Course Overview:

The Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) course gives you the knowledge and skills needed to configure, troubleshoot, and manage enterprise wired and wireless networks. You’ll also learn to implement security principles, implement automation and programmability within an enterprise network, and how to overlay network design by using SD-Access and SD-WAN solutions.

Attendees to N-415: Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) will receive TechNow approved course materials, expert instruction, and prepare you to take the 350-401 Implementing Cisco® Enterprise Network Core Technologies (ENCOR) exam.

Document Flow Chart iconsm

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Illustrate the hierarchical network design model and architecture using the access, distribution, and core layers
  • Compare and contrast the various hardware and software switching mechanisms and operation, while defining the Ternary Content Addressable Memory (TCAM) and Content Addressable Memory (CAM), along with process switching, fast switching, and Cisco Express Forwarding concepts
  • Troubleshoot Layer 2 connectivity using VLANs and trunking
  • Implementation of redundant switched networks using Spanning Tree Protocol
  • Troubleshooting link aggregation using Etherchannel
  • Describe the features, metrics, and path selection concepts of Enhanced Interior Gateway Routing Protocol (EIGRP)
  • Implementation and optimization of Open Shortest Path First (OSPF)v2 and OSPFv3, including adjacencies, packet types, and areas, summarization, and route filtering for IPv4 and IPv6
  • Implementing External Border Gateway Protocol (EBGP) interdomain routing, path selection, and single and dual-homed networking
  • Implementing network redundancy using protocols including Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP)
  • Implementing internet connectivity within Enterprise using static and dynamic Network Address Translation (NAT)
  • Describe the virtualization technology of servers, switches, and the various network devices and components
  • Implementing overlay technologies such as Virtual Routing and Forwarding (VRF), Generic Routing Encapsulation (GRE), VPN, and Location Identifier Separation Protocol (LISP)
  • Describe the components and concepts of wireless networking including Radio Frequency (RF) and antenna characteristics, and define the specific wireless standards
  • Describe the various wireless deployment models available, include autonomous Access Point (AP) deployments and cloud-based designs within the centralized Cisco Wireless LAN Controller (WLC) architecture
  • Describe wireless roaming and location services
  • Describe how APs communicate with WLCs to obtain software, configurations, and centralized management
  • Configure and verify Extensible Authentication Protocol (EAP), WebAuth, and Pre-Shared Key (PSK) wireless client authentication on a WLC
  • Troubleshoot wireless client connectivity issues using various available tools
  • Troubleshooting Enterprise networks using services such as Network Time Protocol (NTP), Simple Network Management Protocol (SNMP), Cisco Internetwork Operating System (Cisco IOS®) IP Service Level Agreements (SLAs), NetFlow, and Cisco IOS Embedded Event Manager
  • Explain the use of available network analysis and troubleshooting tools, which include show and debug commands, as well as best practices in troubleshooting
  • Configure secure administrative access for Cisco IOS devices using the Command-Line Interface (CLI) access, Role-Based Access Control (RBAC), Access Control List (ACL), and Secure Shell (SSH), and explore device hardening concepts to secure devices from less secure applications, such as Telnet and HTTP
  • Implement scalable administration using Authentication, Authorization, and Accounting (AAA) and the local database, while exploring the features and benefits
  • Describe the enterprise network security architecture, including the purpose and function of VPNs, content security, logging, endpoint security, personal firewalls, and other security features
  • Explain the purpose, function, features, and workflow of Cisco DNA Center™ Assurance for Intent-Based Networking, for network visibility, proactive monitoring, and application experience
  • Describe the components and features of the Cisco SD-Access solution, including the nodes, fabric control plane, and data plane, while illustrating the purpose and function of the Virtual Extensible LAN (VXLAN) gateways
  • Define the components and features of Cisco SD-WAN solutions, including the orchestration plane, management plane, control plane, and data plane
  • Describe the concepts, purpose, and features of multicast protocols, including Internet Group Management Protocol (IGMP) v2/v3, Protocol-Independent Multicast (PIM) dense mode/sparse mode, and rendezvous points
  • Describe the concepts and features of Quality of Service (QoS), and describe the need within the enterprise network
  • Explain basic Python components and conditionals with script writing and analysis
  • Describe network programmability protocols such as Network Configuration Protocol (NETCONF) and RESTCONF
  • Describe APIs in Cisco DNA Center and vManage

Prerequisites:

  • CCNA certification
  • Implementation of Enterprise LAN networks
  • Basic understanding of Enterprise routing and wireless connectivity
  • Basic understanding of Python scripting

 

Comments

Latest comments from students


User: don.seguin

Instructor comments: Tim was a great.

