CT-425: CompTIA Advanced Security Practitioner (CASP+)

Course Overview:

This course will cover topics to ensure that students have the technical knowledge and skills required to conceptualize, design, and engineer secure solutions across complex enterprise environments. Students will be able to apply critical thinking and judgement across a broad spectrum of security disciplines to propose and implement solutions that map to enterprise drivers. This course will prepare students for the objectives covered in the CompTIA CASP+ certification exam (CAS-004).

Attendees to CT-425: CompTIA Advanced Security Practitioner (CASP+) will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
03/10/2025 - 03/14/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX
06/09/2025 - 06/13/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX
09/15/2025 - 09/19/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX
12/08/2025 - 12/12/2025 09:00 -17:00	CT-425: CompTIA Advanced Security Practitioner (CASP+) TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

Support IT governance in the enterprise with an emphasis on managing risk
Leverage collaboration tools and technology to support enterprise security
Use research and analysis to secure the enterprise
Integrate advanced authentication and authorization techniques
Implement cryptographic techniques
Implement security controls for hosts
Implement security controls for mobile devices
Implement network security
Implement security in the systems and software development lifecycle
Integrate hosts, storage, networks, applications, virtual environments, and cloud technologies in a secure enterprise architecture
Conduct security assessments
Respond to and recover from security incidents

Prerequisites:

Completion of the following or equivalent knowledge:

CompTIA Certification: A+ Essentials

CompTIA Certification: Security+

Comments

Latest comments from students

User: clbrack

Instructor comments: I expect to pass, another great class from technow!

User: christopher0470

Instructor comments: Alan takes the time to cover the material so that you understand the concepts and applications of the information presented.

Facilities comments: I like the location. It was quiet and very conducive to learning.

Liked the class? Then let everyone know!

TN-415: Computer Hacking Forensics Investigator (CHFI)

Course Overview:

The Computer Hacking Forensic Investigator (CHFI) course delivers the security discipline of digital forensics from a vendor-neutral perspective. CHFI is a comprehensive course covering major forensic investigation scenarios and enabling students to acquire necessary hands-on experience with various forensic investigation techniques and standard forensic tools necessary to successfully carry out a computer forensic investigation leading to the prosecution of perpetrators.

The CHFI certification gives participants the necessary skills to perform an effective digital forensics investigation. CHRI presents a methodological approach to computer forensics including searching and seizing, chain-of-custody, acquisition, preservation, analysis and reporting of digital evidence

What’s Included:

5 days of instructor-led in classroom training
Detailed Labs for hands-on learning experience; approximately 50% of training is dedicated to labs
Hundreds of investigation tools including EnCase, Access Data FTL, & ProDiscover
Huge cache of evidence files for analysis including RAW, .dd images, video & audio files, MS Office files, systems files, etc.
CHFI Courseware
Exam Voucher
CHFI onsite exam scheduling

Course Objectives:

Establish threat intelligence and key learning points to support pro-active profiling and scenario modeling
Perform anti-forensic methods detection
Perform post-intrusion analysis of electronic and digital media to determine the who, where, what, when, and how the intrusion occurred
Extract and analyze of logs from various devices like proxy, firewall, IPS, IDS, Desktop, laptop, servers, SIM tool, router firewall, switches AD server, DHCP logs, Access Control Logs & conclude as part of investigation process
Identify & check the possible source/ incident origin
Recover deleted files and partitions in Windows, MAC OS X, and Linux
Conduct reverse engineering for known and suspected malware files
Collect data using forensic technology methods in accordance with evidence handling procedures, including collection of hard copy and electronic documents

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

- Module 01. Computer Forensics in Today’s World
- Module 02. Computer Forensics Investigation Process
- Module 03. Understanding Hard Disks and File Systems
- Module 04. Data Acquisition and Duplication
- Module 05. Defeating Anti-forensics Techniques
- Module 06. Operating System Forensics (Windows, Mac, Linux)
- Module 07. Network Forensics
- Module 08. Investigating Web Attacks
- Module 09. Database Forensics
- Module 10. Cloud Forensics
- Module 10. Malware Forensics
- Module 11. Investigating Email Crimes
- Module 12. Investigating Email Crimes
- Module 13. Mobile Forensics
- Module 14. Forensics Report Writing and Presentation

Prerequisites:

- - 2+ years of proven information security work experience
  - Educational background with digital security specialization
Target Audience:
- - Law Enforcement
  - Defense & Military
  - E-Business Security
  - Systems Administrators
  - Legal Professionals
  - Banking & Insurance professionals
  - Government Agencies
  - IT Managers
Comments

Latest comments from students

Liked the class? Then let everyone know!

