PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-949: Certified Firewall Analyst Course

Course Overview:

This is a hands-on course that covers many of the concepts of securing the perimeter of an organization. This includes concepts such as intrusion detection, packet filtering, and central logging.

A skills focus enables the student to better absorb the subject matter and perform better on the job.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of Firewalls.

This course is an excellent precursor to PA-215 Palo Alto Firewall Essentials FastTrack.

Attendees to TN-949: Certified Firewall Analyst Prep will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 5 days

Course Objectives:

  • Analyzing Network and Wireless Design
  • Creating and Auditing a Rulebase
  • Firewall Assessment and Penetration Testing
  • Host-Based Detection and DLP
  • Incident Detection and Analysis
  • IOS and Router Security
  • IPv6 and ICMPv6
  • Log Collection and Analysis
  • NAT and Proxies
  • Netfilter IPtables
  • Network Access Control
  • Network-Based Intrusion Detection
  • Packet Filters and Inspection
  • Packet Fragmentation
  • Perimeter Concepts and IP Fundamentals
  • Securing Hosts and Services
  • TCP/IP Protocols
  • VPN Design and Auditing
  • VPN Implementation

Course Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, networking and security  experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

Liked the class?  Then let everyone know!

TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs)

Course Overview:

This course, TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs), covers the two main objectives for those entering the wireless world, understanding the technology & addressing its security.  TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) takes advantage of the student’s existing expertise to provide a challenging introductory course. Covering a broad range of wireless networking topics & an introduction on how to secure a wireless LAN from hackers. To insure wireless availability you need to understand proper design choices & administration practices. To protect valuable information on your network you need to know how attacks occur & techniques used to secure your wireless network.

Attendees to TN-305: Designing, Implementing, Administering and Securing Wireless Local Area Networks (LANs) will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Radio Frequency (RF) Fundamentals
  • Spread Spectrum Technologies
  • 802.11 Network Architecture
  • Physical & MAC Layers
  • Hardware Installation, Configuration, & Management
  • Antennas & Accessories
  • Wireless Network Management
  • Troubleshooting Wireless LANs
  • Site Surveying
  • Wireless LAN Security
  • Organizations & Standards

Prerequisites:

Attendees should have network administration skills.  These skills can be obtained through TechNow’s N-205 & N-305: CCNA/ICND Training program or our highly respected cross platform TN-385: TCP/IP Analysis & Implementation course.

Comments

Latest comments from students

User: TMPRIESTLEY

Instructor comments: The instructor was very well versed on the topic and knew how to apply it to real-life examples. He led the labs and was very excited about the topic which kept the interest of myself and other class members. Sometimes his volume level was a little high- however the room the class was in was very small. Too small for a big personality!

Facilities comments: I was unaware of the facility changes, but that was at no fault of anyone since I was a drop-in for the course. They were very helpful and quick to mediate the issue.

Liked the class?  Then let everyone know!

TN-223: Advanced Shell Programming

 

Course Overview:

The course teaches students to use the sort, grep, sed, & awk utilities within Unix. Systems administrators, Unix users, & programmers benefit from the course showing them how to use the command line applications of sort, grep, sed, & awk commands as well as using sed & awk scripts that develop the users skills with the full power of these utilities.

Attendees to TN-223: Advanced Shell Programming will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 3 Days

Course Objectives:

  • Sorting files by line or field
  • Regular Expressions (meta character) with grep commands to locate specific lines in files
  • Performing non-interactive editing tasks with the sed command
  • Writing simple sed scripts to perform complex editing tasks
  • Using awk variables & arrays to sort data
  • Employing awk programs to manipulate numeric & textual data
  • Performing formatted printing in awk
  • Writing simple awk programs to write reports from data files
  • Using built-in awk functions & defining new functions
  • Write awk programs that make decisions based on numeric or string comparisons (branches & loops)
  • Grep, egrep extended metacharacters, combinations-lab advanced combinations- lab Sed
  • Basic commands- Lab, Advanced commands- Lab, Advanced scripting -Lab
  • Miscellaneous commands Tr, sort, cut, paste, pr -Lab

Prerequisites:

  • TN-125: Introduction to UNIX & Linux
  • TN 215: Shell Programming.
  • Students should have a basic knowledge of UNIX commands including rm, cp, man, cat, & mkdir. Navigating directory structure using commands such as ls, cp, & pwd. Creating and editing files with the vi editor or text editor. Use of basic programming constructs, & commands such as variables & loops & how to write a simple program in a programming language.

Comments

Latest comments from students

 

Liked the class?  Then let everyone know!

TN-515: Implementing Cybersecurity and Information Assurance Methodologies

  

Course Overview: 

Learn to protect yourself and your company against hackers, by learning their tools and techniques, and then testing your network.  This course is heavily based on Kali and primarily on Metasploit.  In TN-515: Implementing Cybersecurity and Information Assurance Methodologies class you will learn the step by step process that hackers use to assess your enterprise network, probe it & hack into it, utilizing a mixed-platform target environment including Windows, Linux, Solaris, and Cisco.  This course is 90% hacking, but  defenses for demonstrated hacks will be discussed.  If you want to know the ins and outs of the hacks presented in this course, then this is the course for you.

Attendees to TN-515: Implementing Cybersecurity and Information Assurance Methodologies Class Attendees will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Introduction to Pen Testing using the PTES model
  • Metasploit Basics
    • MSFconsole, MSFcli, Armitage, MSFpayload, MSFencode, NasmShell
  • Intelligence Gathering
    • Nmap, Databases in Metasploit, Port Scanning with Metasploit
  • Quick Intro to Ruby
    • Writing a simple Ruby script to create a custom scanner
  • Vulnerability Scanning
    • Importing Nessus Results
    • Scanning with Nessus from Within Metasploit
  • Exploitation
    • Using the Metasploit Framework and console to exploit
  • Meterpreter
    • Compromising a Windows System
    • Attacking MS SQL, xp_cmdshell
    • Dumping Usernames and Passwords, extracting and dumping hashes
    • Pass the Hash and Token Impersonation
    • Pivoting
    • Railgun
    • Using Meterpreter Scripts: Migrating a process, Killing AV, Persistence
  • Avoiding Detection
    • Creating Stand-Alone Binaries with MSFpayload
    • Encoding with MSFencode and Packers (go Green Bay:)
  • Exploitation Using Client Side Attacks
    • Introduction to Immunity Debugger
    • Using Immunity Debugger to Decipher NOP Shellcode
  • Metasploit Auxiliary Modules
  • Social Engineer Toolkit (SET)
    • Spear-Phishing, Web Attack
    • Creating a Multipronged Attack
  • Creating Your Own Module
    • Adapt an existing Module
    • Add some PowerShell and Run the Exploit
  • Meterpreter Scripting
  • Capture The Flag Exercise

Prerequisites:

  • This is an advanced  Cybersecurity and Information Assurance Course which requires basic Windows & UNIX competency
  • Certification or 2 years of experience in these operating systems is highly recommended
  • An understanding of TCP/IP

Comments

Latest comments from students

  

Liked the class?  Then let everyone know!