N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

Courses Similar to SANS

TechNow is in no way associated with SANS or GIAC, but has courses that are similar in subject matter:

RH-355: RHCSA Rapid Track Course

Course Overview:

The RHCSA Rapid Track Course is designed for experienced Linux® system administrators who want to expand their technical skill sets and become accredited with the Red Hat® Certified System Administration (RHCSA) certification. To successfully navigate this course, students should have experience with the Linux command line—including the necessary skills to execute common commands, such as cp, grep, sort, mkdir, tar, mkfs, ssh, and dnf—and be familiar with accessing man pages for help. At the completion of the course, students will be adequately prepared to take the RHCSA exam (EX200) .

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

Introduce Linux and the Red Hat Enterprise Linux ecosystem.
Run commands and view shell environments.
Manage, organize, and secure files.
Manage users, groups and user security policies.
Control and monitor systemd services.
Configure remote access using the web console and SSH.
Configure network interfaces and settings.
Manage software using DNF
Access security files, file systems, and networks
Execute shell scripting and automation techniques
Manage storage devices, logical volumes, and file systems
Manage security and system access
Control the boot process and system services
Running containers

Prerequisites:

Experience in the field system administration.

Comments

Latest comments from students

Liked the class? Then let everyone know!

CT-405: PenTest+

Course Overview:

PenTest+ is an intermediate-level certification for cybersecurity professionals who are tasked with penetration testing to identify, exploit, report, and manage vulnerabilities on a network. PenTest+ is at the same certification level as CT-395: CySA+. Depending on your course of study, PenTest+ and CySA+ can be taken in any order, but typically follow the skills learned in CT-325: Security+. PenTest+ focuses on offense through penetration testing and vulnerability assessment while CySA+ focuses on defense through incident detection and response. The most qualified cybersecurity professionals have both offensive and defensive skills. Attend Tech Now training for hands-on, instructor led course to prepare you for the CompTIA PT0-002 exam. This exam is hands-on, performance-based questions and multiple choice, to ensure each candidate possesses the skills, knowledge, and ability to perform tasks on systems.

What’s Included:

5 days of instructor led in classroom training
Labs
PenTest+ Courseware
Exam Voucher
PenTest+ onsite exam scheduling

Course Objectives:

Plan and scope penetration tests
Conduct passive reconnaissance
Perform non-technical tests to gather information
Conduct active reconnaissance
Analyze vulnerabilities
Penetrate networks
Exploit host-based vulnerabilities
Test application
Complete post-exploit tasks
Analyze and report pen test results

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

- Module 01. Planning and Scoping Penetration Tests
- Module 02. Conducting Passive Reconnaissance
- Module 03. Performing Non-Technical Tests
- Module 04. Conducting Active Reconnaissance
- Module 05. Analyzing Vulnerabilities
- Module 06. Penetrating Networks
- Module 07. Exploiting Host-Based Vulnerabilities
- Module 08. Testing Applications
- Module 09. Completing Post-Exploit Tasks
- Module 10. Analyzing and Reporting Pen Test Results

Prerequisites:

- - CT-225: Network+
  - CT-325: Security+
  - 3-4 years of hands-on information security or related experience

Target Audience:

This course is designed for cybersecurity professionals tasked with penetration testing and vulnerability management.