PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201)

  

 

Course Overview: PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Class is a three-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. This course prepares the student for the Palo Alto Networks Accredited Configuration Engineer (ACE) and progress to the Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the two day course PA-212: Palo Alto Networks Firewall Configure Extended Features. The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.

Attendees to the PA-213: Palo Alto Networks Firewall Install, Configure, and Manage (EDU-201) Training Course will receive TechNow approved course materials and expert instruction.

TechNow PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) immediately follows this course in the schedule so that you can take both courses in the same week.  We also offer a discount for attending both classes in the same week!!

Dates/Locations: No Events

Duration: 3 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall, including hands-on experience in configuring the security, networking, threat prevention, logging, and reporting features of the Palo Alto Networks Operating System (PAN-OS).

Day 1

  • Module 0 – Introduction & Overview
  • Module 1 – Platforms and Architecture
    • Single-Pass Architecture
    • Flow Logic
  • Module 2 – Initial Configuration
    • Initial Access to the System
    • Configuration Management
    • Licensing and Software Updates
    • Account Administration
  • Mod 3: Basic Interface Configuration
    • Security Zones
      Layer 2, Layer 3, Virtual Wire, and Tap
    • Subinterfaces
    • DHCP
    • Virtual Routers
  • Mod 4: Security and NAT Policies
    • Security Policy Configuration
    • Policy Administration
    • NAT (source and destination)

Day 2

  • Mod 5: Basic App-ID™
    • App-ID Overview
    • Application Groups and Filters
  • Mod 6: Basic Content-ID™
    • Antivirus
    • Anti-spyware
    • Vulnerability
    • URL Filtering
  • Mod 7: File Blocking and WildFire™
    • File Blocking
    • WildFire
  • Mod 8: Decryption
    • Certificate Management
    • Outbound SSL Decryption
    • Inbound SSL Decryption

       

       
Day 3

  • Mod 9: Basic User-ID™
    • Enumerating Users
    • Mapping Users to IP Addresses
    • User-ID Agent
  • Mod 10: Site-to-Site VPNs
    • IPSec Tunnels
  • Mod 11: Management and Reporting
    • Dashboard
    • Basic Logging
    • Basic Reports
    • Panorama
  • Mod 12: Active/Passive High
    • Availability
    • Configuring Active/Passive HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205)

  

 

Course Overview: PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Class is a two-day course that teaches students to configure and manage the entire line of Palo Alto Networks next-generation firewalls. Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.  This course prepares the student for Palo Alto Networks Certified Network Security Engineer (PCNSE).  Through hands-on training, students learn high end skills of how to integrate Palo Alto next-generation firewalls into their network infrastructure.  This is not a virtualized theoretical course.  This is hands-on, real world instruction, directly relevant to the DoD and Commercial implementations of Palo Alto Networks next-generation firewalls.

Each student is issued a physical Palo Alto firewall and a Cisco layer 3 switch at their desk.  Real hardware per student for real experience and real skill development.  TechNow provides a very comprehensive client infrastructure that includes Windows, Linux, and multiple packet sniffer agents.

This course sets up the foundation for the three day course PA-243: Palo Alto Networks Firewall Debug and Troubleshoot (EDU-311). The instructor for this course has been a lead in Unix kernel development to implement firewall and intrusion detection technologies.  Additionally, the instructor has taught several security appliance products and carries several SANS, ISC2, ISACA, Cisco, Unix, and Windows certifications.  Attendees to the PA-212: Palo Alto Networks Firewall Configure Extended Features (EDU-205) Training Course will receive TechNow approved course materials and expert instruction.

 

Dates/Locations: No Events

Duration: 2 days

Course Objectives:   Students attending this foundational-level training course will gain an in-depth knowledge of how to configure and manage their Palo Alto Networks firewall.  Students also will be instructed on the basics of implementing and managing GlobalProtect™ and active/ active high availability. Students will gain an in-depth knowledge of how to optimize their visibility and control of applications, users, and content.

Day 1

  • Module 0 – Introduction & Overview
  • Mod 1: Advanced Interface
    • Configuration
    • Advanced NAT
    • Policy-Based
    • Forwarding
    • Routing Protocols (OSPF)
  • Mod 2: App-ID™ –
    • Custom Applications
    • Defining New Application Signatures
    • Application Override
  • Mod 3: Advanced Content-ID™
    • Custom Threat Signatures
    • Data Filtering
    • DoS Protection
    • Botnet Report
  • Mod 4: Advanced User-ID™
    • Terminal Server Agent
    • Captive Portal
    • XML API

Day 2

  • Mod 5: Quality of Service
    • Configuring Quality of Service
  • Mod 6: GlobalProtect™
    • Implementation of GlobalProtect
    • Install and Configure Portal, Gateway, and Agents
  • Mod 7: Monitoring and Reporting
    • Log Forwarding
    • SNMP
    • Reporting
  • Mod 8: Active/Active High Availability
    • Configuring Active/Active HA

 

Prerequisites:

This course is in no way associated with Palo Alto Networks, Inc.

Comments

Latest comments from students

Like the class?  Then let everyone know!

TN-939: Hacker Techniques, Exploits, and Incident Handling Course

Course Overview:

A skills focus enables the student to better absorb the subject matter and perform successfully on the exam.   This is not death by power point. The course is aligned with information assurance operators and executing hands-on labs. Lecture and labs walk the student through the knowledge required to truly understand the mechanics of the attacks and the effectiveness.  Students then gain network experience and use sniffing to help exemplify the benefit of learning wired and wireless security configurations. The course concludes with exercising real attack strategies to demonstrate the techniques acquired throughout the course.

