PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

RH-245: Linux System Administration I

Course Overview:

The System Administration I for Red Hat course is designed for IT professionals working to become full-time enterprise Linux system administrators. This course gives the student direct experience with the most essential system administration tasks in the Red Hat. You will be instructed in crucial system management skills including: configuring network interfaces, client set up of network protocols, managing local disk devices, installation, package management, performing system boot procedures, grub and controlling system processes.

Attendees to RH-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Installation
  • Manage File Systems and Local Disk Drives
  • Perform Mounts and Unmounts
  • Perform System Boot Procedures
  • Tuning and Maintaining the Kernel
  • Control System Processes
  • Perform User Administration
  • Installing and Managing Services
  • Perform Package Administration
  • Client Setup of SSH and Printing

Prerequisites:

Comments

Latest comments from students

User: mlspence

Instructor comments: Bill was awesome! He did a fantastic job teaching the course mater to everyone in the class. He made sure everyone was able to keep up and that they understood the material before moving on. Thanks!

Facilities comments: They were great as well

Liked the class?  Then let everyone know!

L-245: Linux System Administration I

Course Overview:

In this course students will learn to install the Linux™ operating system, to administer users and software, to use vi, basic Linux security, process control, file system maintenance, backup and recovery, including some basic networking concepts. This course insures that students have the skills to configure all desktop and client side related activity.

Attendees to L-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Linux operating system installation
  • Hardware Issues
  • LILO & GRUB Configuration
  • Managing the Linux file system
  • Boot Process
  • Customization of setup files
  • System Startup
  • Run Levels
  • Network Services
  • User Management
  • Changing Passwords
  • Monitoring, accessing & restricting root system access
  • Administration Tools
  • Disk Management
  • Quotas
  • Process Control
  • Installing & removing software & patches
  • Network Configuration
  • Client side components of NFS, Samba, NTP, NIS
  • Printing
  • Backup and Recovery
  • Using utilities for process control, locating files & automating maintenance tasks

Prerequisites:

  • Students should have an understanding of all basic UNIX commands as well as variable substitution, wild card expansion, command pipes, permissions, the grep  and find commands.
  • These prerequisites can be met through completion of TN-125: Introduction to UNIX & Linux and six month’s experience with Linux.

 

Comments

Latest comments from students

User: flores2015

Instructor comments: Very Good Instructor (Bill Peterson)

Facilities comments: Nice - Can't wait for your new facility.

Liked the class?  Then let everyone know!

DoD 8570

DoD 8570 Training

The Department of Defense requires that all information assurance personnel must become compliant with IT and security certification standards.

DoD 8570 training, also called Information Assurance training, is available through TechNow to provide you with the certification that is required.  Your DoD 8570 training  ( information assurance training ) at TechNow will provide you with all of the courses necessary to receive your DoD 8570.01-M certification.

Ongoing open enrollment through TechNow is available for our DoD 8570.01-M courses.

Please review the full & updated DoD approved IA baseline certifications aligned to each category & level of the IA workforce.


 

 

For further information or to schedule for classes, call us at 800-324-2294

 

in   

PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!