Here are the General Unix course offerings:
Course Overview:
This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security. TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.
Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.
Dates/Locations:
No Events
Duration: 5 Days
Course Objectives:
- Radio Frequency (RF) Fundamentals
- Spread Spectrum Technologies
- 802.11 Network Architecture
- Physical & MAC Layers
- Hardware Installation, Configuration, & Management
- Antennas & Accessories
- Wireless Network Management
- Troubleshooting Wireless LANs
- Site Surveying
- Wireless LAN Security
- Organizations & Standards
Prerequisites:
Attendees should have network administration skills. These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.
Comments
Latest comments from students
User: TMPRIESTLEY
Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!
Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.
Liked the class? Then let everyone know!
Course Overview: PA-243: Palo Alto Networks Firewall Debug and Troubleshoot is a three-day course on how to troubleshoot the full line of Palo Alto Networks next-generation firewalls. Students will receive hands-on experience troubleshooting the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks PAN-OS® operating system. Upon completion of this class, students will have an in-depth knowledge of how to troubleshoot visibility and control over applications, users, and content. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.
Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.
The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.
Attendees to the PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311) Training Course will receive TechNow approved course materials and expert instruction.
Dates/Locations: No Events
Duration: 3 days
Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).
Day 1
|
Day 2
|
Day 3
|
Prerequisites:
This course is in no way associated with Palo Alto Networks, Inc.
Comments
Latest comments from students
Like the class? Then let everyone know!
Course Overview:
TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.
This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.
Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.
Date/Locations:
| Date/Time | Event |
|---|---|
|
02/10/2025 - 02/14/2025 08:00 -16:00 |
N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX |
|
05/19/2025 - 05/23/2025 08:00 -16:00 |
N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX |
|
08/11/2025 - 08/15/2025 08:00 -16:00 |
N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX |
|
11/17/2025 - 11/21/2025 08:00 -16:00 |
N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX |
Duration: 5 days
Course Objectives:
-
- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices
Lab Objectives:
-
-
- Get started with Cisco Command-Line Interface (CLI)
- Observe How a Switch Operates
- Perform Basic Switch Configuration
- Implement the Initial Switch Configuration
- Inspect TCP/IP Applications
- Configure an Interface on a Cisco Router
- Configure and Verify Layer 2 Discovery Protocols
- Implement an Initial Router Configuration
- Configure Default Gateway
- Explore Packet Forwarding
- Troubleshoot switch Media and Port Issues
- Troubleshoot Port Duplex Issues
- Configure Basic IPv6 Connectivity
- Configure and Verify IPv4 Static Routes
- Configure Iv6 Static Routes
- Implement IPv4 Static Routing
- Implement IPv6 Static Routing
- Configure VLAN and Trunk
- Troubleshoot VLANs and Trunk
- Configure a Router on a Stick
- Implement Multiple VLANs and Basic Routing Between the VLANs
- Configure and Verify Single-Area OSPF
- Configure and Verify EtherChannel
- Improve Redundant Switched Topologies with EtherChannel
- Configure and Verify IPv4 ACLs
- Implement Numbered and Named IPv4 ACLs
- Configure a Provider-Assigned IPv4 Address
- Configure Static NAT
- Configure Dynamic NAT and Port Address Translation (PAT)
- Implement PAT
- Log into the WLC
- Monitor the WLC
- Configure a Dynamic (VLAN) Interface
- Configure a DHCP Scope
- Configure a WLAN
- Define a Remote Access Dial-In User Service (RADIUS) Server
- Explore Management Options
- Explore the Cisco DNA Center
- Configure and Verify NTP
- Configure System Message Logging
- Create the Cisco IOS Image Backup
- Upgrade Cisco IOS Image
- Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
- Secure Console and Remote Access
- Enable and Limit Remote Access Connectivity
- Secure Device Administrative Access
- Configure and Verify Port Security
- Implement Device Hardening
-
Prerequisites:
-
-
- Familiarity in the following networking topics:
- TCP/IP
- IP Configuration
- Peer-to-Peer Networking
- Subnetting
- Building a Routing Table
- It is not required but highly recommended to have the following certifications:
- Familiarity in the following networking topics:
-
Comments
Latest comments from students
User: dverzone
Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.
Facilities comments: Facilities were good, but a little crowded.
User: Trietdacvuong
Instructor comments: No Comments
Facilities comments: No comments
Liked the class? Then let everyone know!
Course Overview:
An in-depth course on how to use and configure Cisco Firepower Threat Defense technology, from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT). Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting. This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.
It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.
Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.
Date/Locations:
No Events
Duration: 5 days
Course Objectives:
- Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
- Configure the Firepower Management Center (FMC)
- Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
- Describe the Cisco Firepower Systems infrastructure
- Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
- Describe the System Configuration and Health policies and implement them
- Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
- Describe, create, and implement objects for use in Access Control policies
- Create DNS and URL policies and configure Sinkholes
- Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
- Describe advanced policy configuration and Firepower system configuration options
- Configure Malware Policies to find and stop Malware
- Understand Security Intelligence, and how to configure SI to stop attacks NOW!
- Configure policies to find and stop Ransomware
- Understand how to fine tune IPS policies
- Understand how to find tun Snort Preprocessor policies (NAP)
- Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
- Analyze events
- Create reporting templates and schedule them
- Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
- Set up external authentication for users using LDAP/Realms
- Configuring system integration, realms, and identity sources
- Configure FMC domains and implement them
- Configure FTD HA with two FTD devices
- SSL Policy – decrypt your traffic
- AnyConnect and Site-to-Site VPN
- Understand network and host based AMP. Configure and analyze host based AMP
- Understand Cisco Identity Services Engine (ISE)
- Configure ISE and integrate with Cisco FMC identity policy using PxGrid
Prerequisites:
- Cisco Certified Network Associate (CCNA) certification. or equivalent
- Cisco Certified Network Associate Security (CCNA Security) certification. or equivalent
- Working knowledge of the Microsoft Windows operating system.
Comments
Latest comments from students
Liked the class? Then let everyone know!