PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

L-245: Linux System Administration I

Course Overview:

In this course students will learn to install the Linux™ operating system, to administer users and software, to use vi, basic Linux security, process control, file system maintenance, backup and recovery, including some basic networking concepts. This course insures that students have the skills to configure all desktop and client side related activity.

Attendees to L-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Linux operating system installation
Hardware Issues
LILO & GRUB Configuration
Managing the Linux file system
Boot Process
Customization of setup files
System Startup
Run Levels
Network Services
User Management
Changing Passwords
Monitoring, accessing & restricting root system access
Administration Tools
Disk Management
Quotas
Process Control
Installing & removing software & patches
Network Configuration
Client side components of NFS, Samba, NTP, NIS
Printing
Backup and Recovery
Using utilities for process control, locating files & automating maintenance tasks

Prerequisites:

Students should have an understanding of all basic UNIX commands as well as variable substitution, wild card expansion, command pipes, permissions, the grep and find commands.
These prerequisites can be met through completion of TN-125: Introduction to UNIX & Linux and six month’s experience with Linux.

Comments

Latest comments from students

User: flores2015

Instructor comments: Very Good Instructor (Bill Peterson)

Facilities comments: Nice - Can't wait for your new facility.

Liked the class? Then let everyone know!

N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology, from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT). Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting. This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
Configure the Firepower Management Center (FMC)
Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
Describe the Cisco Firepower Systems infrastructure
Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
Describe the System Configuration and Health policies and implement them
Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
Describe, create, and implement objects for use in Access Control policies
Create DNS and URL policies and configure Sinkholes
Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
Describe advanced policy configuration and Firepower system configuration options
Configure Malware Policies to find and stop Malware
Understand Security Intelligence, and how to configure SI to stop attacks NOW!
Configure policies to find and stop Ransomware
Understand how to fine tune IPS policies
Understand how to find tun Snort Preprocessor policies (NAP)
Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
Analyze events
Create reporting templates and schedule them
Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
Set up external authentication for users using LDAP/Realms
Configuring system integration, realms, and identity sources
Configure FMC domains and implement them
Configure FTD HA with two FTD devices
SSL Policy – decrypt your traffic
AnyConnect and Site-to-Site VPN
Understand network and host based AMP. Configure and analyze host based AMP
Understand Cisco Identity Services Engine (ISE)
Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Cisco Certified Network Associate (CCNA) certification. or equivalent
Cisco Certified Network Associate Security (CCNA Security) certification. or equivalent
Working knowledge of the Microsoft Windows operating system.

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-959: UNIX Security Administrator Course

Course Overview:

The UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.

Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

AIDE
Apache
Best Practices for Kernel Tuning and Warning Banners
Boot Services
Chroot()
DNS- BIND
DNSSec
Evidence Collection and Preservation
Forensic Analysis
Forensic Preparation and Incident Handling
Host Based Firewalls – iptables
Intro to Forensics
OS Install and Patching
Physical, User Account, and Password Access Control
Se Linux
Sendmail
SSH
Stack Smashing
Sudo
Syslog-NG
UNIX Logging

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, networking, and security experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: wbcarter

Instructor comments: Good Stuff. Thanks!

User: ryuhas

Instructor comments: Very Good Instructor

Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.

Liked the class? Then let everyone know!

RH-245: Linux System Administration I

Course Overview:

The System Administration I for Red Hat course is designed for IT professionals working to become full-time enterprise Linux system administrators. This course gives the student direct experience with the most essential system administration tasks in the Red Hat. You will be instructed in crucial system management skills including: configuring network interfaces, client set up of network protocols, managing local disk devices, installation, package management, performing system boot procedures, grub and controlling system processes.

Attendees to RH-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Installation
Manage File Systems and Local Disk Drives
Perform Mounts and Unmounts
Perform System Boot Procedures
Tuning and Maintaining the Kernel
Control System Processes
Perform User Administration
Installing and Managing Services
Perform Package Administration
Client Setup of SSH and Printing

Prerequisites:

TN-125: Introduction to UNIX and Linux

Comments

Latest comments from students

User: mlspence

Instructor comments: Bill was awesome! He did a fantastic job teaching the course mater to everyone in the class. He made sure everyone was able to keep up and that they understood the material before moving on. Thanks!

Facilities comments: They were great as well