PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

L-295: Linux System Administration II

Course Overview:

In this course students will learn to configure the Linux kernel, install & configure modules, to install and configure non-default devices and automate installation with Kickstart. Students also utilize skills developed in L-245 to expand on file system configuration with spanning devices and RAID. This is the foremost server side Linux course in the industry covering all server side components such as DHCP, Samba, NIS, LDAP, inet, telnet ftp, dns, etc.  Expanding on security introduced in L-245: Linux System Administration I, TCP wrappers, firewalling with IP filters, SQUID, & ssh are covered.

Attendees to L-295: Linux System Administration II will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Custom installation of a Linux server
  • Linux device naming conventions & the boot process
  • Adding peripheral devices
  • Reconfiguring the kernel
  • Disk partitioning & formatting
  • Changing system run levels
  • Adding startup files for additional services
  • Adding & removing software packages
  • Disk & file system Administration
  • Terminals & modem configuration
  • Configuring NFS to support the client/server environment
  • Use the automounter
  • Server side components such as DHCP, Samba, NIS, LDAP, inet, telnet, ftp, DNS, etc.
  • Troubleshooting techniques
  • Advanced Linux installation

Prerequisites:

Comments

Latest comments from students

Liked the class?  Then let everyone know!

Test2

  

http://technow.www162-254-253-232.a2hosted.com/palo-alto-firewall-essentials-fasttrack-training-class-course-pa-215/

  

Course Overview:

PA-215: Palo Alto Networks Firewall Essentials FastTrack Training Class is a five-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-222: Palo Alto Networks Panorama Essentials.

The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, Cisco, Unix, and Windows certifications.

Attendees to the PA-215:  Palo Alto Firewall Essentials FastTrack Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:  

Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).  

  • Day 1
    • Module 0 – Introduction & Overview
    • Module 1 – Administration & Management
      • Configuration Management
      • PAN-OS & Software Updates
      • Service Route Configuration
      • Log Forwarding
      • GUI, CLI, and API
    • Module 2 – Interface Configuration
      • L2 & L3
      • Vwire
      • Tap
      • Interface Management in Security Zones
      • VLANs
      • QoS
  • Day 2
    • Module 3 – Layer 3 Configuration
      • L3 Configuration and DHCP
      • NAT
      • DNS Proxy
      • Policy Based Forwarding in
      • Introduction to IPv6
    • Module 4 – App-ID
      • App-ID Process
      • Policy Administration
    • Module 5 – Content-ID
      • Antivirus
      • Anti-spyware
      • Vulnerability
      • URL Filtering
      • File Blocking and Wildfire
      • Data Filtering
      • DoS Protection
      • Botnet
  • Day 3
    • Module 6 – VM Firewall
      • Downlaod VM Template
      • Configure ESXi
      • Configure VM
    • Module 7 – Decryption
      • SSL Inbound and Outbound
    • Module 8 – Custom Signatures
      • Defining New Application Signatures
      • Application Override
      • Custom Threat ID
  • Day 4
    • Module 9 – User-ID
      • User-ID Agent
      • Terminal Server Agent
      • XML API
      • Captive Portal
    • Module 10 – VPN and GlobalProtect
      • Psec Tunnels
      • GlobalProtect
      • Agent
      • Portal
      • Gateway
      • HIP
  • Day 5
    • Module 11 – High Availability
      • Active/Passive
      • Active/Active
    • Module 12 – Panorama
      • Device Groups & Objects
      • Shared Policy
      • Configuration Management
      • Reporting

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

  

Like the class?  Then let everyone know!

N-325: Implementing Cisco IOS Network Security (IINS)

Course Overview:

Implementing Cisco IOS Network Security (IINS) is an instructor-led course. This five-day course focuses on the necessity of a comprehensive security policy and how it affects the posture of the network.  TechNow students each get a Cisco Switch, Router, and an ASA.  The in the classrom hardware hands-on component of this course is a priority.  Using instructor-led discussions, extensive hands-on lab exercises, and supplemental materials, this course allows learners to understand common security concepts, and deploy basic security techniques utilizing a variety of popular security appliances within a “real-life” network infrastructure.  TechNow is an Authorized VUE testing partner and this course concludes with the student taking the 210-260 IINS Cisco Certification Exam.

Duration: 5 days
Audience:  Cisco Network Administrators.  This course is an excellent precursor to Palo Alto Network Firewall Training
DoD 8140:  Not Mandated
Course Prerequisites:  CCNA

Course Objectives:

  • Describe common network security concepts
  • Secure routing and switching infrastructure
  • Deploy basic authentication, authorization and accounting services
  • Deploy basic firewalling services
  • Deploy basic site-to-site and remote access VPN services
  • Describe the use of more advanced security services such as intrusion protection, content security and identity management

Attendees to N-325: Implementing Cisco IOS Network Security will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Comments

Latest comments from students

Liked the class?  Then let everyone know!

AZ-500: Microsoft Azure Security Technologies

 

Course Overview:

Gain the knowledge and skills needed to implement security controls, maintain the security posture, and identify and remediate vulnerabilities by using a variety of security tools. The course covers scripting and automation, virtualization, and cloud N-tier architecture.

After completing this course, students will be able to describe specialized data classifications on Azure, Identify Azure data protection mechanisms, Implement Azure data encryption methods, Secure internet protocols and how to implement them on Azure, Describe Azure security services and features.

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

Attendees to AZ-500: Microsoft Azure Security Technologies will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Outline:

  • Identity and access
    • Configure Azure Active Directory for Azure workloads and subscriptions
    • Configure Azure AD Privileged Identity Management
    • Configure security for an Azure subscription
  • Platform Protection
    • Understand cloud security
    • Build a network
    • Secure network
    • Implement host security
    • Implement platform security
    • Implement subscription security
  • Security Operations
    • Configure security services
    • Configure security policies by using Azure Security Center
    • Manage security alerts
    • Respond to and remediate security issues
    • Create security baselines
  • Data and Applications
    • Configure security policies to manage data
    • Configure security for data infrastructure
    • Configure encryption for data at rest
    • Understand application security
    • Implement security for application lifecycle
    • Secure applications
    • Configure and manage Azure Key Vault

Prerequisites :

      • AZ-900: Microsoft Azure Fundamentals
      • Students should have 1-2 years professional development experience and experience with Microsoft Azure.
      • Student must be able to program in an Azure Supported Language.

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!