PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-813: Certified in Governance, Risk and Compliance (CGRC)

Course Overview:

TN-813: Certified in Governance, Risk, and Compliance (CGRC) course is for the (ISC)²® Certified in Governance, Risk, and Compliance (CGRC) credential previously known as Certified Authorization Professional (CAP). This course walks the student through the Risk Management Framework following practices the NIST pubs. CGRC is an objective measure of the knowledge, skills and abilities required for personnel involved in the process of certifying and accrediting security of information systems. Specifically, this credential applies to those responsible for formalizing processes used to assess risk and establish security requirements. Their decisions will ensure that information systems possess security commensurate with the level of exposure to potential risk, as well as damage to assets or individuals.The CGRC credential is appropriate for civilian, state and local governments in the U.S., as well as commercial markets. CGRC certification applies to job functions such as authorization officials, system owners, information owners, information system security officers, and certifiers. CGRC is crucial to the Management staff.

This course is the “why” of the entire security field. It provides a logical way of allocating resources where there is greatest risk and why we make the decisions we make in the field of security. It is TechNow’s view that of all the security courses we have seen, this course genuinely puts the “big picture” of security in front of the students. Students actually come to an understanding of truly what is critical to security of an enterprise versus a bunch of nuts and bolts of security.

TechNow’s CGRC course covers all of the (ISC)²® CGRC 7 Knowledge domains:

Security and Privacy Governance, Risk Management, and Compliance Program
Scope of the System
Selection and Approval of Framework, Security, and Privacy Controls
Implementation of Security and Privacy Controls
Assessment/ Audit of Security and Privacy Controls
System Compliance
Compliance Maintenance

RMF Related Steps

Prepare – Process Initiation
Categorize Information Systems
Establish the Security Control Baseline
Apply Security Controls
Assess Security Controls
Authorize Information System
Monitor Security Controls

TechNow’s CGRC Instructors have extensive knowledge and experience in the field, and have been working with organizations to build assessor teams for over 20 years.

Attendees to TN-813: Certified in Governance, Risk, and Compliance (CGRC) will receive TechNow authorized training materials, including access to the documentation of the CGRC Exam domains, and expert instruction.

Dates/Locations:

No Events

Duration: 3 Days

Course Objectives:

Initiate the Preparation Phase
Perform Execution Phase
Perform Maintenance Phase
Understand the Purpose of Security Authorization

Prerequisites:

IT Security
Information Assurance
Information Risk Management certification and systems administration
1-2 years of general experience technical experience
2 years of general systems experience
1-2 years of Database/Systems Development/Network Experience
Information Security Policy Experience

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies

Course Overview:

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies is the big picture overview of a SOC, other courses provide a deep dive into the technologies that a SOC may utilize. This course addresses the internal workings of staff, skills required, required authorizations, internal agreements, and setting appropriate expectation levels of a SOC within budget constraints. A SOC is not a one size fits all, the instructor has decades of security experience and brings to the table opportunities to discuss what can work within constraints. Many organizations are coming to the realization that some level of a SOC is now required and to learn just what decisions need to be made: Out-sourced, In-sourced, budgets, capabilities and many more. Students leave with a worksheet of how to progress when they get back to their organization.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies – Is a course that incorporates lecture, demos, and group exercises for standing up a Security Operations Center (SOC). Students learn strategies and resources required to deploy, build, and run Network Security Monitoring (NSM) and work roles and flows for a SOC. No network is bullet proof and when attackers access your network, this course will show you options and resources to build a security net to detect, contain, and control the attacker. Examples on what it takes to architect an NSM solution to identify sophisticated attackers and a response strategy. Properly implemented detection and response technologies is integral to incident response and provides the responders timely information and tools to react to the incident. Effective demonstrations are given of Open Source technologies that build up a SOC, but any software can be used and demonstrations are provided to demonstrate technology families not push a specific solution.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies demonstrations utilize a cyber range that gives each student in-depth knowledge of monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls; and software and services to provide orchestrate Incident Response, Intelligence Analysis, and Hunt Operations.

Attendees to TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies class will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 2 Days

Course Objective:

Prerequisites:

Students should have an understanding of the security field.

