PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-919: Penetration Tester Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

Attendees to TN-919:Penetration Tester course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

  • Advanced Hash Manipulation
  • Command Shell vs. Terminal Access
  • Enumerating Users
  • Exploitation Fundamentals
  • Injection Attacks
  • Legal Issues
  • Metasploit
  • Moving Files with Exploits
  • Obtaining and Passing Password Representations
  • Overview of Passwords
  • Penetration Testing Foundations
  • Penetration Testing Process
  • Penetration Testing via the Command Line
  • Profiling the Target
  • Reconnaissance
  • Scanning for Targets
  • Using a Proxy to Attack a Web Application
  • Vulnerability Scanning
  • Wireless Crypto and Client Attacks
  • Wireless Fundamentals

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking, and security experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: kdwagoner

Instructor comments: Very knowledgeable. Kept class focused and on task

Facilities comments: Good

Liked the class?  Then let everyone know!

TN-979: Intrusion Analyst Course

Course Overview:

Intrusion Analyst is a hands-on course that covers intrusion detection in-depth. This includes concepts such as the use of Snort, network traffic analysis, and IDS signatures.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of packet and intrusion analysis.

Attendees to TN-979: Intrusion Analyst will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Advanced Snort Concepts
  • Analyst Toolkit
  • Domain Name System (DNS)
  • Examining Packet Crafting
  • Examining Packet Header Fields
  • Fragmentation
  • ICMP Theory
  • IDS Interoperability
  • IDS Patterns
  • IDS/IPS Management & Architecture Issues
  • Indications, Warnings & Traffic Correlation
  • IPv6
  • Microsoft Protocols
  • Network Traffic Analysis
  • NIDS Evasion, Instertion & Checksums
  • Snort Fundamentals & Configuration
  • Snort GUIs & Sensor Management
  • Snort Performance, Active Response & Tagging
  • Snort Rules
  • Stimulus Response
  • TCPdump Fundamentals
  • TCP/IP Fundamentals
  • Wireshark Fundamentals
  • Writing TCPdump Filters

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: Tosha

Instructor comments: Dave was an excellent instructor. He is very informative and knowledgeable in the course and the material. I have enjoyed the class and I would take another course with him as the instructor.

Facilities comments: Very nice and clean hotel.

User: buckey26

Instructor comments: Dave was one of the best instructors I have ever had for a tech course. He broke down everything to the point where you can understand it internally.

Liked the class?  Then let everyone know!

TN-225: Network+ Skills Class

 

Course Overview:

TN-225: Network+ Skills Class is a five-day course that teaches students the fundamentals of networking. Through hands-on training, students learn the vendor-independent networking skills & concepts that affect all aspects of networking, such as installing & configuring the TCP/IP client. 

Attendees to the TN-225: Network+ Skills Class will receive TechNow approved course materials and expert instruction.

Please Note:  This course is designed with a focus on skills and is not a preparation course for certification.

Dates/Locations:

No Events

Duration 5 days

Course Objectives:

  • Introduction Defining Networking
  • Building a Network with OSI
  • Hardware Concepts
  • Ethernet Basics
  • Modern Ethernet
  • Non-Ethernet Networks
  • Installing a Physical Network
  • Wireless Networking
  • Protocols
  • TCP/IP
  • Network Operating Systems
  • Sharing Resources
  • Going Large with TCP/IP
  • TCP/IP & the Internet
  • Remote Connectivity
  • Protecting Your Network
  • Interconnecting Network Operating Systems
  • The Perfect Server
  • Zen & the Art of Network Support

Prerequisites:

Comments

Latest comments from students

User: dsm

Instructor comments: great presentation

Facilities comments: too cold

User: fillyok

Instructor comments: He has an excellent way of explaining things on the level that anyone can understand easily. I wasn't looking forward to this class at all but I'm really glad I attended now. I have a much clearer understanding of networking fundamentals that I never would've received via CBTs. I'd heard really good things about Tim Burkard's teaching skills and now I know they're true. I wouldn't mind taking other classes that he teaches,

Facilities comments: The facilities are really nice and there weren't any problems as far as I could tell. The hotel staff is very nice.

 

Like the class?  Then let everyone know!

N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI)

Course Overview:

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR).

Attendees to N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
  • Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
  • Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
  • Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
  • Optimize OSPFv2 and OSPFv3 behavior
  • Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
  • Implement route redistribution using filtering mechanisms
  • Troubleshoot redistribution
  • Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA)
  • Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
  • Optimize MP-BGP in IPv4 and IPv6 environments
  • Troubleshoot MP-BGP for IPv4 and IPv6
  • Describe the features of Multiprotocol Label Switching (MPLS)
  • Describe the major architectural components of an MPLS VPN
  • Identify the routing and packet forwarding functionalities for MPLS VPNs
  • Explain how packets are forwarded in an MPLS VPN environment
  • Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
  • Implement Dynamic Host Configuration Protocol (DHCP)
  • Describe the tools available to secure the IPV6 first hop
  • Troubleshoot Cisco router security features
  • Troubleshoot infrastructure security and services

Prerequisites:

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!