PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content. This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE). Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure. This is not a virtualized theoretical course. This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk. Real hardware per student for real experience and real skill development. TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies. Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications. Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

Dates/Locations: No Events

Duration: 2 days

Course Objectives: Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

Module 0 – Introduction & Overview
Mod 1: Advanced Interface
- Configuration
- Advanced NAT
- Policy-Based
- Forwarding
- Routing Protocols (OSPF)
Mod 2: App-ID™ –
- Custom Applications
- Defining New Application Signatures
- Application Override
Mod 3: Advanced Content-ID™
- Custom Threat Signatures
- Data Filtering
- DoS Protection
- Botnet Report
Mod 4: Advanced User-ID™
- Terminal Server Agent
- Captive Portal
- XML API

Day 2

Mod 5: Quality of Service
- Configuring Quality of Service
Mod 6: GlobalProtect™
- Implementation of GlobalProtect
- Install and Configure Portal, Gateway, and Agents
Mod 7: Monitoring and Reporting
- Log Forwarding
- SNMP
- Reporting
Mod 8: Active/Active High Availability
- Configuring Active/Active HA

Prerequisites:

PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class? Then let everyone know!

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies

Course Overview:

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies is the big picture overview of a SOC, other courses provide a deep dive into the technologies that a SOC may utilize. This course addresses the internal workings of staff, skills required, required authorizations, internal agreements, and setting appropriate expectation levels of a SOC within budget constraints. A SOC is not a one size fits all, the instructor has decades of security experience and brings to the table opportunities to discuss what can work within constraints. Many organizations are coming to the realization that some level of a SOC is now required and to learn just what decisions need to be made: Out-sourced, In-sourced, budgets, capabilities and many more. Students leave with a worksheet of how to progress when they get back to their organization.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies – Is a course that incorporates lecture, demos, and group exercises for standing up a Security Operations Center (SOC). Students learn strategies and resources required to deploy, build, and run Network Security Monitoring (NSM) and work roles and flows for a SOC. No network is bullet proof and when attackers access your network, this course will show you options and resources to build a security net to detect, contain, and control the attacker. Examples on what it takes to architect an NSM solution to identify sophisticated attackers and a response strategy. Properly implemented detection and response technologies is integral to incident response and provides the responders timely information and tools to react to the incident. Effective demonstrations are given of Open Source technologies that build up a SOC, but any software can be used and demonstrations are provided to demonstrate technology families not push a specific solution.

TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies demonstrations utilize a cyber range that gives each student in-depth knowledge of monitoring live systems to include: Cisco, Windows, Linux, IoT, and Firewalls; and software and services to provide orchestrate Incident Response, Intelligence Analysis, and Hunt Operations.

Attendees to TN-542: Establishing a Security Operations Center (SOC) People, Processes, and Technologies class will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 2 Days

Course Objective:

Prerequisites:

Students should have an understanding of the security field.

Course Outline:

What threats does my organization care about?
What does a threat look like?
What does a threat look like?
How to present the SOC internally.
Communication with Stakeholders and Executives
People
- Establishing a skill matrix and work roles for SOC members
- Establishing a training path
- Personnel background requirementsProcesses
Processes
- Alignment to standards: NIST, PCI, HIPAA, etc.
- Risk related decision trees
- Playbooks
- Threat Intelligence Integration
Technology – Tool Suites to Support:
- Ethical Hacking
- Network Security Monitoring and SIEM
- Forensics
- Dashboards
- Analysis and Hunting
- Incident Management and Ticketing

Comments

Latest comments from students

Liked the class? Then let everyone know!

N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR)

Course Overview:

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.

Attendees to N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) will receive TechNow approved course materials, expert instruction, and prepare you to take the 350-401 Implementing Cisco® Enterprise Network Core Technologies (ENCOR) exam.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
Troubleshoot Layer 2 connectivity using VLANs and trunking
Implementation of redundant switched networks using Spanning Tree Protocol
Troubleshooting link aggregation using Etherchannel
Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
Describe the virtualization technology of servers, switches, and the various network devices and components
Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
Describe wireless roaming and location services
Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-Shared Key (PSK) wireless client authentication on a WLC
Troubleshoot wireless client connectivity issues using various available tools
Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
Explain basic Python components and conditionals with script writing and analysis
Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
Describe APIs in Cisco DNA Center and vManage

Prerequisites:

CCNA certification
Implementation of Enterprise LAN networks
Basic understanding of Enterprise routing and wireless connectivity
Basic understanding of Python scripting

Comments

Latest comments from students

User: don.seguin

Instructor comments: Tim was a great.

