N-310: CCNA Extended Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive ten-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability.

Attendees to N-310: CCNA Extended Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

This course is available for group purchasing with a minimum of 4 students. Please call to get scheduling availability. (210) 733-1093

No Events

Duration: 10 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: kdinivahi29

Instructor comments: The instructor Mr. Tom Bigger has done a terrific job of substantiating the textbook content with hands on labs. He has been patient and ensure that we understood the material

User: MikeWisn

Instructor comments: Did exceptional job explaining complicated concepts.

Facilities comments: Hotel front desk phone ringing loudly during class was distracting.

Liked the class? Then let everyone know!

Programming

TechNow offers the full gamut of programming languages from ANSI C and C++ to the various Microsoft .Net languages (Visual Basic, C# and C++). If you are completely new to programming, TechNow offers courses that demonstrate the fundamentals to get you started.

If you prefer Unix/Linux, we offer Shell Programming, as well as, Perl and Python. We also offer courses in the web development languages, such as, Java Servlets, JSP, and ASP .Net.

The following is a list of our Programming training courses:

CT-425: CompTIA Advanced Security Practitioner (CASP+)

Course Overview:

This course will cover topics to ensure that students have the technical knowledge and skills required to conceptualize, design, and engineer secure solutions across complex enterprise environments. Students will be able to apply critical thinking and judgement across a broad spectrum of security disciplines to propose and implement solutions that map to enterprise drivers. This course will prepare students for the objectives covered in the CompTIA CASP+ certification exam (CAS-004).

Attendees to CT-425: CompTIA Advanced Security Practitioner (CASP+) will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
03/10/2025 - 03/14/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX
06/09/2025 - 06/13/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX
09/15/2025 - 09/19/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX
12/08/2025 - 12/12/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

Support IT governance in the enterprise with an emphasis on managing risk
Leverage collaboration tools and technology to support enterprise security
Use research and analysis to secure the enterprise
Integrate advanced authentication and authorization techniques
Implement cryptographic techniques
Implement security controls for hosts
Implement security controls for mobile devices
Implement network security
Implement security in the systems and software development lifecycle
Integrate hosts, storage, networks, applications, virtual environments, and cloud technologies in a secure enterprise architecture
Conduct security assessments
Respond to and recover from security incidents

Prerequisites:

Completion of the following or equivalent knowledge:

CompTIA Certification: A+ Essentials

CompTIA Certification: Security+

Comments

Latest comments from students

User: clbrack

Instructor comments: I expect to pass, another great class from technow!

User: christopher0470

Instructor comments: Alan takes the time to cover the material so that you understand the concepts and applications of the information presented.

Facilities comments: I like the location. It was quiet and very conducive to learning.

Liked the class? Then let everyone know!

TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking Course

Course Overview:

This course engages students by providing in-depth knowledge of the most prominent and powerful attack vectors and an environment to perform these attacks in numerous hands-on scenarios. This course goes far beyond simple scanning for low-hanging fruit, and shows penetration testers how to model the abilities of an advanced attacker to find significant flaws in a target environment and demonstrate the business risk associated with these flaws.

A skills focus enables the student to better absorb the subject matter and perform successfully on the job. This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.

Attendees to TN-989: Advanced Penetration Testing, Exploits, and Ethical Hacking course will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 5 days

Course Objectives:

Accessing the Network
Advanced Fuzzing Techniques
Advanced Stack Smashing
Attacking the Windows Domain – Enumeration
Attacking the Windows Domain – Restricted Desktops
Attacking the Windows Domain – The Attacks
Building a Metasploit Module
Crypto for Penetration Testers
Exploiting the Network
Fuzzing Introduction and Operation
Introduction to Memory and Dynamic Linux Memory
Introduction to Windows Exploitation
Manipulating the Network
Python and Scapy For Penetration Testers
Shellcode
Smashing the Stack
Windows Heap Overflow Introduction
Windows Overflows

Course Prerequisites:

GSEC or equivalent experience
UNIX, Windows, Networking, and Security Experience
This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: ryanv

Instructor comments: Great.

Facilities comments: N/A. Hotel.

User: sean.hollinger

Instructor comments: Instructor is technically knowledgeable as he has been on every course I've taken with TechNow.

Facilities comments: adequate

Liked the class? Then let everyone know!

TN-835: Certified in Risk and Information Systems Control (CRISC) Preparation Seminar

Course Overview:

Certified in Risk and Information Systems Control (CRISC), is for professionals responsible for an organization's risk management program. Students looking to acquire CRISC qualify themselves as IT security analyst, security engineer architect, information assurance program manager and senior IT auditor. CRISC certified professionals manage risk, design and oversee response measures, monitor systems for risk, and ensure the organization's risk management strategies are met.

The CRISC exam will primarily align with the terminology and concepts described in The Risk IT Framework, The Risk IT Practioner Guide, and COBIT 5. This will include applications in the evaluation and monitoring of IT-based risk, as well as the design and implementation of IS controls.

The CRISC exam covers four domains that are periodically updated to reflect the changing needs of the profession:

Domain 1: Risk Identification
Domain 2: Risk Assessment
Domain 3: Risk Response and Mitigation
Domain 4: Risk and Control Monitoring and Reporting

This course is designed to assist in your exam preparation for the CRISC exam.

Attendees to TN-835: Certified in Risk and Information Systems Control (CRISC) Seminar will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Risk IT Framework—Purpose and Principles
Essentials of Risk Governance, Evaluation, and Response
Risk and Opportunity Management Using CobiT, Val IT and Risk IT
The Risk IT Framework Process Model Overview
Managing Risk in Practice—The Practitioner Guide Overview
Overview of the Risk IT Framework Process Model
The Risk IT Framework

Prerequisites:

A minimum of at least three (3) years of cumulative work experience performing the tasks of a CRISC professional across at least three (3) CRISC domains is required for certification. There are no substitutions or experience waivers.

Comments

Latest comments from students

User: tracycampbell

Instructor comments: Dave had great command of the class and the flow of information. The lessons seem relevant to the exam and the course material should assist greatly with passing. As a bonus, his breakdown of PKI helped with my current job requirements.

Facilities comments: The Home2Suites by Hilton was FANTASTIC!

Liked the class? Then let everyone know!