Course Overview:

This course is instructed with an instructor in the classroom with provided lab equipment and Cyber Range.

Students enrolled in the Certified Network Defender course, will gain a detailed understanding and hands on ability to function in real life situations involving network defense. They will gain the technical depth required to actively design a secure network in your organization. This program will be akin to learning math instead of just using a calculator.

This course gives you the fundamental understanding of the true construct of data transfer, network technologies, software technologies so that you understand how networks operate, understand what software is automating and how to analyze the subject material.

You will learn how to protect, detect and respond to, and predict threats on the network.  This builds upon the typical knowledge and skills of Network Administrators in network components, traffic, performance and utilization, network topology, system locations, and security policies.

You will learn network defense fundamentals, the application of network security controls, protocols, perimeter appliances, secure IDS, VPN and firewall configuration. You will then learn the intricacies of network traffic signature, analysis and vulnerability scanning which will help you when you design greater network security policies and successful incident response plans. These skills will help you foster resiliency and continuity of operations during attacks.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

 

What’s Included:

  • EC-Council official E-Courseware
  • EC-Council iLabs access included for 6 months
  • EC-Council official Certificate of Attendance
  • CND Exam Voucher with 1 FREE RETAKE VOUCHER

 

Security Course Flow
Document Flow Chart iconsm

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

  • Module 01. Network and Defense Strategies
  • Module 02. Administrative Network Security
  • Module 03. Technical Network Security
  • Module 04. Network Perimeter Security
  • Module 05. Endpoint Security-Windows Systems
  • Module 06. Endpoint Security- Linux Systems
  • Module 07. Endpoint Security- Mobile Devices
  • Module 08. Endpoint Security- IoT Devices
  • Module 09. Administrative Application Security
  • Module 10. Data Security
  • Module 11. Enterprise Virtual Network Security
  • Module 12. Enterprise Cloud Network Security
  • Module 13. Enterprise Wireless Network Security
  • Module 14. Network Traffic Monitoring and Analysis
  • Module 15. Network Logs Monitoring and Analysis
  • Module 16. Incident Response and Forensic Investigation
  • Module 17. Business Continuity and Disaster Recovery
  • Module 18. Risk Anticipation with Risk Management
  • Module 19. Threat Assessment with Attack Surface Analysis
  • Module 20. Threat Prediction with Cyber Threat Intelligence

 

Prerequisites:

  • Basic network and host operations knowledge
  • Experience commensurate with one to five years of network, host, or application administration
  • TN-325:Security+   or equivalent

 

Courses to follow:

 

Target Audience:

Network Administrators, Network Security Administrators, Network Security Engineer, Network Defense Technicians, Network Analyst, Security Analyst, Security Operator, and anyone involved in network operations

 

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students


Liked the class?  Then let everyone know!

Course Overview:

This CEH course will immerse you into a “Hacker Mindset” in order to teach you how to think like a hacker and better defend against future attacks. Students are in the driver’s seat with a hands-on training environment employing a systematic ethical hacking process. All while teaching students how to scan, test, hack, and secure target systems. CEH shows how hackers think and act maliciously so you can learn to better position your organization’s security infrastructure and defend against future attacks.

This CEH course covers the Five Phases of Ethical Hacking, diving into Reconnaissance, Gaining Access, Enumeration, Maintaining Access, and covering your tracks.

This CEH course delivers in-demand ethical hacking skills while preparing you for the internationally-recognized Certified Ethical Hacker (CEH) certification exam (312-50) from EC-Council.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

What’s Included:

  • EC-Council official E-Courseware
  • EC-Council official iLabs code with access for 6 months
  • EC-Council official Certificate of Attendance
  • CEH Exam Voucher

 

Security Course Flow
Document Flow Chart iconsm

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

  • Module 01. Introduction to Ethical Hacking
  • Module 02. Foot-printing and Reconnaissance
  • Module 03. Scanning Networks
  • Module 04. Enumeration
  • Module 05. Vulnerable Analysis
  • Module 06. System Hacking
  • Module 07. Malware Threats
  • Module 08. Sniffing
  • Module 09. Social Engineering
  • Module 10. Denial-of-Service
  • Module 11. Session Hijacking
  • Module 12. Evading IDS,Firewalls, and Honeypots
  • Module 13. Hacking Web Servers
  • Module 14. Hacking Web Applications
  • Module 15. SQL Injection
  • Module 16. Hacking Wireless Networks
  • Module 17. Hacking Mobile Platforms
  • Module 18. IoT and OT Hacking
  • Module 19. Cloud Computing
  • Module 20. Cryptography

 

Prerequisites:

  • Windows operating system and/or Linux operating system or other Unix-based OS
  • TCP/IP protocols and implementation
  • At least 2 years of IT security experience
  • TN-325:Security+

Target Audience:

Information Security Analyst/Administrator, Information Assurance (IA) Security Officer, Information Security Manager/Specialist, Auditors, Security Professional, Site Admins, Penetration Testers, Red Team,Risk/Threat/Vulnerability Analyst, Individuals concerned about the integrity of network infrastructure

 

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students


Liked the class?  Then let everyone know!