N-305: CCNA Bootcamp

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom. Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time	Event
02/10/2025 - 02/14/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
05/19/2025 - 05/23/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
08/11/2025 - 08/15/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX
11/17/2025 - 11/21/2025 08:00 -16:00	N-305: CCNA Bootcamp TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

- Identify the components of a computer network and describe their basic characteristics
- Understand the model of host-to-host communication
- Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
- Describe LANs and the role of switches within LANs
- Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
- Install a switch and perform the initial configuration
- Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
- Describe the TCP/IP Transport layer and Application layer
- Explore functions of routing
- Implement basic configuration on a Cisco router
- Explain host-to-host communications across switches and routers
- Identify and resolve common switched network issues and common problems associated with IPv4 addressing
- Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
- Describe the operation, benefits, and limitations of static routing
- Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
- Describe the application and configuration of inter-VLAN routing
- Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
- Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
- Configure link aggregation using EtherChannel
- Describe the purpose of Layer 3 redundancy protocols
- Describe basic WAN and VPN concepts
- Describe the operation of Access Control Lists (ACLs) and their applications in the network
- Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
- Describe basic Quality of Service (QoS) concept
- Describe network and device architectures and introduce virtualization
- Introduce the concept of network programmability and Software-Defined Networking (SDN)
- Configure basic IOS system monitoring tools
- Describe the management of Cisco devices
- Describe the current security threat landscape
- Describe threat defense technologies
- Implement a basic security configuration of the device management plane
- Implement basic steps to harden network devices

Lab Objectives:

- - Get started with Cisco Command-Line Interface (CLI)
  - Observe How a Switch Operates
  - Perform Basic Switch Configuration
  - Implement the Initial Switch Configuration
  - Inspect TCP/IP Applications
  - Configure an Interface on a Cisco Router
  - Configure and Verify Layer 2 Discovery Protocols
  - Implement an Initial Router Configuration
  - Configure Default Gateway
  - Explore Packet Forwarding
  - Troubleshoot switch Media and Port Issues
  - Troubleshoot Port Duplex Issues
  - Configure Basic IPv6 Connectivity
  - Configure and Verify IPv4 Static Routes
  - Configure Iv6 Static Routes
  - Implement IPv4 Static Routing
  - Implement IPv6 Static Routing
  - Configure VLAN and Trunk
  - Troubleshoot VLANs and Trunk
  - Configure a Router on a Stick
  - Implement Multiple VLANs and Basic Routing Between the VLANs
  - Configure and Verify Single-Area OSPF
  - Configure and Verify EtherChannel
  - Improve Redundant Switched Topologies with EtherChannel
  - Configure and Verify IPv4 ACLs
  - Implement Numbered and Named IPv4 ACLs
  - Configure a Provider-Assigned IPv4 Address
  - Configure Static NAT
  - Configure Dynamic NAT and Port Address Translation (PAT)
  - Implement PAT
  - Log into the WLC
  - Monitor the WLC
  - Configure a Dynamic (VLAN) Interface
  - Configure a DHCP Scope
  - Configure a WLAN
  - Define a Remote Access Dial-In User Service (RADIUS) Server
  - Explore Management Options
  - Explore the Cisco DNA Center
  - Configure and Verify NTP
  - Configure System Message Logging
  - Create the Cisco IOS Image Backup
  - Upgrade Cisco IOS Image
  - Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
  - Secure Console and Remote Access
  - Enable and Limit Remote Access Connectivity
  - Secure Device Administrative Access
  - Configure and Verify Port Security
  - Implement Device Hardening

Prerequisites:

- - Familiarity in the following networking topics:
    - TCP/IP
    - IP Configuration
    - Peer-to-Peer Networking
    - Subnetting
    - Building a Routing Table
  - It is not required but highly recommended to have the following certifications:
    - Security +
    - Network +

Comments

Latest comments from students

User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.

