PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content. This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications. Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

Module 0 – Introduction & Overview
Mod 1: Advanced Interface
- Configuration
- Advanced NAT
- Policy-Based
- Forwarding
- Routing Protocols (OSPF)
Mod 2: App-ID™ –
- Custom Applications
- Defining New Application Signatures
- Application Override
Mod 3: Advanced Content-ID™
- Custom Threat Signatures
- Data Filtering
- DoS Protection
- Botnet Report
Mod 4: Advanced User-ID™
- Terminal Server Agent
- Captive Portal
- XML API

Day 2

Mod 5: Quality of Service
- Configuring Quality of Service
Mod 6: GlobalProtect™
- Implementation of GlobalProtect
- Install and Configure Portal, Gateway, and Agents
Mod 7: Monitoring and Reporting
- Log Forwarding
- SNMP
- Reporting
Mod 8: Active/Active High Availability
- Configuring Active/Active HA

Prerequisites:

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI)

Course Overview:

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR).

Attendees to N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
Optimize OSPFv2 and OSPFv3 behavior
Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
Implement route redistribution using filtering mechanisms
Troubleshoot redistribution
Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA)
Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
Optimize MP-BGP in IPv4 and IPv6 environments
Troubleshoot MP-BGP for IPv4 and IPv6
Describe the features of Multiprotocol Label Switching (MPLS)
Describe the major architectural components of an MPLS VPN
Identify the routing and packet forwarding functionalities for MPLS VPNs
Explain how packets are forwarded in an MPLS VPN environment
Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
Implement Dynamic Host Configuration Protocol (DHCP)
Describe the tools available to secure the IPV6 first hop
Troubleshoot Cisco router security features
Troubleshoot infrastructure security and services

Prerequisites:

CCNA certification
N-415: Implementing and Operating Cisco Enterprise Network Core Technologies
General understanding of network fundamentals
Basic knowledge of how to implement LANs
General understanding of how to manage network devices
General understanding of how to secure network devices
Basic knowledge of network automation

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
02/10/2025 - 02/14/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

TN-969: Windows Security Administrator Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs to secure Windows systems. Lecture and labs start with quick review of Active Directory and group policy to enforce security mechanisms within the Windows architecture. Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. PowerShell is made for SecOps/DevOps automation and students will learn to write PowerShell scripts to automate security operations and Desired State Configuration (DSC). The course concludes with exercising real attack strategies to demonstrate the effectives of properly securing your host.

Attendees to TN-969: Windows Security Administrator course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Active Directory and BloodHound
Security Controls
PKI
Encryption
Wireless & Network Security and Hardening DNS
802.1x and Endpoint Protection
Firewalls and VPN
PowerShell Scripting
JEA, DSC, Enterprise Security with PowerShell
Windows Attack Strategies

Prerequisites:

Security+
Windows System Administration Skills

Comments

Latest comments from students

User: bbrabender

Instructor comments: Instructor was very knowledgeable and help more inexperienced users with concepts as well explaining in a way that can be understood.

Facilities comments: N/A

User: dale.r.anderson

Instructor comments: Instructor was well knowlegeable accross alot of domains.

Facilities comments: Pretty good

Liked the class? Then let everyone know!

CT-395: CySA+ Cybersecurity Analyst

Course Overview:

CT-395: CompTIA CySA+ Cybersecurity Analyst is for IT professionals looking to gain IT security analyst skills, and for those following the recommended skills pathway to achieve cybersecurity mastery. It provides a bridge between CompTIA Security+ (CT-325) and CompTIA Advanced Security Practitioner (CASP,CT-425), thus completing a certification path within the CompTIA family of certifications. As attackers have learned to evade traditional signature-based solutions, an analytics-based approach has become extremely important. CySA+ applies behavioral analytics to the IT security market to improve the overall state of security. The CompTIA Cybersecurity Analyst (CySA+) certification verifies that successful candidates have the knowledge and skills required to configure and use threat detection tools, perform data analysis and interpret the results to identify vulnerabilities, threats and risks to an organization, with the end goal of securing and protecting applications and systems within an organization. Let us help you bridge this gap, and leave you prepared for the certification exam (CS0-002).

TechNow is a CompTIA partner uses official CompTIA CySA+ curriculum.

Dates/Locations:

Date/Time	Event
03/03/2025 - 03/07/2025 09:00 -17:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX
06/02/2025 - 06/06/2025 09:00 -17:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

Threat Management
Vulnerability Management
Cyber Incident Response
Security Architecture and Tool Sets

Prerequisites:

While there is no required prerequisite, the CompTIA CySA+ certification is intended to follow CT-325: Security+ or equivalent experience. It is recommended for CompTIA CySA+ candidates to have the following:

3-4 years of hands-on information security or related experience
Network+, Security+, or equivalent knowledge.

Comments

Latest comments from students