Facilities comments: The classroom was great.


User: jrtrussell

Instructor comments: Awesome

Facilities comments: Great


Liked the class?  Then let everyone know!

 


Course Overview:

This course is instructed with an instructor in the classroom with provided lab equipment and Cyber Range.

Students enrolled in the Certified Network Defender course, will gain a detailed understanding and hands on ability to function in real life situations involving network defense. They will gain the technical depth required to actively design a secure network in your organization. This program will be akin to learning math instead of just using a calculator.

This course gives you the fundamental understanding of the true construct of data transfer, network technologies, software technologies so that you understand how networks operate, understand what software is automating and how to analyze the subject material.

You will learn how to protect, detect and respond to, and predict threats on the network.  This builds upon the typical knowledge and skills of Network Administrators in network components, traffic, performance and utilization, network topology, system locations, and security policies.

You will learn network defense fundamentals, the application of network security controls, protocols, perimeter appliances, secure IDS, VPN and firewall configuration. You will then learn the intricacies of network traffic signature, analysis and vulnerability scanning which will help you when you design greater network security policies and successful incident response plans. These skills will help you foster resiliency and continuity of operations during attacks.

This course supports a certification that is DoD approved 8570 Baseline Certificate and meets DoD 8140/8570 training requirements.

 

What’s Included:

  • EC-Council official E-Courseware
  • EC-Council iLabs access included for 6 months
  • EC-Council official Certificate of Attendance
  • CND Exam Voucher with 1 FREE RETAKE VOUCHER

 

Security Course Flow
Document Flow Chart iconsm

Dates/Locations:

No Events

Duration: 5 Days

Course Content:

  • Module 01. Network and Defense Strategies
  • Module 02. Administrative Network Security
  • Module 03. Technical Network Security
  • Module 04. Network Perimeter Security
  • Module 05. Endpoint Security-Windows Systems
  • Module 06. Endpoint Security- Linux Systems
  • Module 07. Endpoint Security- Mobile Devices
  • Module 08. Endpoint Security- IoT Devices
  • Module 09. Administrative Application Security
  • Module 10. Data Security
  • Module 11. Enterprise Virtual Network Security
  • Module 12. Enterprise Cloud Network Security
  • Module 13. Enterprise Wireless Network Security
  • Module 14. Network Traffic Monitoring and Analysis
  • Module 15. Network Logs Monitoring and Analysis
  • Module 16. Incident Response and Forensic Investigation
  • Module 17. Business Continuity and Disaster Recovery
  • Module 18. Risk Anticipation with Risk Management
  • Module 19. Threat Assessment with Attack Surface Analysis
  • Module 20. Threat Prediction with Cyber Threat Intelligence

 

Prerequisites:

  • Basic network and host operations knowledge
  • Experience commensurate with one to five years of network, host, or application administration
  • TN-325:Security+   or equivalent

 

Courses to follow:

 

Target Audience:

Network Administrators, Network Security Administrators, Network Security Engineer, Network Defense Technicians, Network Analyst, Security Analyst, Security Operator, and anyone involved in network operations

 

About us:

TechNow has taught security courses for almost 30 years, before most certifications existed and has successfully moved students through certification programs associated with IAPP, SANS, EC-Council and ISC2. Our instructor maintains over a dozen security certifications and has been the director of a company with internationals sales in security training, consulting, and compliance.

Tech Now, Inc. is an accredited Training Center with Ec-Council.

Comments

Latest comments from students


Liked the class?  Then let everyone know!

 

Course Overview:

This hands-on course provides a comprehensive introduction to programming logic, and builds a solid foundation of programming skills that can be used to master additional programming languages like C, C++, PERL, Java or Python. To learn programming you must focus on a particular language, and we have chosen Java.  In this course you will write and debug programs in Python. If you would like this course to use a different computer language, that can be arranged.

Attendees to PL-115: Fundamentals of Computer Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Writing Simple Programs Data Types, Constants, & Variables
  • Screen Output & Keyboard Input
  • Expressions
  • Decision Making
  • Looping
  • Subroutines
  • Debugging
  • Data Collections – Arrays
  • Data Collections – Classes Working with Files

Prerequisites:

  • This course is for students starting out in programming.  No programming experience is required.

 

Comments

Latest comments from students


User: tsonger

Instructor comments: While I could tell the instructor was very knowledgeable, his instructions were not very clear. He could've done a better job preparing for the class.

Facilities comments: Room was fine. The location of the room could have been better as the dings from the elevator were a bit distractive.