Facilities comments: The classroom was great.

User: jrtrussell

Instructor comments: Awesome

Facilities comments: Great

Liked the class? Then let everyone know!

VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives

Course Overview:

This course explores the VMware Infrastructure and related security, which consists of VMware ESX Server & VMware Virtual Center Server. We will look at both the design environments and operational processes of the VMware Infrastructure including security. This course provides IT architects with the insight needed to tackle tough issues in server virtualization such as virtual machine technologies, storage infrastructure, and designing clustered environments with security practices included. Extensive hands-on labs provide for a rich student experience.

Hypervisors and their supporting environment require attention to security due to the aggregated risk of hosting multiple virtual servers. This course explores the security of virtualized environments. Student configure ESXi by learning to manage the security and risk between ESXi, virtual servers and security integration of ESXi to the physical network infrastructure including appropriate segregation from other sensitive networks and management networks. How to configure virtual networks when some hosts are dual or multi homed, but internally segregate between the two or more connected networks with different security levels. Appropriate integration of zero-clients and thin clients. Configuration of defensive measures on hosts, servers, hypervisors within the virtual environment and practices for those guarding it externally. Integration of Active Directory and other AAA/CIA related services relative to a virtualized environment.

Students are also walked through DoD ESXi Security Technical Implementation Guide (STIG). Introduction to the impact of Intel Trusted Execution Technology integrated with ESXi to create a trusted platform for virtual machines. Additionally the instructor walks the students through NIST Special Publication 800-125A: Security Recommendations for Hypervisor Deployment on Servers, and NIST Special Publication 800-125B: Secure Virtual Network Configuration for Virtual Machine (VM) Protection.

Attendees to “VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives” will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

• Virtual Infrastructure Overview
• ESX and ESXi Server Installation
• Configuration of Networking, Scalability and Security
• Storage
• Install and Configure vCenter Server and Components
• Creation, Deployment, Management, and Migration of Virtual Machines
• Utilize vCenter Server for Resource Management
• Utilize vCenter Server for Virtual Machine Access Control and User Managment
• Use vCenter Server to increase scalability
• Monitoring Your Environment
• Data & Availability Protection Troubleshooting
• Use VMware vCenter Update Manager to apply ESXi patches
• Use vCenter Server to manage vMotion, HA, DRS and data protection.

CT-395: CySA+ Cybersecurity Analyst

Course Overview:

CT-395: CompTIA CySA+ Cybersecurity Analyst is for IT professionals looking to gain IT security analyst skills, and for those following the recommended skills pathway to achieve cybersecurity mastery. It provides a bridge between CompTIA Security+ (CT-325) and CompTIA Advanced Security Practitioner (CASP,CT-425), thus completing a certification path within the CompTIA family of certifications. As attackers have learned to evade traditional signature-based solutions, an analytics-based approach has become extremely important. CySA+ applies behavioral analytics to the IT security market to improve the overall state of security. The CompTIA Cybersecurity Analyst (CySA+) certification verifies that successful candidates have the knowledge and skills required to configure and use threat detection tools, perform data analysis and interpret the results to identify vulnerabilities, threats and risks to an organization, with the end goal of securing and protecting applications and systems within an organization. Let us help you bridge this gap, and leave you prepared for the certification exam (CS0-002).

TechNow is a CompTIA partner uses official CompTIA CySA+ curriculum.

Dates/Locations:

Date/Time	Event
03/03/2025 - 03/07/2025 09:00 -17:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX
06/02/2025 - 06/06/2025 09:00 -17:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX
09/08/2025 - 09/12/2025 08:00 -16:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX
12/01/2025 - 12/05/2025 08:00 -16:00	CT-395: CySA+ Cybersecurity Analyst TechNow, Inc, San Antonio TX

Duration: 5 Days

Course Objectives:

Threat Management
Vulnerability Management
Cyber Incident Response
Security Architecture and Tool Sets

Prerequisites:

While there is no required prerequisite, the CompTIA CySA+ certification is intended to follow CT-325: Security+ or equivalent experience. It is recommended for CompTIA CySA+ candidates to have the following:

3-4 years of hands-on information security or related experience
Network+, Security+, or equivalent knowledge.

Comments

Latest comments from students