PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

P-325: Python Programming

Course Overview:

This is an introductory course into the Python scripting language. This class uses a hands-on approach in teaching the Python language. This course builds the prerequisite skills for TechNow's P-345: Python for Pentration Testers course. Getting comfortable with Python is important to understanding how Python can be utilitized for offensive measures.

This course is hands-on with the instructor walking the students through many short examples to exemplify an objective. Dexterity with the language comes through many small code examples to produce the desired result. Students have fun acquiring points for all the code examples they get correct. We must be having fun because TechNow is always amazed at how competitive students are in trying to acquire the most points!

The instructor will focus on the level that each student is currently at, and ensure the student absorbs the subject matter. Programming is not a daily tasking of administrators or offensive operators and TechNow understands that. As an instructor led course TechNow is very successful in making Python accessible to those who do not live eat and breath programming. If a student's ultimate goal is to attend a course like TechNow's P-345: Python for Pentration Testers course, then not being bogged down in the Python language is critical, and this course (P-325: Python Programming) meets that objective.

Recently we have introduced Raspberry Pi's and multiple sensors to the P-325: Python Programming course. This enables the student to actually see productive results from their coding skills in the physical world! Some examples that students create programs for are: Motion detectors, distance, temperature, cameras and keypads.

Attendees to P-325: Python Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

How Python Runs Programs
Introducing Python Object Types
- Numeric Types
- Dynamic Typing
Variables
Regular Expressions
Strings
Conditionals
- if Tests and Syntax Rules
Lists and Dictionaries
Tuples and Files
Introducing Python Statements
Assignments, Expressions, and Prints
while and for Loops
Iterations and Comprehensions
Documentation
Function Basics
Built-In Functions
Scopes
Arguments
Modules
Module Packages and Importing
Classes and OOP
Operator Overloading
Recursion
Exception Coding Details
Exception Objects
Unicode and Byte Strings
Working with Raspberry Pi
- Writing code for sensors

Prerequisites:

Experience with some form of programming is preferred

Comments

Latest comments from students

User: slewis8435

Instructor comments: Very good instructor - he was excited about the material, very knowledgeable, and explained things clearly.

Facilities comments: The facilities were fine - plenty of room for each student to set up an extra computer and have room for note taking

User: nathan.karras

Instructor comments: Instructor was extremely knowledgeable in programming and scripting. He encouraged students to explore and ask questions. He would work with individuals to troubleshoot lab problems sets. Would highly recommend as an instructor.

Facilities comments: Room got a little warn. Instructor purchased fans to cool things off for the class. Projector had over scan.

Liked the class? Then let everyone know!

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security. TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Radio Frequency (RF) Fundamentals
Spread Spectrum Technologies
802.11 Network Architecture
Physical & MAC Layers
Hardware Installation, Configuration, & Management
Antennas & Accessories
Wireless Network Management
Troubleshooting Wireless LANs
Site Surveying
Wireless LAN Security
Organizations & Standards

Prerequisites:

Attendees should have network administration skills. These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class? Then let everyone know!

L-295: Linux System Administration II

Course Overview:

In this course students will learn to configure the Linux kernel, install & configure modules, to install and configure non-default devices and automate installation with Kickstart. Students also utilize skills developed in L-245 to expand on file system configuration with spanning devices and RAID. This is the foremost server side Linux course in the industry covering all server side components such as DHCP, Samba, NIS, LDAP, inet, telnet ftp, dns, etc. Expanding on security introduced in L-245: Linux System Administration I, TCP wrappers, firewalling with IP filters, SQUID, & ssh are covered.

Attendees to L-295: Linux System Administration II will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Custom installation of a Linux server
Linux device naming conventions & the boot process
Adding peripheral devices
Reconfiguring the kernel
Disk partitioning & formatting
Changing system run levels
Adding startup files for additional services
Adding & removing software packages
Disk & file system Administration
Terminals & modem configuration
Configuring NFS to support the client/server environment
Use the automounter
Server side components such as DHCP, Samba, NIS, LDAP, inet, telnet, ftp, DNS, etc.
Troubleshooting techniques
Advanced Linux installation

Prerequisites:

L-245: Linux System Administration I plus six months experience as a systems administrator or one year or more of administrating the Linux operating system.

Comments

Latest comments from students

Liked the class? Then let everyone know!