User: TracyPaul

Instructor comments: Very knowledgeable. Diagnosed our programming problems in short order. Could go into the details of 'why', versus only the 'how'.

Facilities comments: Outstanding. The hotel staff did a great job supporting our class.


 

Liked the class?  Then let everyone know!

Course Overview:

TechNow’s Course ensures that you are ready to test for the CCNA Certification. This intensive five-day program is a high end, hands-on, bootcamp using physical routers & switches in classroom.  Students will learn how to install, operate, configure, and verify basic IPv4 and IPv6 networks. The course covers configuring network components such as switches, routers, and wireless LAN controllers; managing network devices; and identifying basic security threats. The course also gives you a foundation in network programmability, automation, and software-defined networking. Additionally the course stress tests the students on exam practices that insure the student a successful outcome on the 200-301 CCNA exam.

This course helps you prepare to take the 200-301 Cisco® Certified Network Associate (CCNA®) exam.

 Attendees to N-305: CCNA Bootcamp will receive TechNow approved course materials and expert instruction.

Date/Locations:

Date/Time Event
02/10/2025 - 02/14/2025
08:00 -16:00
N-305: CCNA Bootcamp
TechNow, Inc, San Antonio TX
05/19/2025 - 05/23/2025
08:00 -16:00
N-305: CCNA Bootcamp
TechNow, Inc, San Antonio TX
08/11/2025 - 08/15/2025
08:00 -16:00
N-305: CCNA Bootcamp
TechNow, Inc, San Antonio TX
11/17/2025 - 11/21/2025
08:00 -16:00
N-305: CCNA Bootcamp
TechNow, Inc, San Antonio TX

Duration: 5 days

Course Objectives:

    • Identify the components of a computer network and describe their basic characteristics
    • Understand the model of host-to-host communication
    • Describe the features and functions of the Cisco Internetwork Operating Systems (IOS) software
    • Describe LANs and the role of switches within LANs
    • Describe Ethernet as the network access layer of TCP/IP and describe the operation of switches
    • Install a switch and perform the initial configuration
    • Describe the TCP/IP Internet layer, IPv4, its addressing scheme, and subnetting
    • Describe the TCP/IP Transport layer and Application layer
    • Explore functions of routing
    • Implement basic configuration on a Cisco router
    • Explain host-to-host communications across switches and routers
    • Identify and resolve common switched network issues and common problems associated with IPv4 addressing
    • Describe IPv6 main features and addresses, and configure and verify basic IPv6 connectivity
    • Describe the operation, benefits, and limitations of static routing
    • Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
    • Describe the application and configuration of inter-VLAN routing
    • Explain the basics of dynamic routing protocols and describe components and terms of Open Shortest Path First (OSPF)
    • Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
    • Configure link aggregation using EtherChannel
    • Describe the purpose of Layer 3 redundancy protocols
    • Describe basic WAN and VPN concepts
    • Describe the operation of Access Control Lists (ACLs) and their applications in the network
    • Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients and explain and configure Network Address Translation (NAT) on Cisco routers
    • Describe basic Quality of Service (QoS) concept
    • Describe network and device architectures and introduce virtualization
    • Introduce the concept of network programmability and Software-Defined Networking (SDN)
    • Configure basic IOS system monitoring tools
    • Describe the management of Cisco devices
    • Describe the current security threat landscape
    • Describe threat defense technologies
    • Implement a basic security configuration of the device management plane
    • Implement basic steps to harden network devices

Lab Objectives:

      • Get started with Cisco Command-Line Interface (CLI)
      • Observe How a Switch Operates
      • Perform Basic Switch Configuration
      • Implement the Initial Switch Configuration
      • Inspect TCP/IP Applications
      • Configure an Interface on a Cisco Router
      • Configure and Verify Layer 2 Discovery Protocols
      • Implement an Initial Router Configuration
      • Configure Default Gateway
      • Explore Packet Forwarding
      • Troubleshoot switch Media and Port Issues
      • Troubleshoot Port Duplex Issues
      • Configure Basic IPv6 Connectivity
      • Configure and Verify IPv4 Static Routes
      • Configure Iv6 Static Routes
      • Implement IPv4 Static Routing
      • Implement IPv6 Static Routing
      • Configure VLAN and Trunk
      • Troubleshoot VLANs and Trunk
      • Configure a Router on a Stick
      • Implement Multiple VLANs and Basic Routing Between the VLANs
      • Configure and Verify Single-Area OSPF
      • Configure and Verify EtherChannel
      • Improve Redundant Switched Topologies with EtherChannel
      • Configure and Verify IPv4 ACLs
      • Implement Numbered and Named IPv4 ACLs
      • Configure a Provider-Assigned IPv4 Address
      • Configure Static NAT
      • Configure Dynamic NAT and Port Address Translation (PAT)
      • Implement PAT
      • Log into the WLC
      • Monitor the WLC
      • Configure a Dynamic (VLAN) Interface
      • Configure a DHCP Scope
      • Configure a WLAN
      • Define a Remote Access Dial-In User Service (RADIUS) Server
      • Explore Management Options
      • Explore the Cisco DNA Center
      • Configure and Verify NTP
      • Configure System Message Logging
      • Create the Cisco IOS Image Backup
      • Upgrade Cisco IOS Image
      • Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the GUI
      • Secure Console and Remote Access
      • Enable and Limit Remote Access Connectivity
      • Secure Device Administrative Access
      • Configure and Verify Port Security
      • Implement Device Hardening

