses which method should be used to test and validate each security control and what evidence should be gathered. This course is not theory or death by power point. Real scenarios are presented as exercises. A complete live cyber range simulating the IC is utilized for hands-on labs for techniques of validating and documenting compliance of NIST SP 800-53 controls as related to ICD 503.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Establish a baseline of RMF knowledge
Validate essential security controls, programs, and metrics
DoD DCD 6/3 to ICD 503 Transition
Lab Environtment and the Cyber Range
Overlays: Tactical, Medical, Network type(JWICS, SIPR; IC or AF), Cross Domain, PII
Risk Assessment Report (RAR)
Systems Security Plan (SSP)
Security Assessment Report (SAR)
Plans of Action and Milestone (POAM)

Prerequisites:

Experience in the field of auditing and assesments.

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
02/10/2025 - 02/14/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.