Course Outline:

What threats does my organization care about?
What does a threat look like?
What does a threat look like?
How to present the SOC internally.
Communication with Stakeholders and Executives
People
- Establishing a skill matrix and work roles for SOC members
- Establishing a training path
- Personnel background requirementsProcesses
Processes
- Alignment to standards: NIST, PCI, HIPAA, etc.
- Risk related decision trees
- Playbooks
- Threat Intelligence Integration
Technology – Tool Suites to Support:
- Ethical Hacking
- Network Security Monitoring and SIEM
- Forensics
- Dashboards
- Analysis and Hunting
- Incident Management and Ticketing

Comments

Latest comments from students

Liked the class? Then let everyone know!

TN-415: Computer Hacking Forensics Investigator (CHFI)

Course Overview:

The Computer Hacking Forensic Investigator (CHFI) course delivers the security discipline of digital forensics from a vendor-neutral perspective. CHFI is a comprehensive course covering major forensic investigation scenarios and enabling students to acquire necessary hands-on experience with various forensic investigation techniques and standard forensic tools necessary to successfully carry out a computer forensic investigation leading to the prosecution of perpetrators.

The CHFI certification gives participants the necessary skills to perform an effective digital forensics investigation. CHRI presents a methodological approach to computer forensics including searching and seizing, chain-of-custody, acquisition, preservation, analysis and reporting of digital evidence

What’s Included:

5 days of instructor-led in classroom training
Detailed Labs for hands-on learning experience; approximately 50% of training is dedicated to labs
Hundreds of investigation tools including EnCase, Access Data FTL, & ProDiscover
Huge cache of evidence files for analysis including RAW, .dd images, video & audio files, MS Office files, systems files, etc.
CHFI Courseware
Exam Voucher
CHFI onsite exam scheduling

Course Objectives:

Establish threat intelligence and key learning points to support pro-active profiling and scenario modeling
Perform anti-forensic methods detection
Perform post-intrusion analysis of electronic and digital media to determine the who, where, what, when, and how the intrusion occurred
Extract and analyze of logs from various devices like proxy, firewall, IPS, IDS, Desktop, laptop, servers, SIM tool, router firewall, switches AD server, DHCP logs, Access Control Logs & conclude as part of investigation process
Identify & check the possible source/ incident origin
Recover deleted files and partitions in Windows, MAC OS X, and Linux
Conduct reverse engineering for known and suspected malware files
Collect data using forensic technology methods in accordance with evidence handling procedures, including collection of hard copy and electronic documents

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

- Module 01. Computer Forensics in Today’s World
- Module 02. Computer Forensics Investigation Process
- Module 03. Understanding Hard Disks and File Systems
- Module 04. Data Acquisition and Duplication
- Module 05. Defeating Anti-forensics Techniques
- Module 06. Operating System Forensics (Windows, Mac, Linux)
- Module 07. Network Forensics
- Module 08. Investigating Web Attacks
- Module 09. Database Forensics
- Module 10. Cloud Forensics
- Module 10. Malware Forensics
- Module 11. Investigating Email Crimes
- Module 12. Investigating Email Crimes
- Module 13. Mobile Forensics
- Module 14. Forensics Report Writing and Presentation

Prerequisites:

- - 2+ years of proven information security work experience
  - Educational background with digital security specialization
Target Audience:
- - Law Enforcement
  - Defense & Military
  - E-Business Security
  - Systems Administrators
  - Legal Professionals
  - Banking & Insurance professionals
  - Government Agencies
  - IT Managers
Comments

Latest comments from students

Liked the class? Then let everyone know!

N-595: VoIP Security Analysis and Design

Course Overview:

As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications. In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP. Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations. Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny. Other protocols such as Nortel's UNIStim will be addressed. As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures. Various open source tools including those in BackTrack are used for VoIP attacks. A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.

Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

VoIP Architecture
VoIP Signaling and media protocols
Common VoIP authentication mechanisms
Common VoIP encryption techniques
VoIP protocol analysis with Wireshark
Maintaining QoS while mitigating DoS
VoXML, XML, and application integration security
Converged network security design and implementation
Impact of NAT and firewalls
SIP, H.323, and MGCP vulnerabilities
VPN, IPsec and SRTP to secure VoIP services
Penetration testing with open source tools
Attacks for Eavesdropping, call redirection, and DoS
Design of hacked firmware virtualization layer
Concise lockdown steps for network hardware and VoIP

Prerequisites:

This is an advanced Information Security Course which requires basic Windows & UNIX competency
Certification or 2 years of experience in these operating systems is highly recommended
As well as an understanding of TCP/IP

Comments

Latest comments from students