PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

L-245: Linux System Administration I

Course Overview:

In this course students will learn to install the Linux™ operating system, to administer users and software, to use vi, basic Linux security, process control, file system maintenance, backup and recovery, including some basic networking concepts. This course insures that students have the skills to configure all desktop and client side related activity.

Attendees to L-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Linux operating system installation
  • Hardware Issues
  • LILO & GRUB Configuration
  • Managing the Linux file system
  • Boot Process
  • Customization of setup files
  • System Startup
  • Run Levels
  • Network Services
  • User Management
  • Changing Passwords
  • Monitoring, accessing & restricting root system access
  • Administration Tools
  • Disk Management
  • Quotas
  • Process Control
  • Installing & removing software & patches
  • Network Configuration
  • Client side components of NFS, Samba, NTP, NIS
  • Printing
  • Backup and Recovery
  • Using utilities for process control, locating files & automating maintenance tasks

Prerequisites:

  • Students should have an understanding of all basic UNIX commands as well as variable substitution, wild card expansion, command pipes, permissions, the grep  and find commands.
  • These prerequisites can be met through completion of TN-125: Introduction to UNIX & Linux and six month’s experience with Linux.

 

Comments

Latest comments from students

User: flores2015

Instructor comments: Very Good Instructor (Bill Peterson)

Facilities comments: Nice - Can't wait for your new facility.

Liked the class?  Then let everyone know!

RH-245: Linux System Administration I

Course Overview:

The System Administration I for Red Hat course is designed for IT professionals working to become full-time enterprise Linux system administrators. This course gives the student direct experience with the most essential system administration tasks in the Red Hat. You will be instructed in crucial system management skills including: configuring network interfaces, client set up of network protocols, managing local disk devices, installation, package management, performing system boot procedures, grub and controlling system processes.

Attendees to RH-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Installation
  • Manage File Systems and Local Disk Drives
  • Perform Mounts and Unmounts
  • Perform System Boot Procedures
  • Tuning and Maintaining the Kernel
  • Control System Processes
  • Perform User Administration
  • Installing and Managing Services
  • Perform Package Administration
  • Client Setup of SSH and Printing

Prerequisites:

Comments

Latest comments from students

User: mlspence

Instructor comments: Bill was awesome! He did a fantastic job teaching the course mater to everyone in the class. He made sure everyone was able to keep up and that they understood the material before moving on. Thanks!

Facilities comments: They were great as well

Liked the class?  Then let everyone know!

TN-715: Systems Security Certified Practitioner (SSCP)

Course Overview:

Looking to move up in the information security field? If you have at least one year of security experience, you qualify for the Systems Security Certified Practitioner (SSCP) certification, which offers junior security professionals a way to validate their experience and demonstrate competence with (ISC²)®’s seven domains.

Attendees to TN-715: Systems Security Certified Practitioner (SSCP) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Access Controls
  • Security Operations and Administration
  • Analysis and Monitoring
  • Cryptography
  • Networks and Telecommunications
  • Malicious Code/Malware
  • Risk, Response, and Recovery

Prerequisites:

  • One year security experience
  • Some knowledge of the (ISC²)®’s seven domains

Comments

Latest comments from students

User: boyleb15

Instructor comments: Instructor was very knowledgeable on most items covered during this course. There were some topics he did lack the answer to. Instructor would also get sidetracked easily

User: keginth

Instructor comments: he was phenomenal with test prep and knew the book well

Facilities comments: adequate

Like the class?  Then let everyone know!

TN-865: Wireshark Network Traffic and Security Analysis

Course Overview:

This course delivers the technical knowledge, insight, and hands-on training to receive in-depth knowledge on Wireshark® and TCP/IP communications analysis. You will learn to use Wireshark to identify the most common causes of performance problems in TCP/IP communications. You will learn about the underlying theory of TCP/IP and the most used application protocols, so that you can intelligently examine network traffic for performance issues or possible Indicators of Compromise (IoC).

Duration: 5 Days

Audience:

Anyone interested in learning to troubleshoot and optimize TCP/IP networks and analyze network traffic with Wireshark, especially network engineers, information technology specialists, and security analysts.

Course Prerequisites:

We recommend that attendees of this course have the following prerequisite:
• Network+

Dates/Locations: No Events

Course Outline:

DAY ONE

Course Set Up and Analyzer Testing

Network Analysis Overview
Wireshark Functionality Overview
Capturing Wired and Wireless Traffic
Define Global and Personal Preferences for Faster Analysis
Defined Time Values and Interpret Summaries
Interpret Basic Trace File Statistics to Identify Trends
Create and Apply Display Filters for Efficient Analysis

DAY TWO

Follow Streams and Reassemble Data
Use Wireshark’s Expert System to Identify Anomalies
TCP/IP Analysis Overview
Analyze Common TCP/IP Traffic Patterns

DAY THREE

Graph I/O Rates and TCP Trends
802.11 (WLAN) Analysis Fundamentals
Voice over IP (VoIP) Analysis Fundamentals
Network Forensics Fundamentals

DAY FOUR

Detect Scanning and Discovery Processes
Analyze Suspect Traffic

DAY FIVE

Use Command‐Line Tools

Next/Related Courses: