PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

Trademark Recognition

(ISC)², CBK, and CISSP are registered marks of the International Information Systems Security Certification Consortium in the United States and other countries.

Access, Excel, Hyper-V, Outlook, Microsoft, SharePoint, Silverlight, SQL Server, Visual Basic, Win32, Windows, Windows PowerShell and Windows Server are registered trademarks of Microsoft Corporation.

Adobe, Acrobat, Flash and Photoshop are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries

Amazon Web Services is a trademark of Amazon.com, Inc.

Android is a trademark of Google Inc.

APMG-International Change Management, The APMG-International Change Management and Swirl Device logo, APMG-International AgilePM and The APMG-International AgilePM and Swirl Device logo are trademarks of The APM Group Limited.

Certified Ethical Hacker (CEH) is a registered trademark of EC-Council.

Cisco is a registered trademark of Cisco Systems Inc.

CMMI® is registered in the U.S. Patent and Trademark Office by Carnegie Mellon University.

IIBA®, the IIBA® logo, BABOK® and Business Analysis Body of Knowledge® are registered trademarks owned by International Institute of Business Analysis. These trademarks are used with express permission of International Institute of Business Analysis.

CAPM, Certified Associate in Project Management (CAPM), PMP, Project Management Professional (PMP), PMI-ACP, PMI Agile Certified Practitioner (PMI-ACP), PMBOK, and the R.E.P. Logo are marks of Project Management Institute, Inc.

CBAP® and CCBA® are registered certification marks owned by International Institute of Business Analysis. These trademarks are used with express permission of International Institute of Business Analysis.

Certified Business Analysis Professional, Certification of Competency in Business Analysis, Endorsed Education Provider, EEP and the EEP logo are trademarks owned by International Institute of Business Analysis. These trademarks are used with express permission of International Institute of Business Analysis.

COBIT is a trademark of ISACA, registered in the U.S. and other countries.

COBIT® 5 is a trademark of the Information Systems Audit and Control Association® (ISACA®). This product includes COBIT® 5, used by permission of ISACA®. 2012© ISACA®. All rights reserved.

CompTIA A+ and CompTIA Network+ are registered trademarks of the Computing Technology Industry Association, Inc.

CompTIA CASP and CompTIA Cloud Essentials are trademarks of the Computing Technology Industry Association, Inc.

GIAC and associated certifications:  GSEC, GPEN, GXPN, GCFW, GCUX, GCWN, GCIA, GREM are registered trademarks of the SANS Institute

Hadoop is a registered trademark of the Apache Software Foundation.

Hibernate is a registered trademark and servicemark of Red Hat, Inc.

iPad, iPhone, Mac and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.

ITIL®, PRINCE2® and MSP® are registered trademarks of AXELOS Limited.

JavaScript, JavaServer, JavaServer Pages, Enterprise JavaBeans, MySQL and PL/SQL are trademarks of Oracle Corporation.

Linux is a registered trademark of Linus Torvalds.

Java and Oracle are registered trademarks of Oracle Corporation.

 Palo Alto Networks, PAN-OS, App-ID, Content-ID, Url-ID, GlobalProtect, Wildfire, and Panorama are trademarks of Palo Alto Networks, Inc.

"Python" is a registered trademark of the Python Software Foundation, used by Learning Tree International with permission from the Foundation.

Red Hat and Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. in the United States and other countries.

Red Hat Middleware, LLC. All rights reserved.

SANS and associated certifications:  GSEC, GPEN, GXPN, GCFW, GCUX, GCWN, GCIA, GREM are registered trademarks of the SANS Institute

SAP Crystal Reports is the registered trademark of SAP AG in Germany and in several other countries.

Scrum Alliance REPSM is a service mark of Scrum Alliance, Inc. Any unauthorized use is strictly prohibited.

TechNow® is a registered trademark of TechNow Incorporated.

The CompTIA Authorized Quality Curriculum logo is a proprietary trademark of CompTIA. All rights reserved.

The Swirl logo™ is a trademark of AXELOS Limited.

Transact-SQL is a trademark of Sybase, Inc.

UNIX is a registered trademark of The Open Group.

VMware is a registered trademark of VMware, Inc. in the United States and/or other jurisdictions.

XML is a trademark of MIT, INRIA or Keio on behalf of the World Wide Web Consortium.

in   

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-515: Implementing Cybersecurity and Information Assurance Methodologies

  

Course Overview: 

Learn to protect yourself and your company against hackers, by learning their tools and techniques, and then testing your network.  This course is heavily based on Kali and primarily on Metasploit.  In TN-515: Implementing Cybersecurity and Information Assurance Methodologies class you will learn the step by step process that hackers use to assess your enterprise network, probe it & hack into it, utilizing a mixed-platform target environment including Windows, Linux, Solaris, and Cisco.  This course is 90% hacking, but  defenses for demonstrated hacks will be discussed.  If you want to know the ins and outs of the hacks presented in this course, then this is the course for you.

Attendees to TN-515: Implementing Cybersecurity and Information Assurance Methodologies Class Attendees will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introduction to Pen Testing using the PTES model
  • Metasploit Basics
    • MSFconsole, MSFcli, Armitage, MSFpayload, MSFencode, NasmShell
  • Intelligence Gathering
    • Nmap, Databases in Metasploit, Port Scanning with Metasploit
  • Quick Intro to Ruby
    • Writing a simple Ruby script to create a custom scanner
  • Vulnerability Scanning
    • Importing Nessus Results
    • Scanning with Nessus from Within Metasploit
  • Exploitation
    • Using the Metasploit Framework and console to exploit
  • Meterpreter
    • Compromising a Windows System
    • Attacking MS SQL, xp_cmdshell
    • Dumping Usernames and Passwords, extracting and dumping hashes
    • Pass the Hash and Token Impersonation
    • Pivoting
    • Railgun
    • Using Meterpreter Scripts: Migrating a process, Killing AV, Persistence
  • Avoiding Detection
    • Creating Stand-Alone Binaries with MSFpayload
    • Encoding with MSFencode and Packers (go Green Bay:)
  • Exploitation Using Client Side Attacks
    • Introduction to Immunity Debugger
    • Using Immunity Debugger to Decipher NOP Shellcode
  • Metasploit Auxiliary Modules
  • Social Engineer Toolkit (SET)
    • Spear-Phishing, Web Attack
    • Creating a Multipronged Attack
  • Creating Your Own Module
    • Adapt an existing Module
    • Add some PowerShell and Run the Exploit
  • Meterpreter Scripting
  • Capture The Flag Exercise

Prerequisites:

  • This is an advanced  Cybersecurity and Information Assurance Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • An understanding of TCP/IP

Comments

Latest comments from students

  

Liked the class?  Then let everyone know!

TN-855: Advanced and In-Depth ICD 503 RMF, Controls, and Assessments

Course Overview:

This course is very hands-on with respect to SP 800-53 controls as related to ICD-503, leveraging experience with DCD 6/3, and incorporating a broad array of technologies found in the field.  Assessors and Auditors have to face many technologies that are not part of the main stream.  TechNow has gone to great efforts to build a very broad, comprehensive, and complex lab to simulate many scenarios and architectures.  Technologies such as a network appliance that is not a typical infrastructure product, a radio/satellite communications device, or many other technologies that build up a weapon system.  Students learn how controls are integrated into many different devices and how they fit in the overall security architecture of monitoring, reporting, and compliance testing.

Directly discussed are overlays for different requirements i.e.: tactical, medical, network type: JWICS, SIPR; IC or AF.  TechNow has developed a funnel concept to overlays to exemplify the encapsulation of a control within different requirements.  TechNow has over 15 years experience in Trusted Solaris/Trusted Extensions and labeled security.  Cross Domain overlays are presented that fits the work flow of an assesor.  PII overlays and any overlays that an organization uses and can be made available are also presented.  

This course allows the student to leverage years of experience in DoD DCD 6/34 for transition to the Risk Management Framework (RMF) applied to the Intelligence Community as mandated by ICD 503.  Utilizing NIST SP 800-37 to establish a baseline of RMF knowledge, the student learns how to integrate the NIST pubs to provide cohesive information assurance architectures and compliance.  ICD 503 scorecard evaluations are integral in demonstrating a successful ICD 503 compliance program.  TechNow's ICD 503 course provides students with the skill to assess security programs and evaluate ICD 503 compliance to build an improvement and sustainable program for score consistency.  TechNow's instructors have unparralleled expertise in federal compliance initiatives, and we bring this expertise instructing students on the complete life cycle of RMF.

More than a simple checklist, we instruct students not only how to validate essential security controls, programs, and metrics, but that they are operating effectively.  The student leaves the course knowing how to: identify gaps where controls, programs, or metrics are incomplete, missing or ineffective, and provide actionable findings and recommend remediation strategies.  Students learn to internalize NIST pubs to meaningul and effective IA guidelines and work with the Body of Evidence templates which include: Risk Assessment Report (RAR), Systems Security Plan (SSP), Security Assessment Report (SAR), and Plans of Action and Milestone (POAM).

TechNow training materials are aligned with the most recent set of National Institute of Standards and Technology (NIST), Committee on National Security Systems (CNSS), and Office of the Director of National Intelligence (ODNI) policies standards, processes, policies and instructions to be addressed/explained include ICD 503, ICS 503-1, ICS 500-16, ICS 500-18, ICS 500-27, ICD 502, NIST SP 800-37, NIST SP 800-30, NIST SP 800-53, NIST SP 800-53A, NIST SP 800-137, NIST SP 800-47, CNSSP 22, CNSSI 1253, and CNSSI 4009.

A majority of time is spent on in-depth compliance review of NIST SP 800-53 controls.  Instruction discusses which method should be used to test and validate each security control and what evidence should be gathered.  This course is not theory or death by power point.  Real scenarios are presented as exercises.  A complete live cyber range simulating the IC is utilized for hands-on labs for techniques of validating and documenting compliance of NIST SP 800-53 controls as related to ICD 503.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Establish a baseline of RMF knowledge
  • Validate essential security controls, programs, and metrics
  • DoD DCD 6/3 to ICD 503 Transition
  • Lab Environtment and the Cyber Range
  • Overlays: Tactical, Medical, Network type(JWICS, SIPR; IC or AF), Cross Domain, PII
  • Risk Assessment Report (RAR)
  • Systems Security Plan (SSP)
  • Security Assessment Report (SAR)
  • Plans of Action and Milestone (POAM)

Prerequisites:

Experience in the field of auditing and assesments.

Comments

Latest comments from students

Liked the class?  Then let everyone know!