Course Overview:

The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network. This course covers advanced routing and infrastructure technologies, expanding on the topics covered in the N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR).

Attendees to N-425 : Implementing Cisco Enterprise Advanced Routing and Services ( ENARSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-410 Implementing Cisco® Enterprise Advanced Routing and Services (ENARSI) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
  • Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
  • Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
  • Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
  • Optimize OSPFv2 and OSPFv3 behavior
  • Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
  • Implement route redistribution using filtering mechanisms
  • Troubleshoot redistribution
  • Implement path control using Policy-Based Routing (PBR) and IP Service Level Agreement (SLA)
  • Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
  • Optimize MP-BGP in IPv4 and IPv6 environments
  • Troubleshoot MP-BGP for IPv4 and IPv6
  • Describe the features of Multiprotocol Label Switching (MPLS)
  • Describe the major architectural components of an MPLS VPN
  • Identify the routing and packet forwarding functionalities for MPLS VPNs
  • Explain how packets are forwarded in an MPLS VPN environment
  • Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
  • Implement Dynamic Host Configuration Protocol (DHCP)
  • Describe the tools available to secure the IPV6 first hop
  • Troubleshoot Cisco router security features
  • Troubleshoot infrastructure security and services

Prerequisites:

 

Comments

Latest comments from students


Liked the class?  Then let everyone know!

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       

Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students


Like the class?  Then let everyone know!

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students


User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.


Liked the class?  Then let everyone know!

 

 

 

 

 

 

 

Course Overview:

The Computer Hacking Forensic Investigator (CHFI) course delivers the security discipline of digital forensics from a vendor-neutral perspective. CHFI is a comprehensive course covering major forensic investigation scenarios and enabling students to acquire necessary hands-on experience with various forensic investigation techniques and standard forensic tools necessary to successfully carry out a computer forensic investigation leading to the prosecution of perpetrators.

The CHFI certification gives participants the necessary skills to perform an effective digital forensics investigation. CHRI presents a methodological approach to computer forensics including searching and seizing, chain-of-custody, acquisition, preservation, analysis and reporting of digital evidence

What’s Included:

  • 5 days of instructor-led in classroom training
  • Detailed Labs for hands-on learning experience; approximately 50% of training is dedicated to labs
  • Hundreds of investigation tools including EnCase, Access Data FTL, & ProDiscover
  • Huge cache of evidence files for analysis including RAW, .dd images, video & audio files, MS Office files, systems files, etc.
  • CHFI Courseware
  • Exam Voucher
  • CHFI onsite exam scheduling

Course Objectives:

  • Establish threat intelligence and key learning points to support pro-active profiling and scenario modeling
  • Perform anti-forensic methods detection
  • Perform post-intrusion analysis of electronic and digital media to determine the who, where, what, when, and how the intrusion occurred
  • Extract and analyze of logs from various devices like proxy, firewall, IPS, IDS, Desktop, laptop, servers, SIM tool, router firewall, switches AD server, DHCP logs, Access Control Logs & conclude as part of investigation process
  • Identify & check the possible source/ incident origin
  • Recover deleted files and partitions in Windows, MAC OS X, and Linux
  • Conduct reverse engineering for known and suspected malware files
  • Collect data using forensic technology methods in accordance with evidence handling procedures, including collection of hard copy and electronic documents

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

    • Module 01. Computer Forensics in Today’s World
    • Module 02. Computer Forensics Investigation Process
    • Module 03. Understanding Hard Disks and File Systems
    • Module 04. Data Acquisition and Duplication
    • Module 05. Defeating Anti-forensics Techniques
    • Module 06. Operating System Forensics (Windows, Mac, Linux)
    • Module 07. Network Forensics
    • Module 08. Investigating Web Attacks
    • Module 09. Database Forensics
    • Module 10. Cloud Forensics
    • Module 10. Malware Forensics
    • Module 11. Investigating Email Crimes
    • Module 12. Investigating Email Crimes
    • Module 13. Mobile Forensics
    • Module 14. Forensics Report Writing and Presentation

 

Prerequisites:

      • 2+ years of proven information security work experience
      • Educational background with digital security specialization

    Target Audience:

      • Law Enforcement
      • Defense & Military
      • E-Business Security
      • Systems Administrators
      • Legal Professionals
      • Banking & Insurance professionals
      • Government Agencies
      • IT Managers

  • Comments

    Latest comments from students


    Liked the class?  Then let everyone know!