Prerequisites:

      • Familiarity in the following networking topics:
        • TCP/IP
        • IP Configuration
        • Peer-to-Peer Networking
        • Subnetting
        • Building a Routing Table
      • It is not required but highly recommended to have the following certifications:

Comments

Latest comments from students


User: dverzone

Instructor comments: Tim was excellent. He covered all of the required information and went in to greater detail when needed. His instruction was easy to follow, provided learning mnemonics that were easy to retain, and entertaining in a way that help provide easy recall of the information for study.

Facilities comments: Facilities were good, but a little crowded.


User: Trietdacvuong

Instructor comments: No Comments

Facilities comments: No comments


Liked the class?  Then let everyone know!

Course Overview:

An in-depth course on how to use and configure Cisco Firepower Threat Defense technology,  from device setup and configuration and including routing, high availability, Firepower Threat Defense migration, traffic control, and Network Address Translation (NAT).  Students implement advanced Next Generation Firewall (NGFW) and Next Generation Intrusion Prevention System (NGIPS) features, including network intelligence, file type detection, network based malware detection, and deep packet inspection.
Students will also learn how to configure site to site VPN, remote access VPN, and SSL decryption before moving on to detailed analysis, system administration, and troubleshooting.  This course combines lecture materials and hands on labs throughout to make sure that students are able to successfully deploy and manage the Cisco Firepower system.

It is a five-day instructor-led course that is aimed at providing network security engineers with the knowledge and skills that are needed to implement and maintain perimeter solutions that are based on Cisco Firepower security appliances. At the end of the course, students will be able to reduce risk to their IT infrastructure and applications using Cisco Firepower security appliance features, and provide detailed operations support for the Firepower appliance.

Attendees to N-485: In-Depth Securing Networks with Cisco Firepower Threat Defense NGFW will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Understand Sourcefire, Firepower 6.2, FireAMP, and Firepower Threat Defense (FTD)
  • Configure the Firepower Management Center (FMC)
  • Raise you confidence managing the Firepower Manager and Firepower tThreat Defense (FTD)
  • Describe the Cisco Firepower Systems infrastructure
  • Navigate the user interface and administrative features of the Cisco Firepower 6.2 system, including advanced analysis and reporting functionality to properly assess threats
  • Describe the System Configuration and Health policies and implement them
  • Describe the role Network Discovery (Firepower) technology plays in the Cisco devices
  • Describe, create, and implement objects for use in Access Control policies
  • Create DNS and URL policies and configure Sinkholes
  • Configure FTD policies such as Platform, Routing, Interface, Zones, PreFilter, QoS, NAT and Flex Config!
  • Describe advanced policy configuration and Firepower system configuration options
  • Configure Malware Policies to find and stop Malware
  • Understand Security Intelligence, and how to configure SI to stop attacks NOW!
  • Configure policies to find and stop Ransomware
  • Understand how to fine tune IPS policies
  • Understand how to find tun Snort Preprocessor policies (NAP)
  • Configure Correlation events, white rules, traffic profiles and create respective events and remediate them
  • Analyze events
  • Create reporting templates and schedule them
  • Configure backups, rule updates, Firepower Recommendations, URL updates, and more to run every week automatically
  • Set up external authentication for users using LDAP/Realms
  • Configuring system integration, realms, and identity sources
  • Configure FMC domains and implement them
  • Configure FTD HA with two FTD devices
  • SSL Policy – decrypt your traffic
  • AnyConnect and Site-to-Site VPN
  • Understand network and host based AMP.  Configure and analyze host based AMP
  • Understand Cisco Identity Services Engine (ISE)
  • Configure ISE and integrate with Cisco FMC identity policy using PxGrid

Prerequisites:

Comments

Latest comments from students


Liked the class?  Then let everyone know!