PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week. We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

Module 0 – Introduction & Overview
Module 1 – Platforms and Architecture
- Single-Pass Architecture
- Flow Logic
Module 2 – Initial Configuration
- Initial Access to the System
- Configuration Management
- Licensing and Software Updates
- Account Administration
Mod 3: Basic Interface Configuration
- Security Zones
  Layer 2, Layer 3, Virtual Wire, and Tap
- Subinterfaces
- DHCP
- Virtual Routers
Mod 4: Security and NAT Policies
- Security Policy Configuration
- Policy Administration
- NAT (source and destination)

Day 2

Mod 5: Basic App-ID™
- App-ID Overview
- Application Groups and Filters
Mod 6: Basic Content-ID™
- Antivirus
- Anti-spyware
- Vulnerability
- URL Filtering
Mod 7: File Blocking and WildFire™
- File Blocking
- WildFire
Mod 8: Decryption
- Certificate Management
- Outbound SSL Decryption
- Inbound SSL Decryption

Day 3

Mod 9: Basic User-ID™
- Enumerating Users
- Mapping Users to IP Addresses
- User-ID Agent
Mod 10: Site-to-Site VPNs
- IPSec Tunnels
Mod 11: Management and Reporting
- Dashboard
- Basic Logging
- Basic Reports
- Panorama
Mod 12: Active/Passive High
- Availability
- Configuring Active/Passive HA

Prerequisites:

Security+, Network+, CCNA and networking experience is recommended.

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

L-245: Linux System Administration I

Course Overview:

In this course students will learn to install the Linux™ operating system, to administer users and software, to use vi, basic Linux security, process control, file system maintenance, backup and recovery, including some basic networking concepts. This course insures that students have the skills to configure all desktop and client side related activity.

Attendees to L-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Linux operating system installation
Hardware Issues
LILO & GRUB Configuration
Managing the Linux file system
Boot Process
Customization of setup files
System Startup
Run Levels
Network Services
User Management
Changing Passwords
Monitoring, accessing & restricting root system access
Administration Tools
Disk Management
Quotas
Process Control
Installing & removing software & patches
Network Configuration
Client side components of NFS, Samba, NTP, NIS
Printing
Backup and Recovery
Using utilities for process control, locating files & automating maintenance tasks

Prerequisites:

Students should have an understanding of all basic UNIX commands as well as variable substitution, wild card expansion, command pipes, permissions, the grep and find commands.
These prerequisites can be met through completion of TN-125: Introduction to UNIX & Linux and six month’s experience with Linux.

Comments

Latest comments from students

User: flores2015

Instructor comments: Very Good Instructor (Bill Peterson)

Facilities comments: Nice - Can't wait for your new facility.

Liked the class? Then let everyone know!

RH-245: Linux System Administration I

Course Overview:

The System Administration I for Red Hat course is designed for IT professionals working to become full-time enterprise Linux system administrators. This course gives the student direct experience with the most essential system administration tasks in the Red Hat. You will be instructed in crucial system management skills including: configuring network interfaces, client set up of network protocols, managing local disk devices, installation, package management, performing system boot procedures, grub and controlling system processes.

Attendees to RH-245: Linux System Administration I will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 days

Course Objectives:

Installation
Manage File Systems and Local Disk Drives
Perform Mounts and Unmounts
Perform System Boot Procedures
Tuning and Maintaining the Kernel
Control System Processes
Perform User Administration
Installing and Managing Services
Perform Package Administration
Client Setup of SSH and Printing

Prerequisites:

TN-125: Introduction to UNIX and Linux

Comments

Latest comments from students

User: mlspence

Instructor comments: Bill was awesome! He did a fantastic job teaching the course mater to everyone in the class. He made sure everyone was able to keep up and that they understood the material before moving on. Thanks!

Facilities comments: They were great as well

Liked the class? Then let everyone know!

CL-218: Introduction to Cloud Infrastructure and Operations Bootcamp

Course Overview:

This bootcamp is a customized course for Cloud Essentials+ and Cloud+ that leverages 8 days to provide greater value than just the delivery of two separate courses. The 8 days of instruction prepare the student for the CCSP course.

TechNow has Identified overlap and uses time saved to:

Introduce hands-on skills (Open Source and AWS)
Go more in-depth on theory using hands-on to reinforce concepts
Do exam prep with practice questions

This course covers the knowledge and skills required to understand standard Cloud terminologies/methodologies, to implement, maintain, and deliver cloud technologies and infrastructures (e.g. server, network, storage, and virtualization technologies), and to understand aspects of IT security and use of industry best practices related to cloud implementations and the application of virtualization.

This bootcamp helps prepare students for 2 certifications, CompTIA Clouds Essentials+ and CompTIA Cloud+. After this course students will also be prepared to continue their education by taking CL-315: CCSP – Certified Cloud Security Professional Preparation Seminar .

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

TechNow is a CompTIA partner and uses official CompTIA Cloud Essentials+ and CompTIA Cloud+ curriculum.

Attendees to CL-218: Introduction to Cloud Infrastructure and Operations Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 8 days

Course Objectives:

Learn the fundamental concepts of cloud computing
Learn the business aspects and impacts of cloud computing
Differentiate the types of cloud solutions and the adoptions measures for each
Identify the technical challenges and the mitigation measures involved in cloud computing
Identify the technical challenges and the mitigation measures involved in cloud computing
Identify the steps to successfully adopt cloud services
Identify the basic concepts of ITIL and describe how the ITIL framework is useful in the implementation of cloud computing in an organization
Identify the possible risks involved in cloud computing and the risk mitigation measures, and you will also identify the potential cost considerations for the implementation of cloud and its strategic benefits
Prepare to deploy cloud solutions
Deploy a pilot project
Test a pilot project deployment
Design a secure network for cloud deployment
Determine CPU and memory sizing for cloud deployments
Plan Identity and Access Management for cloud deployments
Analyze workload characteristics to ensure successful migration to the cloud
Secure systems to meet access requirements
Maintain cloud systems
Implement backup, restore, and business continuity measures
Analyze cloud systems for required performance
Analyze cloud systems for anomalies and growth forecasting
Troubleshoot deployment, capacity, automation, and orchestration issues
Troubleshoot connectivity issues
Troubleshoot security issues

Course Prerequisites:

Security+, Network+ or equivalent experience
Managing or administering at least one of UNIX, Windows, Databases, networking, or security

Comments

Latest comments from students