Here are the General Unix course offerings:
Course Overview:
As VoIP (Voice-over IP) is integrated into the operations of many missions, it is imperative to understand its security ramifications. In the N-595: VoIP Security Analysis and Design class the objectives are designed for those who are chartered with the responsibility of securing networks and application environments that incorporate VoIP. Topics include how VoIP works, its interactions with the network, its vulnerabilities and mitigations. Focus is on leading open source and proprietary technologies utilizing Asterisk and Cisco and the protocols SIP, H.323, RTP, MGCP, and Skinny. Other protocols such as Nortel's UNIStim will be addressed. As for Cisco, security pieces in the VoIP CallManager servers, Catalyst switches, IOS-based routers, and ASA firewalls, amounts to several different platforms, each with its own management interface and lockdown procedures. Various open source tools including those in BackTrack are used for VoIP attacks. A task list of actions for securing enterprise VoIP is carried out in hands-on labs, performed on Cisco phones, routers, switches, and ASA firewalls.
Attendees to N-595: VoIP Security Analysis and Design will receive TechNow approved course materials and expert instruction.
Dates/Locations:
No Events
Duration: 5 Days
Course Objectives:
- VoIP Architecture
- VoIP Signaling and media protocols
- Common VoIP authentication mechanisms
- Common VoIP encryption techniques
- VoIP protocol analysis with Wireshark
- Maintaining QoS while mitigating DoS
- VoXML, XML, and application integration security
- Converged network security design and implementation
- Impact of NAT and firewalls
- SIP, H.323, and MGCP vulnerabilities
- VPN, IPsec and SRTP to secure VoIP services
- Penetration testing with open source tools
- Attacks for Eavesdropping, call redirection, and DoS
- Design of hacked firmware virtualization layer
- Concise lockdown steps for network hardware and VoIP
Prerequisites:
- This is an advanced Information Security Course which requires basic Windows & UNIX competency
- Certification or 2 years of experience in these operating systems is highly recommended
- As well as an understanding of TCP/IP
Comments
Latest comments from students
Liked the class? Then let everyone know!
Course Overview:
The UNIX Security Administrator Prep is a hands-on course that covers how to secure and audit UNIX and Linux operating systems. This includes concepts such as Rootkits, Buffer overflows, and monitoring UNIX/Linux systems.
Attendees to TN-959: Unix Security Administratorwill receive TechNow approved course materials and expert instruction.
Date/Locations:
No Events
Duration: 5 days
Course Objectives:
- AIDE
- Apache
- Best Practices for Kernel Tuning and Warning Banners
- Boot Services
- Chroot()
- DNS- BIND
- DNSSec
- Evidence Collection and Preservation
- Forensic Analysis
- Forensic Preparation and Incident Handling
- Host Based Firewalls – iptables
- Intro to Forensics
- OS Install and Patching
- Physical, User Account, and Password Access Control
- Se Linux
- Sendmail
- SSH
- Stack Smashing
- Sudo
- Syslog-NG
- UNIX Logging
Course Prerequisites:
- GSEC or equivalent experience
- UNIX, Windows, networking, and security experience
- This is a hands-on skill course requiring comfort with command line interaction and network communications
Comments
Latest comments from students
User: wbcarter
Instructor comments: Good Stuff. Thanks!
User: ryuhas
Instructor comments: Very Good Instructor
Facilities comments: Facilities was great. Location had a lot to be desired. To much traffic and accidents trying to get here.
Liked the class? Then let everyone know!
Course Overview:
This course, TN-385: TCP/IP Analysis & Implementation, provides students with a comprehensive technical introduction to TCP/IP & the interworkings of TCP/IP application to UNIX, Linux and Windows in a network environment. This course begins by providing a comprehensive protocol stack analysis. It continues with extensive hands-on exercises needed to configure TCP/IP on UNIX and Windows based networks.
Attendees to TN-385: TCP/IP Analysis & Implementation will receive TechNow approved course materials and expert instruction.
Dates/Locations:
No Events
Duration: 5 Days
Course Objectives:
- A thorough comprehension of each level of the protocol stack
- Configuring UNIX & Windows to access internetworks
- Configuring & setting up a Cisco router
- Properly implementing subnets to avoid ongoing maintenance headaches
- Routing & routing protocols, RIP, OSPF, and IGRP
- How to troubleshoot a wide range of routing problems
- All major TCP/IP application services including: FTP, TELNET, SNMP, NFS, DNS, DHCP, & WINS
- How to avoid common internetworking problems
- How to troubleshoot TCP/IP networks using protocol analysis techniques – snoop on Sun Workstation & Network Monitor on Windows.
- How to design, build, configure, & manage TCP/IP internetworks
- Applying a structured methodology for troubleshooting TCP/IP internetworks
- ACL's on Cisco routers
Prerequisites:
- Students should have good end-user skills in TCP/IP (FTP, TELNET, RLOGON, & MAIL).
Comments
Latest comments from students
Liked the class? Then let everyone know!
Course Overview:
The C-215: Introduction to C Programming course is a hands-on course providing a complete introduction to the ANSI C programming language, focusing on quickly developing the practical skills needed to create real-world solutions. Our hands-on labs are designed to promote retention and challenge students to apply their skills to new situations.
Attendees to C-215: Introduction to C Programming will receive TechNow approved course materials and expert instruction.
Dates/Locations:
No Events
Duration: 5 days
Course Objectives:
- What is C?
- Basics of Program Writing
- Style
- Basic Declarations & Expressions
- Arrays, Qualifiers & Reading Numbers
- Decision & Control Statements
- Programming Process
- More Controls Statements
- Variable Scope & Functions
- C Preprocessor
- Bit Operations
- Advanced Types
- Simple Pointers
- File Input/Output
- Debugging & Optimization
- Floating Point
Prerequisites:
Before attending this course, you should be able to use basic UNIX commands and have previous programming experience language, or have taken our Introduction to Computer Progamming class.
Comments
Latest comments from students
User: jangles1337
Instructor comments: Pretty knowledgeable on a number of things. Could have had a better in depth understanding of the material.
Facilities comments: Was a hotel so it was pretty noisy some times.
User: ldorsey
Instructor comments: Great guy full of knowledge