N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Course Overview:

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.

Attendees to N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) will receive TechNow approved course materials, expert instruction, and prepare you to take the 350-401 Implementing Cisco® Enterprise Network Core Technologies (ENCOR) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
Troubleshoot Layer 2 connectivity using VLANs and trunking
Implementation of redundant switched networks using Spanning Tree Protocol
Troubleshooting link aggregation using Etherchannel
Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
Describe the virtualization technology of servers, switches, and the various network devices and components
Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
Describe wireless roaming and location services
Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-Shared Key (PSK) wireless client authentication on a WLC
Troubleshoot wireless client connectivity issues using various available tools
Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
Explain basic Python components and conditionals with script writing and analysis
Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
Describe APIs in Cisco DNA Center and vManage

Prerequisites:

CCNA certification
Implementation of Enterprise LAN networks
Basic understanding of Enterprise routing and wireless connectivity
Basic understanding of Python scripting

Comments

Latest comments from students

User: don.seguin

Instructor comments: Tim was a great.

Facilities comments: The classroom was great.

User: jrtrussell

Instructor comments: Awesome

Facilities comments: Great

Liked the class? Then let everyone know!

TN-929: Security Essentials Training Course

Course Overview:

What a great course that is slightly misnamed! This course may be labeled Security Essentials, but covers much of the subject matter of CISSP! This course does more than just cover the basics. TechNow takes the time to give the student hands on labs to exemplify an objective. Security Essentials Prep Training Course sets the foundation for your security career and sets the expectation of comprehension with more detail than Security+ and more on par with CISSP.

This course provides students skills to take courses that prepare for higher level certifications.

Attendees to TN-929: Security Essentials Training Course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

802.11 Suite of Protocols
Access Control Theory
Alternate Network Mapping Techniques
Authentication and Password Management
Contingency Planning
Crypto Concepts
Crypto Fundamentals
Defense-in-Depth
DNS
Firewall Subversion
Firewalls
HIDS Overview
Honeypots
ICMP
IDS Overview
Incident Handling Fundamentals
Information Warfare
Introduction to OPSEC
IP Packets
IPS Overview
IPv6
Legal Aspects of Incident Handling
Linux/Unix Configuration Fundamentals
Linux/Unix Logging and Log Management
Linux/Unix OS Security Tools and Utilities
Linux/Unix Overview
Linux/Unix Patch Management
Linux/Unix Process and Service Management
Mitnick-Shimomura
Network Addressing
Network Design
Network Hardware
Network Mapping and Scanning
Network Plumbing
Network Protocol
NIDS
OverviewPhysical Security
Policy Framework
Protecting Data at Rest
Public Key Infrastructure
PKI
Reading Packets
Risk Management
Safety Threats
Securing Windows Server Services
Steganography
OverviewTCPUDP
Virtual Machines
Virtual Private Networks VPNs
Viruses and Malicious Code
VoIP
Vulnerability Management Overview
Vulnerability Scanning
Web Application Security
Windows Auditing
Windows Automation and Configuration
Windows Family of Products
Windows Network Security Overview
Windows Permissions & User Rights
Windows Security Templates & Group Policy
Windows Service Packs, Hotfixes and Backups
Windows Workgroups, Active Directory and Group Policy Overview
Wireless Overview

Prerequisites:

Passed CompTIA Security+

Comments

Latest comments from students

User: sjsmith2262

Instructor comments: without question, Dave Askey knows his material!!! great instructor that gave a personalized approach.

Facilities comments: class was taught in a hotel reception area, very nice, quiet and convenient for all people

User: synistry

Instructor comments: Dave was great! (as always). Wealth of knowledge and a master at customizing course content to match the education level of his students. The class kept entirely in pace with where we were at as a group overall on a day to day basis.

Facilities comments: Facilities were overall really nice. The only complaint is that the hotel / conference center had us move rooms on one occasion, and kicked us out early on two others. I would assume this is due to the last minute location change, so I don't think there is anything anyone could have done better in the situation.

Liked the class? Then let everyone know!

TN-835: Certified in Risk and Information Systems Control (CRISC) Preparation Seminar

Course Overview:

Certified in Risk and Information Systems Control (CRISC), is for professionals responsible for an organization's risk management program. Students looking to acquire CRISC qualify themselves as IT security analyst, security engineer architect, information assurance program manager and senior IT auditor. CRISC certified professionals manage risk, design and oversee response measures, monitor systems for risk, and ensure the organization's risk management strategies are met.

The CRISC exam will primarily align with the terminology and concepts described in The Risk IT Framework, The Risk IT Practioner Guide, and COBIT 5. This will include applications in the evaluation and monitoring of IT-based risk, as well as the design and implementation of IS controls.

The CRISC exam covers four domains that are periodically updated to reflect the changing needs of the profession:

Domain 1: Risk Identification
Domain 2: Risk Assessment
Domain 3: Risk Response and Mitigation
Domain 4: Risk and Control Monitoring and Reporting

This course is designed to assist in your exam preparation for the CRISC exam.

Attendees to TN-835: Certified in Risk and Information Systems Control (CRISC) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Risk IT Framework—Purpose and Principles
Essentials of Risk Governance, Evaluation, and Response
Risk and Opportunity Management Using CobiT, Val IT and Risk IT
The Risk IT Framework Process Model Overview
Managing Risk in Practice—The Practitioner Guide Overview
Overview of the Risk IT Framework Process Model
The Risk IT Framework

Prerequisites:

A minimum of at least three (3) years of cumulative work experience performing the tasks of a CRISC professional across at least three (3) CRISC domains is required for certification. There are no substitutions or experience waivers.

Comments

Latest comments from students

User: tracycampbell

Instructor comments: Dave had great command of the class and the flow of information. The lessons seem relevant to the exam and the course material should assist greatly with passing. As a bonus, his breakdown of PKI helped with my current job requirements.

Facilities comments: The Home2Suites by Hilton was FANTASTIC!

Liked the class? Then let everyone know!

N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
02/10/2025 - 02/14/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
05/19/2025 - 05/23/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
08/11/2025 - 08/15/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
11/17/2025 - 11/21/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology, from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT). Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting. This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
Configure the Firepower Management Center (FMC)
Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
Describe the Cisco Firepower Systems infrastructure
Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
Describe the System Configuration and Health policies and implement them
Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
Describe, create, and implement objects for use in Access Control policies
Create DNS and URL policies and configure Sinkholes
Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
Describe advanced policy configuration and Firepower system configuration options
Configure Malware Policies to find and stop Malware
Understand Security Intelligence, and how to configure SI to stop attacks NOW!
Configure policies to find and stop Ransomware
Understand how to fine tune IPS policies
Understand how to find tun Snort Preprocessor policies (NAP)
Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
Analyze events
Create reporting templates and schedule them
Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
Set up external authentication for users using LDAP/Realms
Configuring system integration, realms, and identity sources
Configure FMC domains and implement them
Configure FTD HA with two FTD devices
SSL Policy – decrypt your traffic
AnyConnect and Site-to-Site VPN
Understand network and host based AMP. Configure and analyze host based AMP
Understand Cisco Identity Services Engine (ISE)
Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Cisco Certified Network Associate (CCNA) certification. or equivalent
Cisco Certified Network Associate Security (CCNA Security) certification. or equivalent
Working knowledge of the Microsoft Windows operating system.

Comments

Latest comments from students