Attendees to TN-939:  Hacker Techniques, Exploits, and Incident Handling will receive TechNow approved course materials and expert instruction.

Date/Locations:

No Events

Duration: 9 days

Course Objectives:

  • Backdoors & Trojan Horses
  • Buffer Overflows
  • Covering Tracks: Networks
  • Covering Tracks: Systems
  • Denial of Service Attacks
  • Exploiting Systems Using Netcat
  • Format String Attacks
  • Incident Handling Overview and Preparation
  • Incident Handling Phase 2: Identification
  • Incident Handling Phase 3: Containment
  • Incident Handling: Recovering and Improving Capabilities
  • IP Address Spoofing
  • Network Sniffing
  • Password Attacks
  • Reconnaissance
  • Rootkits
  • Scanning: Host Discovery
  • Scanning: Network and Application Vulnerability scanning and tools
  • Scanning: Network Devices (Firewall rules determination, fragmentation, and IDS/IPS evasion)
  • Scanning: Service Discovery
  • Session Hijacking, Tools and Defenses
  • Types of Incidents
  • Virtual Machine Attacks
  • Web Application Attacks
  • Worms, Bots & Bot-Nets

Prerequisites:

  • GSEC or equivalent experience
  • UNIX, Windows, Networking, and Security Experience
  • This is a hands-on skill course requiring comfort with command line interaction and network communications

Comments

Latest comments from students

User: m_jurrens

Instructor comments: Both instructors Mr. Askey and Mr. Hackney, were very good. the open learning environment was extremely productive and I felt we all learned far more that we ever would out of a structured rote memorization course.

User: natebonds

Instructor comments: Both Mr. Askey and Hackney were extremely knowledgeable. They were also extremely interested in helping each student learn. I was particularly impressed with the way they tailored the course to optimize our time since we weren't testing. I feel like I know much much more than I did when the class started.

Facilities comments: The facilities were fine. I would have preferred it be closer to Lackland.

Liked the class?  Then let everyone know!

VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives

 

Course Overview:

This course explores the VMware Infrastructure and related security, which consists of VMware ESX Server & VMware Virtual Center Server. We will look at both the design environments and operational processes of the VMware Infrastructure including security. This course provides IT architects with the insight needed to tackle tough issues in server virtualization such as virtual machine technologies, storage infrastructure, and designing clustered environments with security practices included. Extensive hands-on labs provide for a rich student experience.

Hypervisors and their supporting environment require attention to security due to the aggregated risk of hosting multiple virtual servers. This course explores the security of virtualized environments. Student configure ESXi by learning to manage the security and risk between ESXi, virtual servers and security integration of ESXi to the physical network infrastructure including appropriate segregation from other sensitive networks and management networks. How to configure virtual networks when some hosts are dual or multi homed, but internally segregate between the two or more connected networks with different security levels. Appropriate integration of zero-clients and thin clients. Configuration of defensive measures on hosts, servers, hypervisors within the virtual environment and practices for those guarding it externally. Integration of Active Directory and other AAA/CIA related services relative to a virtualized environment.

Students are also walked through DoD ESXi Security Technical Implementation Guide (STIG). Introduction to the impact of Intel Trusted Execution Technology integrated with ESXi to create a trusted platform for virtual machines. Additionally the instructor walks the students through NIST Special Publication 800-125A: Security Recommendations for Hypervisor Deployment on Servers, and NIST Special Publication 800-125B: Secure Virtual Network Configuration for Virtual Machine (VM) Protection.

Attendees to “VM-345: VMware Infrastructure Security: VMware Install, Configure, and Manage with Security Objectives” will receive TechNow approved course materials and expert instruction.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

• Virtual Infrastructure Overview
• ESX and ESXi Server Installation
• Configuration of Networking, Scalability and Security
• Storage
• Install and Configure vCenter Server and Components
• Creation, Deployment, Management, and Migration of Virtual Machines
• Utilize vCenter Server for Resource Management
• Utilize vCenter Server for Virtual Machine Access Control and User Managment
• Use vCenter Server to increase scalability
• Monitoring Your Environment
• Data & Availability Protection Troubleshooting
• Use VMware vCenter Update Manager to apply ESXi patches
• Use vCenter Server to manage vMotion, HA, DRS and data protection.

N-515: Implementing Cisco Enterprise Wireless Networks (ENWLSI)

Course Overview:

The Implementing Cisco Enterprise Wireless Networks (ENWLSI) course gives you the knowledge and skills needed to create a secure wireless network infrastructure and troubleshoot any related issues. You’ll learn how to implement and fortify a wireless network infrastructure using Cisco Identity Service Engine (ISE), Cisco Prime Infrastructure (PI), and Cisco Connect Mobile Experience to monitor and troubleshoot network issues.

Attendees to N-515: Implementing Cisco Enterprise Wireless Network (ENWLSI) will receive TechNow approved course materials, expert instruction, and prepare you to take the 300-430 Implementing Cisco Enterprise Wireless Networks (ENWLSI) exam, which is part of the CCNP® Enterprise certification and the Cisco Certified Specialist – Enterprise Wireless Implementation certification.

Dates/Locations:

No Events

Duration: 5 Days

Course Objectives:

  • Implement network settings to provide a secure wireless network infrastructure
  • Implement a secure wireless client and troubleshoot wireless client connectivity issues
  • Implement and troubleshoot QoS in wireless networks
  • Implement and troubleshoot advanced capabilities in wireless network services

Prerequisites:

 

Comments

Latest comments from students

Liked the class?  Then let everyone know!