Course Overview:

Looking to move up in the information security field? If you have at least one year of security experience, you qualify for the Systems Security Certified Practitioner (SSCP) certification, which offers junior security professionals a way to validate their experience and demonstrate competence with (ISC²)®’s seven domains.

Attendees to TN-715: Systems Security Certified Practitioner (SSCP) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Access Controls
  • Security Operations and Administration
  • Analysis and Monitoring
  • Cryptography
  • Networks and Telecommunications
  • Malicious Code/Malware
  • Risk, Response, and Recovery

Prerequisites:

  • One year security experience
  • Some knowledge of the (ISC²)®’s seven domains

Comments

Latest comments from students


User: boyleb15

Instructor comments: Instructor was very knowledgeable on most items covered during this course. There were some topics he did lack the answer to. Instructor would also get sidetracked easily


User: keginth

Instructor comments: he was phenomenal with test prep and knew the book well

Facilities comments: adequate


Like the class?  Then let everyone know!

Course Overview:

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR).

Attendees to N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
  • Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
  • Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
  • Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
  • Optimize OSPFv2 and OSPFv3 behavior
  • Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
  • Implement route redistribution using filtering mechanisms
  • Troubleshoot redistribution
  • Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA)
  • Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
  • Optimize MP-BGP in IPv4 and IPv6 environments
  • Troubleshoot MP-BGP for IPv4 and IPv6
  • Describe the features of Multiprotocol Label Switching (MPLS)
  • Describe the major architectural components of an MPLS VPN
  • Identify the routing and packet forwarding functionalities for MPLS VPNs
  • Explain how packets are forwarded in an MPLS VPN environment
  • Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
  • Implement Dynamic Host Configuration Protocol (DHCP)
  • Describe the tools available to secure the IPV6 first hop
  • Troubleshoot Cisco router security features
  • Troubleshoot infrastructure security and services

Prerequisites:

 

Comments

Latest comments from students


Liked the class?  Then let everyone know!

Course Overview:

In this course students will learn to install the Linux™ operating system, to administer users and software, to use vi, basic Linux security, process control, file system maintenance, backup and recovery, including some basic networking concepts. This course insures that students have the skills to configure all desktop and client side related activity.

Attendees to L-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Linux operating system installation
  • Hardware Issues
  • LILO & GRUB Configuration
  • Managing the Linux file system
  • Boot Process
  • Customization of setup files
  • System Startup
  • Run Levels
  • Network Services
  • User Management
  • Changing Passwords
  • Monitoring, accessing & restricting root system access
  • Administration Tools
  • Disk Management
  • Quotas
  • Process Control
  • Installing & removing software & patches
  • Network Configuration
  • Client side components of NFS, Samba, NTP, NIS
  • Printing
  • Backup and Recovery
  • Using utilities for process control, locating files & automating maintenance tasks

Prerequisites:

  • Students should have an understanding of all basic UNIX commands as well as variable substitution, wild card expansion, command pipes, permissions, the grep  and find commands.
  • These prerequisites can be met through completion of TN-125: Introduction to UNIX & Linux and six month’s experience with Linux.

 

Comments

Latest comments from students


User: flores2015

Instructor comments: Very Good Instructor (Bill Peterson)

Facilities comments: Nice - Can't wait for your new facility.



Liked the class?  Then let everyone know!

Course Overview:

The System Administration I for Red Hat course is designed for IT professionals working to become full-time enterprise Linux system administrators. This course gives the student direct experience with the most essential system administration tasks in the Red Hat. You will be instructed in crucial system management skills including: configuring network interfaces, client set up of network protocols, managing local disk devices, installation, package management, performing system boot procedures, grub and controlling system processes.

Attendees to RH-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Installation
  • Manage File Systems and Local Disk Drives
  • Perform Mounts and Unmounts
  • Perform System Boot Procedures
  • Tuning and Maintaining the Kernel
  • Control System Processes
  • Perform User Administration
  • Installing and Managing Services
  • Perform Package Administration
  • Client Setup of SSH and Printing

Prerequisites:

Comments

Latest comments from students


User: mlspence

Instructor comments: Bill was awesome! He did a fantastic job teaching the course mater to everyone in the class. He made sure everyone was able to keep up and that they understood the material before moving on. Thanks!

Facilities comments: They were great as well



Liked the class?  Then let everyone know!

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!