TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!

TN-335: Advanced Penetration Testing Using Open Source Tools

Course Overview:

This is an advanced course that assumes the attendee is a qualified security professional with experience using security tools and understands the concepts behind penetration testing. Courses that build up the expertise that enables a student to succeed in this course is Security+, CEH, CISSP, and any of the GIAC certifications. This course is completely hands-on and utilizes the BackTrack tool suite from backtrack-linux.org. The course covers, in detail, various attacks and tools that are contained in the BackTrack tool suite.

Attendees to TN-335: Advanced Penetration Testing Using Open Source Tools will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Information Security and Open Source Software
  • Operating System Tools
  • Firewalls
  • Scanners
  • Vulnerability Scanners
  • Network Sniffers
  • Intrusion Detection Systems
  • Analysis and Management Tools
  • Encryption Tools
  • Wireless Tools
  • Forensic Tools
  • More on Open Source Software

Prerequisites:

  • Experience in IT Security
  • Solid basic knowledge of networks and TCP/IP
  • Experience in command line under Linux and Windows is required

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-999: Reverse Engineering Malware Course

Course Overview:

This course is designed for professionals that are expected to do malware analysis. A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics Reverse Engineering Malware.

Attendees to TN-999: Reverse Engineering Malware will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Toolkit and Lab Assembly
  • Malware Code and Behavioral Analysis Fundamentals
  • Malicious Static and Dynamic Code Analysis
  • Collecting/Probing System and Network Activities
  • Analysis of Malicious Document Files
  • Analyzing Protected Executables
  • Analyzing Web-Based Malware
  • DLL Construction and API Hooking
  • Common Windows Malware Characteristics in x86 Assembly
  • Unpacking Protected Malware
  • In-Depth Analysis of Malicious Browser Scripts, Flash Programs and Office
  • In-Depth Analysis of Malicious Executables
  • Windows x86 Assembly Code Concepts for Revers-Engineering Memory Forensics for Rootkit Analysis

Prerequisites:

  • Strong understanding of core systems and network concepts
  • Exposure to programming and assembly concepts
  • Comfortable with command line access

Comments

Latest comments from students

User: marcus.osullivan

Instructor comments: Good stuff. I like the beginning half where there was help from an additional instructor to facilitate fixing computer errors that inevitably popped up.

Facilities comments: The baby deer were neat! I like the resort.

Liked the class?  Then let everyone know!

TN-949: Certified Firewall Analyst Course

Course Overview:

This is a hands-on course that covers many of the concepts of securing the perimeter of an organization. This includes concepts such as intrusion detection, packet filtering, and central logging.

A skills focus enables the student to better absorb the subject matter and perform better on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Firewalls.

This course is an excellent precursor to PA-215 Palo Alto Firewall Essentials FastTrack.

Attendees to TN-949: Certified Firewall Analyst Prep will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Analyzing Network and Wireless Design
  • Creating and Auditing a Rulebase
  • Firewall Assessment and Penetration Testing
  • Host-Based Detection and DLP
  • Incident Detection and Analysis
  • IOS and Router Security
  • IPv6 and ICMPv6
  • Log Collection and Analysis
  • NAT and Proxies
  • Netfilter IPtables
  • Network Access Control
  • Network-Based Intrusion Detection
  • Packet Filters and Inspection
  • Packet Fragmentation
  • Perimeter Concepts and IP Fundamentals
  • Securing Hosts and Services
  • TCP/IP Protocols
  • VPN Design and Auditing
  • VPN Implementation

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking and security  experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class?  Then let everyone know!

cheddarcon-powershell-threat-hunting-registration

After you press "Request Registration" near the bottom of this form, within 30 seconds, status will be provided at the bottom of the form, you will also be contacted by phone for credit card information.

Tech Now is pleased to have the opportunity to provide you training for "Windows Security Automation and Threat Hunting with PowerShell” at CheddarCon 2018!

Scroll down to see the course description.

First Name*
Last Name*
Your Email*
Your Organization*
Phone*

Questions:

After you press "Request Registration" on this form, within 30 seconds, status will be provided at the bottom of the form, you will also be contacted by phone for credit card information.

Windows Security Automation and Threat Hunting with PowerShell Seminar

Location: 400 W Wisconsin Ave, Milwaukee, WI 53203, USA

Date: October 10, 2018 8:00am – 4:00pm

Duration: 8 hours

Audience: Cyber Security professionals and Windows administrators

Attendees Environment: Laptops not required, but suggested to have better hands-on absorption of subject matter.

Description:
PowerShell is both a command-line shell and scripting language. Fight fires quickly using existing or custom PowerShell commands or scripts at the shell. PowerShell is made for Security Operations (SecOps) automation on Windows. This seminar does not require prior programming skills. The seminar focuses on PowerShell programming, giving a beginner skills to be productive in windows scripting to automate tasks and also remediate problems.

Cyber Security is the objective of this seminar, and the PowerShell examples will demonstrate PowerShell capabilities that help lock down a Windows system and also report security status.

Objectives:

PowerShell Overview

  • Getting started running commands
  • Security cmdlets
  • Using and updating the built-in help
  • Execution policies
  • Fun tricks with the ISE graphical editor
  • Piping .NET and COM objects, not text
  • Using properties and methods of objects
  • Helping Linux admins feel more at home
  • Aliases, cmdlets, functions, modules, etc.

PowerShell Utilities and Tips

  • Customizing your profile script
  • PowerShell remote command execution
  • Security setting across the network
  • File copy via PowerShell remoting
  • Capturing the output of commands
  • Parsing text files and logs with regex patterns
  • Parsing Security Logs
  • Searching remote event logs
  • Mounting the registry as a drive
  • Security settings in the Registry
  • Exporting data to CSV, HTML and JSON files
  • Running scripts as scheduled jobs
  • Continued Security Compliance
  • Pushing out scripts through Group Policy
  • Importing modules and dot-sourcing functions
  • http://www.PowerShellGallery.com

PowerShell Scripting

  • PowerShell Scripting to implement Security Practices
  • Writing your own functions to automate security status and settings
  • Passing arguments into your scripts
  • Function parameters and returning output
  • Flow control: if-then, foreach, that make security decisions
  • How to pipe data in/out of your scripts for security compliance and reporting

Attendees to this seminar, Windows Security Automation and Threat Hunting with PowerShell, will receive TechNow approved course materials and expert instruction.[/wr_text][/wr_column][/wr_row]