CL-315: CCSP – Certified Cloud Security Professional Preparation Seminar

Course Overview:

TechNow’s CCSP Certification Preparation Seminar is an accelerated course designed to meet the high demands of the information security industry by preparing students for the industry standard Certified Cloud Security Professional exam. The exam covers (ISC)²’s 6 Domains from the Common Body of Knowledge, which encompass the whole of cloud security.

This course is an intense 5 day program. TechNow has a proven training and certification track record that you can depend on. CCSP test is 125 questions that typically require more comprehension than CISSP questions. The instructor takes time to walk through scenarios that assume comprehensive knowledge of enterprise infrastructures.

Attendees to CL-315: CCSP Certification Preparation Seminar will receive TechNow approved course materials and expert instruction.

The 6 domains of the CCSP CBK:

Architectural Concepts & Design Requirements
Cloud Data Security
Cloud Platform & Infrastructure Security
Cloud Application Security
Operations
Legal & Compliance

Duration: 5 days

Audience: Mid-level to advanced professionals involved with IT architecture, web and cloud security engineering, information security, governance, risk and compliance, and even IT auditing. CCSPs will be responsible for cloud security architecture, design, operations, and/or service orchestration.

DoD 8140: Not Mandated

Course Prerequisites: IT professional with 5 years of experience, 3 years of security experience, and at least 1 year of cloud security experience. GSEC, CISSP, CASP or equivalent experience in managing enterprise infrastructures. CCSP test is 125 questions that typically require more comprehension than CISSP questions. This course is for those who are already qualified at the enterprise level for IT infrastructures, have Cloud experience, and are looking for a Cloud Security certification.

Course Objectives:

Domain 1: Architectural Concepts and Design Requirements

Module 1: Understand cloud computing concepts
Module 2: Describe cloud reference architecture
Module 3: Understand security concepts relevant to cloud computing
Module 4: Understand design principles of secure cloud computing
Module 5: Identify trusted cloud services

Domain 2: Cloud Data Security

Module 1: Understand Cloud Data Life Cycle
Module 2: Design and Implement Cloud Data Storage Architectures
Module 3: Understand and implement Data Discovery and Classification Technologies
Module 4: Design and Implement Relevant Jurisdictional Data Protection for Personally Identifiable Information (PII)
Module 5: Design and implement Data Rights Management
Module 6: Plan and Implement Data Retention, Deletion, and Archival policies
Module 7: Design and Implement Auditability, Traceability, and Accountability of Data Events

Domain 3: Cloud Platform Infrastructure Security

Module 1: Comprehend Cloud Infrastructure Comp
Module 2: Analyze Risks Associated to Cloud Infrastructure
Module 3: Design and Plan Security Controls
Module 4: Plans Disaster Recovery & Business Continuity Management

Domain 4: Cloud Application Security

Module 1: Recognize Need for Training and Awareness in Application Security
Module 2: Understand Cloud Software Assurance and Validation
Module 3: Use Verified Secure Software
Module 4: Comprehend the Software Development Life Cycle (SDLC) Process
Module 5: Apply the Secure Software Development Life Cycle
Module 6: Comprehend the Specifics of Cloud Application Architecture
Module 7: Design Appropriate Identity and Access Management (IAM) Solutions

Domain 5: Operations

Module 1: Support the Planning Process for the Data Center Design
Module 2: Implement and Build Physical Infrastructure for Cloud Environment
Module 3: Run Physical Infrastructure for Cloud Environment
Module 4: Manage Physical Infrastructure for Cloud Environment
Module 5: Build Logical Infrastructure for Cloud Environment
Module 6: Run Logical Infrastructure for Cloud Environment
Module 7: Manage Logical Infrastructure for Cloud Environment
Module 8: Ensure Compliance with Regulations and Controls
Module 9: Conduct Risk Assessment to Logical and Physical Infrastructure
Module 10: Understand the Collection and Preservation of Digital Evidence
Module 11: Manage Communications with Relevant Parties

Domain 6: Legal and Compliance

Module 1: Understand Legal Requirements and Unique Risks Within the Cloud Environment
Module 2: Understand Privacy Issues, Including Jurisdictional Variances
Module 3: Understand Audit Process, Methodologies, and Required Adaptions for a Cloud Environment
Module 4: Understand Implication of Cloud to Enterprise Risk Management
Module 5: Understand Outsourcing and Cloud Contract Design
Module 6: Execute Vendor Management

Dates/Locations: No Events