Course Overview:

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.

Attendees to N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) will receive TechNow approved course materials, expert instruction, and prepare you to take the 350-401 Implementing Cisco® Enterprise Network Core Technologies (ENCOR) exam.

Document Flow Chart iconsm

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
  • Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
  • Troubleshoot Layer 2 connectivity using VLANs and trunking
  • Implementation of redundant switched networks using Spanning Tree Protocol
  • Troubleshooting link aggregation using Etherchannel
  • Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
  • Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
  • Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
  • Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
  • Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
  • Describe the virtualization technology of servers, switches, and the various network devices and components
  • Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
  • Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
  • Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
  • Describe wireless roaming and location services
  • Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
  • Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-Shared Key (PSK) wireless client authentication on a WLC
  • Troubleshoot wireless client connectivity issues using various available tools
  • Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
  • Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
  • Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
  • Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
  • Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
  • Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
  • Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
  • Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
  • Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
  • Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
  • Explain basic Python components and conditionals with script writing and analysis
  • Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
  • Describe APIs in Cisco DNA Center and vManage

Prerequisites:

  • CCNA certification
  • Implementation of Enterprise LAN networks
  • Basic understanding of Enterprise routing and wireless connectivity
  • Basic understanding of Python scripting

 

Comments

Latest comments from students


User: don.seguin

Instructor comments: Tim was a great.

Facilities comments: The classroom was great.


User: jrtrussell

Instructor comments: Awesome

Facilities comments: Great


Liked the class?  Then let everyone know!

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology,  from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT).  Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting.  This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
  • Configure the Firepower Management Center (FMC)
  • Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
  • Describe the Cisco Firepower Systems infrastructure
  • Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
  • Describe the System Configuration and Health policies and implement them
  • Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
  • Describe, create, and implement objects for use in Access Control policies
  • Create DNS and URL policies and configure Sinkholes
  • Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
  • Describe advanced policy configuration and Firepower system configuration options
  • Configure Malware Policies to find and stop Malware
  • Understand Security Intelligence, and how to configure SI to stop attacks NOW!
  • Configure policies to find and stop Ransomware
  • Understand how to fine tune IPS policies
  • Understand how to find tun Snort Preprocessor policies (NAP)
  • Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
  • Analyze events
  • Create reporting templates and schedule them
  • Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
  • Set up external authentication for users using LDAP/Realms
  • Configuring system integration, realms, and identity sources
  • Configure FMC domains and implement them
  • Configure FTD HA with two FTD devices
  • SSL Policy – decrypt your traffic
  • AnyConnect and Site-to-Site VPN
  • Understand network and host based AMP.  Configure and analyze host based AMP
  • Understand Cisco Identity Services Engine (ISE)
  • Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Comments

Latest comments from students


Liked the class?  Then let everyone know!

 

Course Overview:

TN-225: Network+ Skills Class is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client. 

Attendees to the TN-225: Network+ Skills Class will receive TechNow approved course materials and expert instruction.

Please Note:  This course is designed with a focus on skills and is not a preparation course for certification.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

  • Introduction Defining Networking
  • Building a Network with OSI
  • Hardware Concepts
  • Ethernet Basics
  • Modern Ethernet
  • Non-Ethernet Networks
  • Installing a Physical Network
  • Wireless Networking
  • Protocols
  • TCP/IP
  • Network Operating Systems
  • Sharing Resources
  • Going Large with TCP/IP
  • TCP/IP & the Internet
  • Remote Connectivity
  • Protecting Your Network
  • Interconnecting Network Operating Systems
  • The Perfect Server
  • Zen & the Art of Network Support

Prerequisites:

Comments

Latest comments from students


User: dsm

Instructor comments: great presentation

Facilities comments: too cold


User: fillyok

Instructor comments: He has an excellent way of explaining things on the level that anyone can understand easily. I wasn't looking forward to this class at all but I'm really glad I attended now. I have a much clearer understanding of networking fundamentals that I never would've received via CBTs. I'd heard really good things about Tim Burkard's teaching skills and now I know they're true. I wouldn't mind taking other classes that he teaches,

Facilities comments: The facilities are really nice and there weren't any problems as far as I could tell. The hotel staff is very nice.


 

Like the class?  Then let everyone know!