User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments

Liked the class? Then let everyone know!

CL-218: Introduction to Cloud Infrastructure and Operations Bootcamp

Course Overview:

This bootcamp is a customized course for Cloud Essentials+ and Cloud+ that leverages 8 days to provide greater value than just the delivery of two separate courses. The 8 days of instruction prepare the student for the CCSP course.

TechNow has Identified overlap and uses time saved to:

Introduce hands-on skills (Open Source and AWS)
Go more in-depth on theory using hands-on to reinforce concepts
Do exam prep with practice questions

This course covers the knowledge and skills required to understand standard Cloud terminologies/methodologies, to implement, maintain, and deliver cloud technologies and infrastructures (e.g. server, network, storage, and virtualization technologies), and to understand aspects of IT security and use of industry best practices related to cloud implementations and the application of virtualization.

This bootcamp helps prepare students for 2 certifications, CompTIA Clouds Essentials+ and CompTIA Cloud+. After this course students will also be prepared to continue their education by taking CL-315: CCSP – Certified Cloud Security Professional Preparation Seminar .

TechNow has worked worldwide enterprise infrastructures for over 20 years and has developed demos and labs to exemplify the techniques required to demonstrate cloud technologies and to effectively manage security in the cloud environment.

TechNow is a CompTIA partner and uses official CompTIA Cloud Essentials+ and CompTIA Cloud+ curriculum.

Attendees to CL-218: Introduction to Cloud Infrastructure and Operations Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Course Duration: 8 days

Course Objectives:

Learn the fundamental concepts of cloud computing
Learn the business aspects and impacts of cloud computing
Differentiate the types of cloud solutions and the adoptions measures for each
Identify the technical challenges and the mitigation measures involved in cloud computing
Identify the technical challenges and the mitigation measures involved in cloud computing
Identify the steps to successfully adopt cloud services
Identify the basic concepts of ITIL and describe how the ITIL framework is useful in the implementation of cloud computing in an organization
Identify the possible risks involved in cloud computing and the risk mitigation measures, and you will also identify the potential cost considerations for the implementation of cloud and its strategic benefits
Prepare to deploy cloud solutions
Deploy a pilot project
Test a pilot project deployment
Design a secure network for cloud deployment
Determine CPU and memory sizing for cloud deployments
Plan Identity and Access Management for cloud deployments
Analyze workload characteristics to ensure successful migration to the cloud
Secure systems to meet access requirements
Maintain cloud systems
Implement backup, restore, and business continuity measures
Analyze cloud systems for required performance
Analyze cloud systems for anomalies and growth forecasting
Troubleshoot deployment, capacity, automation, and orchestration issues
Troubleshoot connectivity issues
Troubleshoot security issues

Course Prerequisites:

Security+, Network+ or equivalent experience
Managing or administering at least one of UNIX, Windows, Databases, networking, or security

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-455: Securing Networks with ASA Fundamentals (SNAF)

Course Overview:

In this course, you will gain the knowledge and skills needed to configure, maintain, and operate Cisco ASA 5500 Series Adaptive Security Appliance.

Attendees to N-455: Securing Networks with ASA Fundamentals (SNAF) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Introducing Cisco Security Appliance Technology and Features
Cisco Adaptive Security Appliance and PIX Security Appliance Families
Getting Started with Cisco Security Appliances
Essential Security Appliance Configuration
Configuring Translations and Connection Limits
Using ACLS and Content Filtering
Configuring Object Grouping
Switching and Routing on Security Appliances
Configuring AAA for Cut-Through Proxy
Configuring the Cisco Modular Policy Framework
Configuring Advanced Protocol Handling
Configuring Threat Detection
Configuring Site-to-Site VPNS Using PreShared Keys
Configuring Security Appliance Remote Access VPNs
Configuring Cisco Security Appliance for SSL VPN
Configuring Transparent Firewalls Mode
Configuring Security Contexts
Configuring Failover
Managing Security Appliances